Cover Image

The effect of tin fillers on structure and technological properties of brazing alloys of Ag-Cu-Zn system

Saved in:

Bibliographic Details
Date:	2010
Main Authors:	V. F. Khorunov, S. V. Maksimova, B. V. Stefaniv
Format:	Article
Language:	English
Published:	2010
Series:	Automatic Welding
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000465600
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Effect of palladium on structure and technological properties of Ag–Cu–Zn–Ni–Mn system brazing filler metals
by: V. F. Khorunov, et al.
Published: (2012)

Effect of nickel and manganese on structure of alloys of Ag–Cu–Zn–Sn system and strength of brazed joints
by: V. F. Khorunov, et al.
Published: (2014)

New system of filler metals for brazing of titanium alloys
by: V. F. Khorunov, et al.
Published: (2012)

Structural state of quick- hardened brazing alloy Cu–Ti
by: S. V. Maksimova, et al.
Published: (2010)

Effect of gap value and initial state of brazing alloy of structure formation of titanium alloy brazed joints
by: S. V. Maksimova, et al.
Published: (2013)

Brazing filler metal without boron and silicon for brazing of heat-resistant nickel alloy
by: S. V. Maksimova, et al.
Published: (2017)

Brazing and metallization of perovskite PNZT-ceramics using Ag—Cu—O filler in the air
by: T. V. Sidorenko
Published: (2015)

Brazing of titanium alloys using brazing alloys based on aluminium
by: V. F. Khorunov, et al.
Published: (2012)

Brazing alloys of Ti–Zr–(Fe, Mn, Co) system for brazing of titanium alloys
by: V. F. Khorunov, et al.
Published: (2013)

Mechanical properties of brazed joints of dispersion-strengthened copper alloy
by: S. V. Maksimova, et al.
Published: (2010)

Fluxless brazing of aluminium alloys by brazing filler metal of Al-Ge system
by: O. M. Sabadash, et al.
Published: (2023)

Strength of heat-resistant nickel alloy Inconel 718 brazed joints, produced using palladium brazing alloys
by: V. F. Khorunov, et al.
Published: (2010)

Structure of joints of heat-resistant nickel alloy Inconel 718, made by high-temperature vacuum brazing
by: S. V. Maksimova, et al.
Published: (2010)

Effect of depressants and base metal on microstructure of brazed seams in joints of Ni3Al-based alloys with Inconel 718 alloy
by: S. V. Maksimova, et al.
Published: (2015)

Features of solidification of complex- alloyed filler metals for brazing hightemperature nickel alloys
by: V. V. Kurenkova, et al.
Published: (2009)

Possibility of reduction in growth of intermetallic interlayer during brazing of steel using brazing alloys copper-phosphorus
by: A. A. Pisarev, et al.
Published: (2016)

Brazing of titanium aluminide by rapidly-hardened strips
by: S. V. Maksimova, et al.
Published: (2010)

Development of technology of brazing of diamond-hardalloy cutters
by: B. F. Stefaniv
Published: (2013)

Arc brazing of low-carbon steels
by: V. F. Khorunov, et al.
Published: (2013)

Effect of structure of joint zone of diamond layer with hard-alloy substrate of brazed cutters on their service life
by: B. V. Stefaniv, et al.
Published: (2018)

Development of technology of titanium alloy brazing using brazing alloys on Al-Mg system base
by: V. V. Voronov
Published: (2013)

Effect of the doping method on luminescent properties of ZnS:Ag
by: Yu. Yu. Bacherikov, et al.
Published: (2019)

Effect of the doping method on luminescent properties of ZnS:Ag
by: Bacherikov, Yu.Yu., et al.
Published: (2019)

Wetting of tin dioxid ceramics by Ag—Cu—O melts on the air
by: Ju. V. Najdich, et al.
Published: (2015)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
by: B. V. Stefaniv
Published: (2013)

Microstructure of brazed joints of nickel aluminides
by: S. V. Maksimova, et al.
Published: (2014)

Formation of brazed joints of titanium aluminide
by: S. V. Maksimova
Published: (2009)

Scandium effect on the properties and structure of alloys of Al-Zn-Mg-Cu system and their welded joints
by: V. E. Fedorchuk, et al.
Published: (2019)

Development of brazing alloy, brazing technologies and correction of castings surface defects of heat-resistant nickel alloys for ship gas turbines
by: V. V. Kvasnytskyi, et al.
Published: (2021)

Producing nitinol brazed joints (Review)
by: S. V. Maksymova, et al.
Published: (2022)

About the possibility of brazing of niobium to alumina VK94-1 ceramics by copper and copper-nickel brazing fillers without applying pressure
by: V. S. Zhuravlev
Published: (2015)

Brazing of alumina ceramic and graphite to titanium by amorphous foil Ti-20Zr–20Cu–20Ni. As the filler metal
by: Shapiro, A.E.
Published: (2015)

Brazing of alumina ceramic and graphite to titanium by amorphous foil Ti-20Zr–20Cu–20Ni. As the filler metal
by: A. E. Shapiro
Published: (2015)

Brazing of ZrO2-ceramic to metal by silver—copper—oxygen filler on the air
by: A. V. Durov
Published: (2014)

Biocidal activity of the precipitated silica with surface compounds of Ag, Cu and Zn
by: V. M. Bogatyrov, et al.
Published: (2015)

Biocidal activity of the precipitated silica with surface compounds of Ag, Cu and Zn
by: Bogatyrov, V.M., et al.
Published: (2015)

The influence of technological factors on the properties of high-strength aluminum alloy of the Al-Zn-Mg-Cu system
by: A. M. Verkhovliuk, et al.
Published: (2020)

Peculiarities of melting, structure and properties of nickel alloys of Ni–Mn–Cu system
by: V. F. Khorunov, et al.
Published: (2014)

Effect of annealing mode on ZnS-Cu,CI properties
by: Bacherikov, Yu.Yu., et al.
Published: (2004)

Some aspects of technology of high-temperature flux-free brazing of aluminium alloys
by: E. I. Storchaj, et al.
Published: (2009)