Получение тонких пленок Si3N4 при пониженном давлении на пластинах диаметром до 200 мм
The influence of silicon nitride deposition condition on parameters of the obtained films has been investigated. It has been found that the deposition rate of silicon nitride films decreases with deposition temperature decreasing, and at the same time the within wafer thickness uniformity improves....
Gespeichert in:
| Datum: | 2012 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
PE "Politekhperiodika", Book and Journal Publishers
2012
|
| Schlagworte: | |
| Online Zugang: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2012.6.34 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Technology and design in electronic equipment |
Institution
Technology and design in electronic equipment| Zusammenfassung: | The influence of silicon nitride deposition condition on parameters of the obtained films has been investigated. It has been found that the deposition rate of silicon nitride films decreases with deposition temperature decreasing, and at the same time the within wafer thickness uniformity improves. It allows performing the reproducible deposition of silicon nitride films with thickness of less than 10 nm. It has been found that in order to decrease the oxidation depth of silicon nitride, it is appropriate to carry out the oxidation under 850–900°C. The developed process of silicon nitride deposition made it possible to obtain reservoir capacitors with specific capacitance of 3,8–3,9 fF/μm2 at film thickness of 7,0 nm. |
|---|