Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР
The paper presents the results on numerical simulation of the temperature field of a cold plate type liquid heat exchanger for a multichannel transmitter/receiver module. Each side of the cold plate carries 8 local microwave fuel elements with a heat dissipation capacity of 11 W each and one block w...
Saved in:
| Date: | 2020 |
|---|---|
| Main Authors: | , , |
| Format: | Article |
| Language: | Ukrainian |
| Published: |
PE "Politekhperiodika", Book and Journal Publishers
2020
|
| Subjects: | |
| Online Access: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2020.1-2.37 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Technology and design in electronic equipment |
Institution
Technology and design in electronic equipment| id |
oai:tkea.com.ua:article-112 |
|---|---|
| record_format |
ojs |
| spelling |
oai:tkea.com.ua:article-1122025-08-02T16:35:56Z Thermal characteristics of the liquid heat exchanger for the transmitter/reciever module of AРAA Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР Nikolaenko, Yurii Baranyuk, Alexandr Reva, Sergey CFD modeling liquid heat exchanger temperature field thermal resistance transmitter/receiver module microwave element CFD-моделювання рідинний теплообмінник температурне поле тепловий опір приймально-передавальний модуль НВЧ-елемент The paper presents the results on numerical simulation of the temperature field of a cold plate type liquid heat exchanger for a multichannel transmitter/receiver module. Each side of the cold plate carries 8 local microwave fuel elements with a heat dissipation capacity of 11 W each and one block with low-power electronic elements (total power of all elements — 50 W), installed symmetrically on both sides. The total heat dissipation capacity is 276 W. The cold plate is cooled by pumping a liquid heat carrier (Antifreeze A 65) through a curved cooling channel of rectangular cross-section made inside the liquid heat exchanger. The study was conducted at a working fluid flow rate of 2, 4, 6, 8 and 10 l/min. Numerical simulation allowed obtaining the temperature distribution of the mounting surfaces of the cold plate and determining the values of the working fluid flow rate, which provide effective cooling of the mounting surfaces. It is shown that at a flow rate of 4 l/min, the temperature values at the installation sites of local microwave elements do not exceed 64°C. The total thermal resistance of the cooling system based on a liquid heat exchanger is from 0.063 to 0.028°C/W with a flow rate from 2 to 10 l/min, respectively. Проведено чисельне моделювання температурного поля та загального теплового опору рідинного теплообмінника у вигляді холодної плити із вбудованим вигнутим одинарним контуром охолодження та двостороннім розташуванням тепловиділяючих НВЧ-елементів, призначеного для охолодження багатоканального приймально-передавального модуля. Дослідження проводилися за різних значень витрат рідкого теплоносія (Тосол А 65). PE "Politekhperiodika", Book and Journal Publishers 2020-04-28 Article Article Peer-reviewed Article application/pdf https://www.tkea.com.ua/index.php/journal/article/view/TKEA2020.1-2.37 10.15222/TKEA2020.1-2.37 Technology and design in electronic equipment; No. 1–2 (2020): Tekhnologiya i konstruirovanie v elektronnoi apparature; 37-44 Технологія та конструювання в електронній апаратурі; № 1–2 (2020): Технология и конструирование в электронной аппаратуре; 37-44 3083-6549 3083-6530 10.15222/TKEA2020.1-2 uk https://www.tkea.com.ua/index.php/journal/article/view/TKEA2020.1-2.37/102 Copyright (c) 2020 Nikolaenko Yu. E., Baranyuk О. V., Reva S. A. http://creativecommons.org/licenses/by/4.0/ |
| institution |
Technology and design in electronic equipment |
| baseUrl_str |
|
| datestamp_date |
2025-08-02T16:35:56Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
CFD-моделювання рідинний теплообмінник температурне поле тепловий опір приймально-передавальний модуль НВЧ-елемент |
| spellingShingle |
CFD-моделювання рідинний теплообмінник температурне поле тепловий опір приймально-передавальний модуль НВЧ-елемент Nikolaenko, Yurii Baranyuk, Alexandr Reva, Sergey Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР |
| topic_facet |
CFD modeling liquid heat exchanger temperature field thermal resistance transmitter/receiver module microwave element CFD-моделювання рідинний теплообмінник температурне поле тепловий опір приймально-передавальний модуль НВЧ-елемент |
| format |
Article |
| author |
Nikolaenko, Yurii Baranyuk, Alexandr Reva, Sergey |
| author_facet |
Nikolaenko, Yurii Baranyuk, Alexandr Reva, Sergey |
| author_sort |
Nikolaenko, Yurii |
| title |
Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР |
| title_short |
Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР |
| title_full |
Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР |
| title_fullStr |
Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР |
| title_full_unstemmed |
Теплові характеристики рідинного теплообмінника приймально-передавального модуля АФАР |
| title_sort |
теплові характеристики рідинного теплообмінника приймально-передавального модуля афар |
| title_alt |
Thermal characteristics of the liquid heat exchanger for the transmitter/reciever module of AРAA |
| description |
The paper presents the results on numerical simulation of the temperature field of a cold plate type liquid heat exchanger for a multichannel transmitter/receiver module. Each side of the cold plate carries 8 local microwave fuel elements with a heat dissipation capacity of 11 W each and one block with low-power electronic elements (total power of all elements — 50 W), installed symmetrically on both sides. The total heat dissipation capacity is 276 W. The cold plate is cooled by pumping a liquid heat carrier (Antifreeze A 65) through a curved cooling channel of rectangular cross-section made inside the liquid heat exchanger. The study was conducted at a working fluid flow rate of 2, 4, 6, 8 and 10 l/min. Numerical simulation allowed obtaining the temperature distribution of the mounting surfaces of the cold plate and determining the values of the working fluid flow rate, which provide effective cooling of the mounting surfaces. It is shown that at a flow rate of 4 l/min, the temperature values at the installation sites of local microwave elements do not exceed 64°C. The total thermal resistance of the cooling system based on a liquid heat exchanger is from 0.063 to 0.028°C/W with a flow rate from 2 to 10 l/min, respectively. |
| publisher |
PE "Politekhperiodika", Book and Journal Publishers |
| publishDate |
2020 |
| url |
https://www.tkea.com.ua/index.php/journal/article/view/TKEA2020.1-2.37 |
| work_keys_str_mv |
AT nikolaenkoyurii thermalcharacteristicsoftheliquidheatexchangerforthetransmitterrecievermoduleofaraa AT baranyukalexandr thermalcharacteristicsoftheliquidheatexchangerforthetransmitterrecievermoduleofaraa AT revasergey thermalcharacteristicsoftheliquidheatexchangerforthetransmitterrecievermoduleofaraa AT nikolaenkoyurii teplovíharakteristikirídinnogoteploobmínnikaprijmalʹnoperedavalʹnogomodulâafar AT baranyukalexandr teplovíharakteristikirídinnogoteploobmínnikaprijmalʹnoperedavalʹnogomodulâafar AT revasergey teplovíharakteristikirídinnogoteploobmínnikaprijmalʹnoperedavalʹnogomodulâafar |
| first_indexed |
2025-09-24T17:30:14Z |
| last_indexed |
2025-09-24T17:30:14Z |
| _version_ |
1850410196664320000 |