Технология изготовления термоэлектрических модулей Пельтье повышенной надежности
An evaluation was conducted of the strength parameters and natural frequencies of Peltier thermoelectric modules (TEMs) based on Bi–Te–Se–Sb with single-sided and double-sided fixation of the working faces. A technology has been developed for producing homogeneous crystals of these alloys with Q-fac...
Gespeichert in:
| Datum: | 2004 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
PE "Politekhperiodika", Book and Journal Publishers
2004
|
| Schlagworte: | |
| Online Zugang: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2004.4.57 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Technology and design in electronic equipment |
Institution
Technology and design in electronic equipment| Zusammenfassung: | An evaluation was conducted of the strength parameters and natural frequencies of Peltier thermoelectric modules (TEMs) based on Bi–Te–Se–Sb with single-sided and double-sided fixation of the working faces. A technology has been developed for producing homogeneous crystals of these alloys with Q-factors of (3.0...3.2)×10⁻³ K⁻¹ (300 K), a diameter of 28–38 mm, enhanced mechanical strength, and a yield rate of 69–75%. The adhesion properties of the electrical contact and anti-diffusion layers have been improved. TEs with a minimum operating life of 12,000 hours in continuous mode and 3,000 hours in cyclic mode have been obtained. |
|---|