КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ

In this paper, the authors considered the most common types of planar magnetic inductive elements, and analyzed their advantages and disadvantages. Actuality use this type of inductive elements as ballasts of fluorescent lamps. A computer simulation of inductive element planar system using magnetic...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2015
Автори: Андрійчук, В.А., Наконечний , М.С.
Формат: Стаття
Мова:Ukrainian
Опубліковано: Інститут електродинаміки НАН України, Київ 2015
Теми:
Онлайн доступ:https://techned.org.ua/index.php/techned/article/view/914
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Technical Electrodynamics

Репозитарії

Technical Electrodynamics
id oai:ojs2.ted.new-point.com.ua:article-914
record_format ojs
spelling oai:ojs2.ted.new-point.com.ua:article-9142022-12-30T13:38:10Z COMPUTER SIMULATION INDUCTIVE ELEMENT OF THE PLANARY SYSTEM КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ Андрійчук, В.А. Наконечний , М.С. planar system inductive ballast inductance quality factor планарна система індуктивний баласт індуктивність добротність In this paper, the authors considered the most common types of planar magnetic inductive elements, and analyzed their advantages and disadvantages. Actuality use this type of inductive elements as ballasts of fluorescent lamps. A computer simulation of inductive element planar system using magnetic environment nickel-zinc ferrite brand CDM 5005 Based unleashed axisymmetric problem is obtained depending on changes in inductance and quality factor of a planar element frequency, and the influence of geometrical dimensions of the model to these parameters. It is shown that fill the space between the turns of the coil inductance increases by more than half. and reduce the size of inductive elements more than three times. Due to the reduced length of the conductive material decreases the resistance of the coil. The calculation of the magnetic characteristics of the ballast using a computer model makes it possible to simplify the selection of non-magnetic gap size. References 8, table 1, figures 6. Проведено комп’ютерне моделювання індуктивного елемента планарної системи з використанням магнітногосередовища нікель-цинкового фериту. На основі розв’язаної осесиметричної задачі отримано залежності зміни індуктивності та добротності планарного елемента від частоти та показано вплив геометричних розмірівмоделі на ці параметри. Доведено, що запропонована конструкція магнітопроводу дозволяє отримувати необхідну індуктивність та добротність планарного елемента при заданих геометричних розмірах. Библ. 8, табл. 1, рис. 6. Інститут електродинаміки НАН України, Київ 2015-03-03 Article Article application/pdf https://techned.org.ua/index.php/techned/article/view/914 Tekhnichna Elektrodynamika; No. 2 (2015): TEKHNICHNA ELEKTRODYNAMIKA; 083 ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА; № 2 (2015): ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА; 083 2218-1903 1607-7970 uk https://techned.org.ua/index.php/techned/article/view/914/791 Авторське право (c) 2022 ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА https://creativecommons.org/licenses/by-nc-nd/4.0
institution Technical Electrodynamics
baseUrl_str
datestamp_date 2022-12-30T13:38:10Z
collection OJS
language Ukrainian
topic планарна система
індуктивний баласт
індуктивність
добротність
spellingShingle планарна система
індуктивний баласт
індуктивність
добротність
Андрійчук, В.А.
Наконечний , М.С.
КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ
topic_facet planar system
inductive ballast inductance
quality factor
планарна система
індуктивний баласт
індуктивність
добротність
format Article
author Андрійчук, В.А.
Наконечний , М.С.
author_facet Андрійчук, В.А.
Наконечний , М.С.
author_sort Андрійчук, В.А.
title КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ
title_short КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ
title_full КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ
title_fullStr КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ
title_full_unstemmed КОМП’ЮТЕРНЕ МОДЕЛЮВАННЯ ІНДУКТИВНОГО ЕЛЕМЕНТА ПЛАНАРНОЇ СИСТЕМИ
title_sort комп’ютерне моделювання індуктивного елемента планарної системи
title_alt COMPUTER SIMULATION INDUCTIVE ELEMENT OF THE PLANARY SYSTEM
description In this paper, the authors considered the most common types of planar magnetic inductive elements, and analyzed their advantages and disadvantages. Actuality use this type of inductive elements as ballasts of fluorescent lamps. A computer simulation of inductive element planar system using magnetic environment nickel-zinc ferrite brand CDM 5005 Based unleashed axisymmetric problem is obtained depending on changes in inductance and quality factor of a planar element frequency, and the influence of geometrical dimensions of the model to these parameters. It is shown that fill the space between the turns of the coil inductance increases by more than half. and reduce the size of inductive elements more than three times. Due to the reduced length of the conductive material decreases the resistance of the coil. The calculation of the magnetic characteristics of the ballast using a computer model makes it possible to simplify the selection of non-magnetic gap size. References 8, table 1, figures 6.
publisher Інститут електродинаміки НАН України, Київ
publishDate 2015
url https://techned.org.ua/index.php/techned/article/view/914
work_keys_str_mv AT andríjčukva computersimulationinductiveelementoftheplanarysystem
AT nakonečnijms computersimulationinductiveelementoftheplanarysystem
AT andríjčukva kompûternemodelûvannâínduktivnogoelementaplanarnoísistemi
AT nakonečnijms kompûternemodelûvannâínduktivnogoelementaplanarnoísistemi
first_indexed 2025-09-24T17:39:01Z
last_indexed 2025-09-24T17:39:01Z
_version_ 1844167879075823616