Строение и высокотемпературная сверхпроводимость пленок Bi₂Sr₂CaCu₂Oᵧ
Bi–Sr–Ca–Cu–O films exhibiting high-temperature superconductivity were fabricated on MgO{100}, LaAlO₃{100}, Al₂O₃, and Ag substrates using stencil printing and RF magnetron sputtering followed by thermal treatment near the melting temperature. The influence of fabrication parameters on the structure...
Збережено в:
| Дата: | 2007 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2007
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2007.4.48 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| Резюме: | Bi–Sr–Ca–Cu–O films exhibiting high-temperature superconductivity were fabricated on MgO{100}, LaAlO₃{100}, Al₂O₃, and Ag substrates using stencil printing and RF magnetron sputtering followed by thermal treatment near the melting temperature. The influence of fabrication parameters on the structure, composition, and superconducting properties of the films was investigated. The functionality of the obtained films at low temperatures and ultrahigh frequencies was demonstrated using fabricated microstrip resonators. |
|---|