Оптимизация конструкции мембранных датчиков
The possibility of reducing the power consumed by the gas concentration sensor through the introduction of cracks in the structure of the multi-layered membrane has been considered. The conduction of etching of the peaks of pores in concentrated orthophosphoric acid for increasing of the effected ar...
Збережено в:
| Дата: | 2009 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2009
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2009.5.16 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| Резюме: | The possibility of reducing the power consumed by the gas concentration sensor through the introduction of cracks in the structure of the multi-layered membrane has been considered. The conduction of etching of the peaks of pores in concentrated orthophosphoric acid for increasing of the effected area of contact of platinum with sub layer of porous aluminium has been suggested. |
|---|