СПОСОБ УСРЕДНЕНИЯ МОДЕЛИ ИМПУЛЬСНЫХ ПРЕОБРАЗОВАТЕЛЕЙ ПОСТОЯННОГО НАПРЯЖЕНИЯ
The mode of model averaging is proposed which allows to analyze the processes at pulse dc converters from general positions. Obtained model contains both parameters of average variable states, their ripples during period of steadystate regime and parameters of time intervals of converter state. The...
Збережено в:
| Дата: | 2017 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Інститут електродинаміки НАН України, Київ
2017
|
| Теми: | |
| Онлайн доступ: | https://techned.org.ua/index.php/techned/article/view/719 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technical Electrodynamics |
Репозитарії
Technical Electrodynamics| Резюме: | The mode of model averaging is proposed which allows to analyze the processes at pulse dc converters from general positions. Obtained model contains both parameters of average variable states, their ripples during period of steadystate regime and parameters of time intervals of converter state. The range of ratio between time constant of converter circuit and its operation period is grounded in which the error of model calculations is not more than 3%. The calculations using proposed mode and method of schematic simulation are fulfilled by the example of simplest stepdown converter that confirms the high precision of results coincidence at mentioned range of parameters. References 9, table 1, figures 2. |
|---|