КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ
In this paper, the authors considered the most common types of planar magnetic inductive elements, and analyzed their advantages and disadvantages. Actuality use this type of inductive elements as ballasts of fluorescent lamps. A computer simulation of inductive element planar system using magnetic...
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Інститут електродинаміки НАН України, Київ
2015
|
| Schlagworte: | |
| Online Zugang: | https://techned.org.ua/index.php/techned/article/view/914 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Technical Electrodynamics |
Institution
Technical Electrodynamics| Zusammenfassung: | In this paper, the authors considered the most common types of planar magnetic inductive elements, and analyzed their advantages and disadvantages. Actuality use this type of inductive elements as ballasts of fluorescent lamps. A computer simulation of inductive element planar system using magnetic environment nickel-zinc ferrite brand CDM 5005 Based unleashed axisymmetric problem is obtained depending on changes in inductance and quality factor of a planar element frequency, and the influence of geometrical dimensions of the model to these parameters. It is shown that fill the space between the turns of the coil inductance increases by more than half. and reduce the size of inductive elements more than three times. Due to the reduced length of the conductive material decreases the resistance of the coil. The calculation of the magnetic characteristics of the ballast using a computer model makes it possible to simplify the selection of non-magnetic gap size. References 8, table 1, figures 6. |
|---|