Імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії
Energy storages are the most important integral elements of both autonomous energy system based on renewable energy sources and vehicles of various purposes, where they are the main power source. Therefore, the issue of controlling their operation modes is an important one, and choosing the control...
Збережено в:
| Дата: | 2022 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2022
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2022.1-3.22 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| id |
oai:tkea.com.ua:article-59 |
|---|---|
| record_format |
ojs |
| spelling |
oai:tkea.com.ua:article-592025-05-30T19:23:02Z Methods of controlling electrochemical energy storages: classification and application features Імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії Plaksin, Sergiy Zhytnyk, Mykola Levchenko, Ruslana Ostapovska, Svitlana energy storage pulsed galvanostatic method response signal material utilization ratio generalized energy index накопичувач енергії імпульсний гальваностатичний метод сигнал відгуку коефіцієнт використання матеріалів узагальнений енергетичний показник Energy storages are the most important integral elements of both autonomous energy system based on renewable energy sources and vehicles of various purposes, where they are the main power source. Therefore, the issue of controlling their operation modes is an important one, and choosing the control methods is a relevant problem.The main operation modes of energy storages which require controlling are the work mode when the stored energy is consumed and the charging mode when the used energy is replenished. The example of on-vehicle energy storage is used to analyze basic operation modes and their particular aspects. Dynamic modes with unpredictable energy consumption caused by uncontrollable undercharging and overcharging are typical.The analysis allowed drawing the conclusion that, when controlling operation modes, it is necessary to consider the energy modes of accumulators, which reflect its efficiency most fully and objectively. The analysis of existing control methods showed that their common disadvantage is that they use such parameters as voltage and operating current to control and manage the storage modes. The fact is that due to the transient nature of electrochemical processes during the operation of the storage in dynamic modes, the values of these parameters do not correspond to the current energy state of the storage.This study aims to increase the performance of electrochemical energy storages by efficiently choosing a method for controlling their operation modes. The authors prove and experimentally confirm that when working with electrochemical energy storage devices in dynamic modes, it is necessary to choose the methods based on the application of the active material utilization ratio, information equivalent of which is the value of the area under the depolarization curve on the storage’s response signal to the charging impulse. The use of the proposed mode allows combining the functions of controlling and managing the storage. Обґрунтовано та експериментально підтверджено багатофункціональність розробленого авторами одноімпульсного гальваностатичного методу, який дозволяє поєднувати функції контролю поточного стану та оперативного управління процесом зарядки накопичувача при його роботі в динамічному режимі. Критерієм контролю та управління обрано узагальнений енергетичний показник — коефіцієнт використання активних матеріалів, інформаційним еквівалентом якого є величина площі під кривою деполяризації на сигналі відгуку накопичувача після зняття зарядного імпульсу. PE "Politekhperiodika", Book and Journal Publishers 2022-06-24 Article Article Peer-reviewed Article application/pdf https://www.tkea.com.ua/index.php/journal/article/view/TKEA2022.1-3.22 10.15222/TKEA2022.1-3.22 Technology and design in electronic equipment; No. 1–3 (2022): Tekhnologiya i konstruirovanie v elektronnoi apparature; 22-30 Технологія та конструювання в електронній апаратурі; № 1–3 (2022): Технология и конструирование в электронной аппаратуре; 22-30 3083-6549 3083-6530 10.15222/TKEA2022.1-3 uk https://www.tkea.com.ua/index.php/journal/article/view/TKEA2022.1-3.22/52 Copyright (c) 2022 Plaksin S. V., Zhytnyk M. Ya., Levchenko R. Yu., Ostapovska S. Yа. http://creativecommons.org/licenses/by/4.0/ |
| institution |
Technology and design in electronic equipment |
| baseUrl_str |
|
| datestamp_date |
2025-05-30T19:23:02Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
накопичувач енергії імпульсний гальваностатичний метод сигнал відгуку коефіцієнт використання матеріалів узагальнений енергетичний показник |
| spellingShingle |
накопичувач енергії імпульсний гальваностатичний метод сигнал відгуку коефіцієнт використання матеріалів узагальнений енергетичний показник Plaksin, Sergiy Zhytnyk, Mykola Levchenko, Ruslana Ostapovska, Svitlana Імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії |
| topic_facet |
energy storage pulsed galvanostatic method response signal material utilization ratio generalized energy index накопичувач енергії імпульсний гальваностатичний метод сигнал відгуку коефіцієнт використання матеріалів узагальнений енергетичний показник |
| format |
Article |
| author |
Plaksin, Sergiy Zhytnyk, Mykola Levchenko, Ruslana Ostapovska, Svitlana |
| author_facet |
Plaksin, Sergiy Zhytnyk, Mykola Levchenko, Ruslana Ostapovska, Svitlana |
| author_sort |
Plaksin, Sergiy |
| title |
Імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії |
| title_short |
Імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії |
| title_full |
Імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії |
| title_fullStr |
Імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії |
| title_full_unstemmed |
Імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії |
| title_sort |
імпульсний метод оперативного контролю та управління зарядним процесом накопичувача енергії |
| title_alt |
Methods of controlling electrochemical energy storages: classification and application features |
| description |
Energy storages are the most important integral elements of both autonomous energy system based on renewable energy sources and vehicles of various purposes, where they are the main power source. Therefore, the issue of controlling their operation modes is an important one, and choosing the control methods is a relevant problem.The main operation modes of energy storages which require controlling are the work mode when the stored energy is consumed and the charging mode when the used energy is replenished. The example of on-vehicle energy storage is used to analyze basic operation modes and their particular aspects. Dynamic modes with unpredictable energy consumption caused by uncontrollable undercharging and overcharging are typical.The analysis allowed drawing the conclusion that, when controlling operation modes, it is necessary to consider the energy modes of accumulators, which reflect its efficiency most fully and objectively. The analysis of existing control methods showed that their common disadvantage is that they use such parameters as voltage and operating current to control and manage the storage modes. The fact is that due to the transient nature of electrochemical processes during the operation of the storage in dynamic modes, the values of these parameters do not correspond to the current energy state of the storage.This study aims to increase the performance of electrochemical energy storages by efficiently choosing a method for controlling their operation modes. The authors prove and experimentally confirm that when working with electrochemical energy storage devices in dynamic modes, it is necessary to choose the methods based on the application of the active material utilization ratio, information equivalent of which is the value of the area under the depolarization curve on the storage’s response signal to the charging impulse. The use of the proposed mode allows combining the functions of controlling and managing the storage. |
| publisher |
PE "Politekhperiodika", Book and Journal Publishers |
| publishDate |
2022 |
| url |
https://www.tkea.com.ua/index.php/journal/article/view/TKEA2022.1-3.22 |
| work_keys_str_mv |
AT plaksinsergiy methodsofcontrollingelectrochemicalenergystoragesclassificationandapplicationfeatures AT zhytnykmykola methodsofcontrollingelectrochemicalenergystoragesclassificationandapplicationfeatures AT levchenkoruslana methodsofcontrollingelectrochemicalenergystoragesclassificationandapplicationfeatures AT ostapovskasvitlana methodsofcontrollingelectrochemicalenergystoragesclassificationandapplicationfeatures AT plaksinsergiy ímpulʹsnijmetodoperativnogokontrolûtaupravlínnâzarâdnimprocesomnakopičuvačaenergíí AT zhytnykmykola ímpulʹsnijmetodoperativnogokontrolûtaupravlínnâzarâdnimprocesomnakopičuvačaenergíí AT levchenkoruslana ímpulʹsnijmetodoperativnogokontrolûtaupravlínnâzarâdnimprocesomnakopičuvačaenergíí AT ostapovskasvitlana ímpulʹsnijmetodoperativnogokontrolûtaupravlínnâzarâdnimprocesomnakopičuvačaenergíí |
| first_indexed |
2025-09-24T17:30:19Z |
| last_indexed |
2025-09-24T17:30:19Z |
| _version_ |
1850410204152201216 |