Buchumschlag

Pressure with friction of an absolutely rigid punch on an elastic half-space with cracks

Gespeichert in:

Bibliographische Detailangaben
Datum:	2010
Hauptverfasser:	M. P. Savruk, A. Tomchyk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2010
Schriftenreihe:	Materials Science (Physicochemical mechanics of materials)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000657117
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

On interaction of elastic SH-wave with interface crack in absolutely rigid joint of plate and half-space
von: Z. T. Nazarchuk, et al.
Veröffentlicht: (2012)

A contact problem on a rigid punch and an elastic half-space as the inverse one
von: N. I. Obodan, et al.
Veröffentlicht: (2017)

Partial Slip in Thermomechanical Contact of Plane Punch and Elastic Half-Space
von: Yu. M. Streliaev, et al.
Veröffentlicht: (2024)

Local friction wear of elastic half-space with a protrusion
von: O. P. Kozachok
Veröffentlicht: (2021)

Contact interaction of prestressed annular punch and half-space
von: Yu. Babych, et al.
Veröffentlicht: (2020)

Contact of rectangular punch with rounded edges with a half-space
von: N. N. Tkachuk, et al.
Veröffentlicht: (2014)

Contact of rectangular punch with rounded edges with a half-space
von: Ткачук, Н. Н., et al.
Veröffentlicht: (2014)

Contact of rectangular punch with rounded edges with a half-space
von: Ткачук, Н. Н., et al.
Veröffentlicht: (2014)

Slipping contact of a punch with an elastic wedge
von: V. I. Ostryk, et al.
Veröffentlicht: (2011)

Contact problem on wear by punches of canonical shape of elastic half-plane with the Winkler&#039;s coating
von: Yu. V. Sachuk, et al.
Veröffentlicht: (2015)

Numerical simulation of the stress-strain and limit states of the pyrophyllite container and punches of a six-punch high pressure apparatus
von: O. V. Bovsunivskyi, et al.
Veröffentlicht: (2020)

Modeling of Impact of Rigid Bodies with Allowance for Friction
von: A. G. Zabuga
Veröffentlicht: (2016)

Partially opened semi-infinite crack at the edge of an elastic strip and rigid wall
von: V. I. Ostryk
Veröffentlicht: (2020)

Diffraction of an elastic SH-wave at the interface crack in a rigid junction of the layer and an interface
von: Z. T. Nazarchuk, et al.
Veröffentlicht: (2011)

Plane thermoelastic deformation of elastically of multilayer plate linked with rigid half-plane
von: N. M. Antonenko
Veröffentlicht: (2017)

Stress concentration near the openings and punch in anisotropic half-plane
von: O. V. Maksymovych, et al.
Veröffentlicht: (2016)

An elastic problem for a space with inclusions of arbitrary rigidity under shear
von: M. M. Stadnyk
Veröffentlicht: (2010)

A closed semi-infinite crack at the boundary of an elastic strip and a rigid wall
von: V. I. Ostryk
Veröffentlicht: (2017)

Smooth contact of the semi-infinite punch with rounded edge and an elastic strip
von: T. V. Klimchuk, et al.
Veröffentlicht: (2016)

Interaction of punches of canonical shapes with an elastic base with two bedding coefficients
von: O. V. Maksymuk, et al.
Veröffentlicht: (2021)

The contact between an elastic half-space and a rigid base under the action of heat sinks distributed along a circle
von: M. Mykytyn
Veröffentlicht: (2015)

Two-layered periodic coated elastic half-space under Hertz&#039;s pressure
von: R. D. Kulchytskyi-Zhyhailo
Veröffentlicht: (2011)

Plane problem of the theory of elasticity for a quasi-orthotropic body with cracks
von: M. P. Savruk, et al.
Veröffentlicht: (2015)

Fracture of half-space compressed along the near-surface penny-shaped crack in composite and elastic materials
von: M. V. Dovzhyk, et al.
Veröffentlicht: (2016)

Determination of resonance frequencies during impedance defect probing by elastic SH-wave on the interface of a rigid joint of the layer and half-space
von: M. V. Voitko
Veröffentlicht: (2013)

Using the differential method for determining quasi-hydrostatic pressures in the cells of six-punch presses
von: A. V. Burchenia, et al.
Veröffentlicht: (2021)

Calculation of stress concentration near punches, holes and cracks in a half-plane based on the integral equation method and Green&#039;s solutions
von: O. V. Maksymovych, et al.
Veröffentlicht: (2019)

The influence of geometrical parameters of punches of cubic high-pressure apparatus on their stress-strain and limiting state at high pressure creation
von: S. B. Polotniak, et al.
Veröffentlicht: (2017)

Equilibrium of the elastic half-plane with rigidly fixed boundary, which is weakened by a slanted cut
von: A. V. Loveikin
Veröffentlicht: (2019)

Contact Problem for Rigid Annular Stamp and Half-Space with Initial (Residual) Stresses
von: N. A. Jaretskaja
Veröffentlicht: (2018)

Plane periodic problem of elasticity theory for an isotropic plane with curvilinear holes and edge cracks
von: V. S. Kravets, et al.
Veröffentlicht: (2018)

Elastic suspension of a given rigidity
von: I. V. Balabanov, et al.
Veröffentlicht: (2014)

Finite absolute continuity on an abstract Wiener space
von: G. V. Riabov
Veröffentlicht: (2011)

Pressure of an elastic body on a rigid base with a groove, partly filled with liquid not wetting its surface
von: B. S. Slobodian
Veröffentlicht: (2011)

Mathematical modeling of interrelation between conveyer belt and rigid drum with no friction considered
von: H. I. Larionov, et al.
Veröffentlicht: (2019)

Nonstationary loading at the elastic half-space surface
von: V. D. Kubenko
Veröffentlicht: (2014)

On solution of the first and second boundary problems dynamic elasticity theory of steady oscillations of half-space with elliptical cracks by biem
von: V. Stankevych
Veröffentlicht: (2016)

Solution of a contact problem for the prestressed layer and two coaxial elastic punches with initial (residual) stresses
von: D. M. Maksymchuk
Veröffentlicht: (2015)

Axisymmetric torsion problem for elastic space with smooth and acute-angled cuts
von: V. S. Kravets, et al.
Veröffentlicht: (2013)

Modeling of temperature fields in the growth volume of the high-pressure cell of the cix-punches high pressure apparatus in growing of diamond crystals by T-gradient method
von: T. S. Panasiuk, et al.
Veröffentlicht: (2017)