Исследование проволочного радиатора с тепловыми трубами для средств вычислительной техники
One approach to improving heat dissipation efficiency from computing components such as high-performance microprocessors is proposed. A prototype wire radiator was studied, consisting of copper wire with a diameter of 0.12 mm wound around a frame of two heat pipes, each 6 mm in diameter and 500 mm l...
Збережено в:
| Дата: | 2004 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2004
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2004.6.29 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| Резюме: | One approach to improving heat dissipation efficiency from computing components such as high-performance microprocessors is proposed. A prototype wire radiator was studied, consisting of copper wire with a diameter of 0.12 mm wound around a frame of two heat pipes, each 6 mm in diameter and 500 mm long. It was shown that the temperature drop along the heat pipe is nearly 60 times smaller than that of a solid copper rod and 200 times smaller than that of a copper tube of the same dimensions. The use of wire finning allowed the average temperature in the heating zone to be reduced by an additional one-third at a heater power of 49.2 W. |
|---|