МОДЕЛЮВАННЯ ФІЗИЧНИХ ПРОЦЕСІВ У ПІЧНОМУ АГРЕГАТІ З ЕЛЕКТРОМАГНІТНИМ ПЕРЕМІШУВАННЯМ РІДКОГО МЕТАЛУ
Multiphysical 3D modeling of electromagnetic, hydrodynamic and heating processes in reverberatory furnace for aluminum with combined electromagnetic stirrer of liquid metal, which creates traveling or pulsating magnetic fields depending on power type (multiphase or single phase power supply respecti...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Інститут електродинаміки НАН України, Київ
2016
|
| Теми: | |
| Онлайн доступ: | https://techned.org.ua/index.php/techned/article/view/886 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technical Electrodynamics |
Репозитарії
Technical Electrodynamics| Резюме: | Multiphysical 3D modeling of electromagnetic, hydrodynamic and heating processes in reverberatory furnace for aluminum with combined electromagnetic stirrer of liquid metal, which creates traveling or pulsating magnetic fields depending on power type (multiphase or single phase power supply respectively) was performed. Four regimes of work of this stirrer, by which stirring of metal in furnace tank is carried out under the influence of separately traveling and separately pulsating magnetic field, in the regime of sequential action of these fields, and in case of reverse alternation in time of traveling magnetic field were investigated. The situation was modeled, according to which liquid metal in furnace was heated from above without stirrer over a period of time, after that heating was disabled and the stirrer was enabled simultaneously, which brought eventually to temperature equalization of metal in furnace tank. Established that using of regimes of stirrer with switching of magnetic fields allows a significant increase the effectiveness of stirring of melt in furnace tank. References 4, figures 3. |
|---|