Нанокомпозиційні покриття для захисту від зношування в умовах високих температур
The investigation results of friction and wear of the developed detonation composite coatings FeAl2-Ti-Si-B under high-temperature friction conditions are presented. The choice of FeAl2-Ti-Si-B composition and its optimal content for spraying wear-resistant coatings loaded with friction under high-t...
Saved in:
| Date: | 2024 |
|---|---|
| Main Authors: | Shchepetov, Vitalii, Kharchenko, Sergii, Kharchenko, Olena, Dolzhenko, Gennadii |
| Format: | Article |
| Language: | English |
| Published: |
General Energy Institute of the National Academy of Sciences of Ukraine
2024
|
| Subjects: | |
| Online Access: | https://systemre.org/index.php/journal/article/view/826 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | System Research in Energy |
Institution
System Research in EnergySimilar Items
Coatings properties Cr-Si-B-MgC2 in high conditions temperatures
by: Shchepetov , Vitalii, et al.
Published: (2022)
by: Shchepetov , Vitalii, et al.
Published: (2022)
Formation of nanogetherogenic materials with increased characteristics of heat resistance
by: Shchepetov , Vitalii, et al.
Published: (2022)
by: Shchepetov , Vitalii, et al.
Published: (2022)
Nanocomposite Coatings for Wear Protection at High Temperatures
by: Shchepetov, Vitalii, et al.
Published: (2024)
by: Shchepetov, Vitalii, et al.
Published: (2024)
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
by: Yatsenko V.P., et al.
Published: (2009)
by: Yatsenko V.P., et al.
Published: (2009)
Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
by: Shraiber O.A., et al.
Published: (2008)
by: Shraiber O.A., et al.
Published: (2008)
Властивості покриттів Cr–Si–B–MgC2 в умовах підвищенних температур
by: Shchepetov , Vitalii, et al.
Published: (2022)
by: Shchepetov , Vitalii, et al.
Published: (2022)
A source for generating seismic waves in geophysical prospecting
by: Polyakovskiy, V.O, et al.
Published: (2025)
by: Polyakovskiy, V.O, et al.
Published: (2025)
Електрорезистивні властивості графіту за високих тисків та високих температур
by: Савіцький, О.В., et al.
Published: (2019)
by: Савіцький, О.В., et al.
Published: (2019)
Нанокомпозиційні епоксиполіуретанові матеріали, що наповнені фулеритом
by: Рожнова, Р.А., et al.
Published: (2015)
by: Рожнова, Р.А., et al.
Published: (2015)
ЕЛЕКТРОРЕЗИСТИВНІ ВЛАСТИВОСТІ ГРАФІТУ ПІД ДІЄЮ ВИСОКИХ ТИСКІВ ТА ВИСОКИХ ТЕМПЕРАТУР
by: Савіцький, О. В., et al.
Published: (2019)
by: Савіцький, О. В., et al.
Published: (2019)
Creation of energy efficient "green constructions" in conditions of moderately continental climate
by: Tkachenko, T.M.
Published: (2018)
by: Tkachenko, T.M.
Published: (2018)
Особливості зношування цирконію у газових середовищах за різних температур
by: Арендар, Л.А., et al.
Published: (2012)
by: Арендар, Л.А., et al.
Published: (2012)
Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
by: Лебедев, Владимир, et al.
Published: (2014)
by: Лебедев, Владимир, et al.
Published: (2014)
Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
by: Лебедев, Владимир, et al.
Published: (2014)
by: Лебедев, Владимир, et al.
Published: (2014)
Nanocomposite coatings for wear protection at high temperatures
by: V. Shchepetov, et al.
Published: (2024)
by: V. Shchepetov, et al.
Published: (2024)
On the prediction of erosive wear of the heat-transfer surfaces of boiler equipment
by: Yatsenko V.P.
Published: (2006)
by: Yatsenko V.P.
Published: (2006)
Зміцнення спрямовано армованих композитів в умовах високих температур
by: Лобода, П.І., et al.
Published: (2010)
by: Лобода, П.І., et al.
Published: (2010)
Application of the multilayer soil equivalence method in determining the normalized parameters of the grounding system
by: Koliushko, D. G., et al.
Published: (2025)
by: Koliushko, D. G., et al.
Published: (2025)
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
by: Tran, C. D., et al.
Published: (2025)
by: Tran, C. D., et al.
Published: (2025)
ЖАРОСТІЙКІ ПОКРИТТЯ ТА ПЕРСПЕКТИВИ ЇХ ВИКОРИСТАННЯ ДЛЯ ПОДОВЖЕННЯ РЕСУРСУ ЕНЕРГЕТИЧНОГО ОБЛАДНАННЯ (ОГЛЯД)
by: Kharchenko, S., et al.
Published: (2021)
by: Kharchenko, S., et al.
Published: (2021)
EXPERIMENTAL SUBSTANTIATION OF THE CALCULATION PROCEDURE OF NORMALIZED PARAMETERS OF GROUNDING DEVICE BASED ON THE THREE-LAYER SOIL MODEL
by: Koliushko, D. G., et al.
Published: (2018)
by: Koliushko, D. G., et al.
Published: (2018)
До теорії термомеханічних процесів в аморфних діелектриках за високих температур
by: Чекурін, В., et al.
Published: (2005)
by: Чекурін, В., et al.
Published: (2005)
Study of functioning of heat exchanger in soils with different thermal diffusivity
by: Kovyazin, О. S.
Published: (2018)
by: Kovyazin, О. S.
Published: (2018)
TWO-LAYER MICROSTRIP ANTENNA ARRAYS OF RECTANGULAR RADIATORS
by: Seleznyov, D. G., et al.
Published: (2018)
by: Seleznyov, D. G., et al.
Published: (2018)
PROPERTIES OF THE SURFACE WAVE IN THE PLANAR GROUNDED DIELECTRIC STRUCTURE EXCITED BY A TWO-LAYER MICROSTRIP GRATING
by: Seleznyov, D. G., et al.
Published: (2018)
by: Seleznyov, D. G., et al.
Published: (2018)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
by: Fridman, Mark M.
Published: (2018)
by: Fridman, Mark M.
Published: (2018)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
by: Фридман, М. М.
Published: (2017)
by: Фридман, М. М.
Published: (2017)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
by: Fridman, Mark M.
Published: (2018)
by: Fridman, Mark M.
Published: (2018)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
by: Фридман, М. М.
Published: (2017)
by: Фридман, М. М.
Published: (2017)
Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture
by: Костик, Катерина
Published: (2014)
by: Костик, Катерина
Published: (2014)
Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture
by: Костик, Катерина
Published: (2014)
by: Костик, Катерина
Published: (2014)
Method of building a mathematical model of layered flows
by: Cherniy, Dmytro I.
Published: (2020)
by: Cherniy, Dmytro I.
Published: (2020)
Формування наногетерогенних матеріалів з підвищеними показниками жаростійкості
by: Shchepetov , Vitalii, et al.
Published: (2022)
by: Shchepetov , Vitalii, et al.
Published: (2022)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
by: Velizade, Evren S.
Published: (2020)
by: Velizade, Evren S.
Published: (2020)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
by: Velizade, Evren S.
Published: (2020)
by: Velizade, Evren S.
Published: (2020)
Assessing the economic and environmental benefits of blue-green infrastructure to increase urban resilience to climate change
by: Kravchenko, Maryna, et al.
Published: (2025)
by: Kravchenko, Maryna, et al.
Published: (2025)
Розрахункова модель поширення тріщин у біметалевих матеріалах за високих концентрацій та температур водню
by: Андрейків, О.Є., et al.
Published: (2015)
by: Андрейків, О.Є., et al.
Published: (2015)
Розробка хімічного складу і режимів термічної обробки сталі для залізничних коліс з підвищеною стійкістю до зношування при високих навантаженнях на вісь
by: Бабаченко, О.І., et al.
Published: (2024)
by: Бабаченко, О.І., et al.
Published: (2024)
Модифікування поліетерсульфонових мембран наночастинками TiO2 методом «layer-by-layer»
by: Kolesnyk, I. S., et al.
Published: (2017)
by: Kolesnyk, I. S., et al.
Published: (2017)
Поліуретанові функціональні покриття для захисту різного типу поверхонь від дії агресивних факторів довкілля
by: Савельєв, Ю.В., et al.
Published: (2014)
by: Савельєв, Ю.В., et al.
Published: (2014)
Similar Items
-
Coatings properties Cr-Si-B-MgC2 in high conditions temperatures
by: Shchepetov , Vitalii, et al.
Published: (2022) -
Formation of nanogetherogenic materials with increased characteristics of heat resistance
by: Shchepetov , Vitalii, et al.
Published: (2022) -
Nanocomposite Coatings for Wear Protection at High Temperatures
by: Shchepetov, Vitalii, et al.
Published: (2024) -
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
by: Yatsenko V.P., et al.
Published: (2009) -
Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
by: Shraiber O.A., et al.
Published: (2008)