Buchumschlag

The influence of hydrogen on phase composition and physicomechanical properties of structural materials

Gespeichert in:

Bibliographische Detailangaben
Datum:	2010
1. Verfasser:	V. V. Fedorov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2010
Schriftenreihe:	Materials Science (Physicochemical mechanics of materials)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000657056
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Investigation of the influence of microdispersed fillers on physicomechanical and thermal properties of epoxy composites
von: A. V. Buketov, et al.
Veröffentlicht: (2015)

The influence of polyvinylpyrrolidone molecular weight on the physicomechanical properties of composite polyamide hydrogel membranes
von: O. V. Suberliak, et al.
Veröffentlicht: (2019)

Optimization of physicomechanical properties of anode material for fuel cells
von: B. D. Vasyliv, et al.
Veröffentlicht: (2015)

The influence of mechanism and parameters of hardening of modified new laquer phenolformaldehyde resins on composite physicomechanical properties
von: O. V. Suberliak, et al.
Veröffentlicht: (2010)

Physicomechanical properties of Cu–Al2O3 galvanic compositions.
von: M. D. Sakhnenko, et al.
Veröffentlicht: (2014)

Effect of localplastic deformations on physicomechanical properties of material and the pipeline stress state
von: Ye. V. Kharchenko, et al.
Veröffentlicht: (2013)

Structure and physicomechanical properties of AISI 321 steel welded joints
von: L. I. Markashova, et al.
Veröffentlicht: (2016)

Structure and physicomechanical properties of as-cast Ti–Nb–Mo titanium alloys
von: O. M. Myslyvchenko, et al.
Veröffentlicht: (2020)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
von: V. A. Mechnyk, et al.
Veröffentlicht: (2020)

The influence of composition and structure of binder phase on hard alloys service properties
von: V. S. Panov
Veröffentlicht: (2019)

The influence of the prerecrystallization treatment on physicomechanical properties of the plastically deformed metals and alloys and the spray coatings
von: O. M. Dubovyi, et al.
Veröffentlicht: (2010)

Physicomechanical properties of electric arc sprayed coating formed in supersonic mode
von: V. M. Hvozdetskyi, et al.
Veröffentlicht: (2024)

Influence of heat treatment on morphology and phase composition of TEG-Co composite material
von: Matzui, L., et al.
Veröffentlicht: (2004)

Influence of liquid glass composition and properties on the strength of low-hydrogen electrode coatings
von: A. E. Marchenko, et al.
Veröffentlicht: (2018)

The influence of VC-Al additive content on structure and phase composition of cBN based superhard materials
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)

Physicomechanical and corrosion-resistant properties of inhibited fast-hardening bitumen-latex emulsions
von: V. A. Chervatiuk, et al.
Veröffentlicht: (2015)

Influence of mechanical activation of polytetrafluoroethylene matrix of tribotechnical composites on its structural and phase transformations and properties
von: Budnik, O.A., et al.
Veröffentlicht: (2015)

Specific electric resistance as an informative parameter for determination of the actual physicomechanical characteristics of materials of metal structures in long-term operation
von: O. M. Karpash, et al.
Veröffentlicht: (2009)

Physicomechanical parameters under cutting of deposited surfaces
von: V. V. Kolomiiets, et al.
Veröffentlicht: (2021)

Phase composition and thermoelectric properties of materials in Pb-Ag-Te system
von: M. O. Haluschak, et al.
Veröffentlicht: (2016)

Development of epoxy-polyester matrix with improved adhesion and physicomechanical properties using an isocyanate modificator
von: A. V. Buketov, et al.
Veröffentlicht: (2019)

Titanium coating on the carbon steel: direct-current and pulse electrodeposition, physicomechanical and chemical properties
von: V. V. Malyshev, et al.
Veröffentlicht: (2014)

The influence of irradiation by hydrogen plasma on the structure and phase compozition Ti-Zr-Ni alloys containing quasicrystalline phase
von: Bazdyreva, S.V., et al.
Veröffentlicht: (2012)

The influence of the reducing and oxidizing environments on physicomechanical properties of ScCeSZ–NiO and YSZ–NiO ceramics
von: B. D. Vasyliv, et al.
Veröffentlicht: (2013)

Phase transitions and dynamical properties of quasi-one-dimensional structures with hydrogen bonds
von: Stetsiv, R.Ya.
Veröffentlicht: (2012)

The impact of hydrogen-free ion nitriding on physicomechanical and performance characteristics of hard alloys T5K10 and T15K6
von: P. V. Kaplun, et al.
Veröffentlicht: (2018)

The influence of the durable interactionof SmCo5-based alloy with low-pressure hydrogen on the phase composition
von: I. I. Bulyk, et al.
Veröffentlicht: (2012)

Investigation of magnetization of products of a non-uniform section for magnetic inspection of physicomechanical properties
von: S. G. Sandomirskij
Veröffentlicht: (2009)

The influence of structure peculiarities of casing steels on their mechanical properties and hydrogen brittleness
von: O. I. Zvirko, et al.
Veröffentlicht: (2020)

Influence of the substrate potential upon deposition and the size factor on the structure, stress state, and physicomechanical characteristics of multilayer TiN/Ti coatings
von: O. V. Sobol, et al.
Veröffentlicht: (2011)

Study the influence of model biological medium on structure and properties of epoxy-polyurethane composite materials, filled by ferrocene
von: T. V. Rudenchyk, et al.
Veröffentlicht: (2014)

Influence of the model environment on the structure and properties of composite materials with doxorubicin based on polyurethanes with isocyanurate fragments
von: H. A. Kozlova, et al.
Veröffentlicht: (2021)

Dispersed and laminar volumetric nanocrystal materials.on base of copper and molybdenum. Structure, properties, technology, application. Information 1. Structure and phase composition
von: N. I. Grechanjuk, et al.
Veröffentlicht: (2018)

The influence of the reducing environment on the structure and physicomechanical properties of ceramics of the ZrO2–Y2O3–Al2O3–NiO–CuO
von: Ya. Podhurska, et al.
Veröffentlicht: (2020)

Influence of a phase composition cast high-entropy alloys on mechanical properties
von: S. A. Firstov, et al.
Veröffentlicht: (2011)

Dependence of electrical properties of composition material from the structure of the matrix
von: K. V. Kyrylenko
Veröffentlicht: (2019)

Hydrogen-diffusion mechanical treatment of structural materials
von: Ya. M. Hladkyi, et al.
Veröffentlicht: (2019)

The influence of milling conditions in hydrogen on phase composition and anisotropy of SmCo4.8Zr0.2 alloy
von: I. I. Bulyk, et al.
Veröffentlicht: (2015)

Influence of composition and structure on mechanical properties of hypereutectoid graphitic steels
von: I. M. Andreiko, et al.
Veröffentlicht: (2016)

THE INFLUENCE OF THE PHASE COMPOSITION OF MIXED-PHASE MESOPOROUS TiO2 ON ITS PHOTOCATALYTIC ACTIVITY IN THE REACTION OF HYDROGEN EVOLUTION FROM AN AQUEOUS-ETHANOL MIXTURE
von: Ermokhina, Natalia, et al.
Veröffentlicht: (2024)