КОРРЕКЦИЯ ПОГРЕШНОСТЕЙ ПРИ ДИСТАНЦИОННОМ ИЗМЕРЕНИИ РАЗНОСТИ ФАЗ МЕЖДУ ЭЛЕКТРИЧЕСКИМИ СИГНАЛАМИ
The errors of the measurement of the phase difference between the alternating currents flowing through the remote objects of control are analyzed. A substantial impact on the result of the measurement values of the clock frequency of remote measurement modules is noted. It is shown that the additive...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Інститут електродинаміки НАН України, Київ
2016
|
| Теми: | |
| Онлайн доступ: | https://techned.org.ua/index.php/techned/article/view/802 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technical Electrodynamics |
Репозитарії
Technical Electrodynamics| Резюме: | The errors of the measurement of the phase difference between the alternating currents flowing through the remote objects of control are analyzed. A substantial impact on the result of the measurement values of the clock frequency of remote measurement modules is noted. It is shown that the additive component of error is unacceptably high, which doesn’t satisfy the requirements of the problem diagnostic of the condition of high-voltage capacitor isolation under operating voltage. A method of reducing the error based on the multiplicative correction of measurements of time intervals from the start of sampling until the transition the input signals through zero is proposed. Usage of this method can reduce the error to a level that ensures the necessary metrological characteristics of the measuring system. References 8, figure 1. |
|---|