Ультразвуковой пьезокерамический преобразователь
An ultrasonic acoustic transducer is proposed for generating acoustic pulses in measuring instruments. It consists of two piezoelectric plates, 1.8 cm in diameter, bonded together with opposite polarity. The bimorph plate bends alternately in opposite directions with an amplitude much greater than t...
Збережено в:
| Дата: | 2006 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2006
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2006.4.28 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| Резюме: | An ultrasonic acoustic transducer is proposed for generating acoustic pulses in measuring instruments. It consists of two piezoelectric plates, 1.8 cm in diameter, bonded together with opposite polarity. The bimorph plate bends alternately in opposite directions with an amplitude much greater than that of a single plate, thereby producing acoustic oscillations of significant amplitude in air. The piezoceramic transducer operates at a frequency of 25 kHz, which ensures relatively low signal attenuation during surface probing. At a distance of 20 m, the measurement error is approximately 44 mm. |
|---|