Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР

• Дата: 2020
• Автори: Nikolaenko, Yurii, Baranyuk, Alexandr, Reva, Sergey
• Формат: Стаття
• Мова: Ukrainian
• Опубліковано: PE "Politekhperiodika", Book and Journal Publishers 2020
• Теми: CFD-моделювання; рідинний теплообмінник; температурне поле; тепловий опір; приймально-передавальний модуль; НВЧ-елемент
• Онлайн доступ: https://www.tkea.com.ua/index.php/journal/article/view/TKEA2020.1-2.37
• Назва журналу: Technology and design in electronic equipment

The paper presents the results on numerical simulation of the temperature field of a cold plate type liquid heat exchanger for a multichannel transmitter/receiver module. Each side of the cold plate carries 8 local microwave fuel elements with a heat dissipation capacity of 11 W each and one block with low-power electronic elements (total power of all elements — 50 W), installed symmetrically on both sides. The total heat dissipation capacity is 276 W. The cold plate is cooled by pumping a liquid heat carrier (Antifreeze A 65) through a curved cooling channel of rectangular cross-section made inside the liquid heat exchanger. The study was conducted at a working fluid flow rate of 2, 4, 6, 8 and 10 l/min. Numerical simulation allowed obtaining the temperature distribution of the mounting surfaces of the cold plate and determining the values of the working fluid flow rate, which provide effective cooling of the mounting surfaces. It is shown that at a flow rate of 4 l/min, the temperature values at the installation sites of local microwave elements do not exceed 64°C. The total thermal resistance of the cooling system based on a liquid heat exchanger is from 0.063 to 0.028°C/W with a flow rate from 2 to 10 l/min, respectively.