Buchumschlag

Evaluation of hydrogen concentration in the process zone at the crack tip

Gespeichert in:

Bibliographische Detailangaben
Datum:	2010
Hauptverfasser:	Ya. L. Ivanytskyi, O. V. Hembara, O. D. Smiian, M. Kovalik
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2010
Schriftenreihe:	Materials Science (Physicochemical mechanics of materials)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000657407
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of the process zone at the tip of an interfacial crack on the condition of its advancement
von: A. A. Kaminskij, et al.
Veröffentlicht: (2014)

Progress of Plastic Zone Near a Tip of Crack with Contacting Faces
von: A. O. Kaminsky, et al.
Veröffentlicht: (2024)

Study of the size of plastic zones at the crack tips in orthotropic shell with accounting material hardening
von: K. M. Dovbnia, et al.
Veröffentlicht: (2012)

On the evolution of the prefracture zone near the crack tip in a nonlinear anisotropic body
von: A. A. Kaminskij, et al.
Veröffentlicht: (2018)

The influence of the stress-strain state on distribution of hydrogen concentration in the prefracture region.
von: V. V. Panasiuk, et al.
Veröffentlicht: (2014)

Effect of the side prefracture zone near the tip of interfacial crack on the contact of its faces
von: M. V. Dudyk
Veröffentlicht: (2015)

A method for determination of the crack growth resistance characteristics of elastoplastic materials
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2012)

Pre-Fracture Zone Near Mode I Crack Tip in Nonlinearly Elastic Orthotropic Material
von: A. A. Kaminskij, et al.
Veröffentlicht: (2019)

The investigation of prefracture zone at the tip of interfacial crack in an elastic body under shear within the framework of the complex model
von: A. O. Kaminskyi, et al.
Veröffentlicht: (2014)

Cohesive model of a prefracture zone near the tip of the crack outcoming from the corner point of the broken interface
von: A. O. Kaminskyi, et al.
Veröffentlicht: (2019)

Evaluation of stress field reconstruction errors near the crack tip of body under plain strain conditions
von: O. V. Lychak, et al.
Veröffentlicht: (2014)

Evaluation of hydrogen influence on mechanical properties of 40X steel
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2014)

Evaluation of stresses caused by the concentration of hydrogen in metals
von: M. H. Stashchuk, et al.
Veröffentlicht: (2015)

Biaxial tension of a piece-wise homogeneous plate with two cracks at the materials interface with account of plastic zones at their tips
von: M. M. Nykolyshyn, et al.
Veröffentlicht: (2014)

About the cohesive pre-fracture zone at the tip of a crack outcoming from the corner point of the broken interface of materials
von: A. O. Kaminskyi, et al.
Veröffentlicht: (2020)

The influence of hydrogen on the creep-fatigue crack initiation in plates near stress concentrators
von: Ye. Andreikiv, et al.
Veröffentlicht: (2014)

Modelling of the structural elements deformation under conditions of creep, stress corrosion cracking and hydrogenation
von: O. V. Hembara, et al.
Veröffentlicht: (2021)

Prediction of crack propagation kinetics and durability of vessels in gaseous hydrogen
von: O. V. Hembara, et al.
Veröffentlicht: (2012)

A mathematical model for determination of the hydrogen concentration, that changes the mechanism of deformation
von: Ye. Andreikiv, et al.
Veröffentlicht: (2019)

On the influence of strain hardening on the length of a plastic zone near a crack tip in a transversely isotropic material
von: V. N. Bastun
Veröffentlicht: (2015)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: M. A. Chugaj
Veröffentlicht: (2014)

The strip dielectric breakdown model at the crack tip in a piezoelectric material
von: V. B. Govorukha
Veröffentlicht: (2010)

Plastic zones development at fractures threshold at tip of square notch
von: V. Kryven, et al.
Veröffentlicht: (2015)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)

The strip dielectric breakdown model at the crack tip in a piezoelectric material
von: Говоруха, В. Б.
Veröffentlicht: (2017)

The strip dielectric breakdown model at the crack tip in a piezoelectric material
von: Говоруха, В. Б.
Veröffentlicht: (2017)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)

Application of energy approach to the evaluation of serviceability of a steam boiler drum under thermal cycling and hydrogenation
von: O. V. Hembara, et al.
Veröffentlicht: (2017)

The influence of errors in stress evaluation in the crack tip vicinity on the accuracy of estimation of Williams series coefficient under transversal shear
von: I. S. Holynskyi
Veröffentlicht: (2012)

Plane Problem on Forming of a Neck in Neighborhood of Crack Tip in a Plate
von: L. P. Khoroshun
Veröffentlicht: (2015)

The compatible action of bending with the tension of an isotropic plate containing a crack without contact of their tips and with taking into account plastic zones and material strengthening
von: V. K. Opanasovych, et al.
Veröffentlicht: (2018)

Theoretical-experimental approach to estimation of fatigue crack growth in hydrogenated materials
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2010)

Evaluation of redistribution of hydrogen near a crack-like defect
von: M. H. Stashchuk
Veröffentlicht: (2016)

Biaxial bending isotropic plate with a through-thickness rectilinear crack with accounting the width of a contact zone of its faces and in the presence of plastic zones near its tips
von: V. K. Opanasovych, et al.
Veröffentlicht: (2015)

Bending isotropic plate with two equal coaxial through-thickness cracks with accounting the width of a contact zone of its faces and in the presence of plastic zones near its tips
von: V. K. Opanasovych, et al.
Veröffentlicht: (2016)

Computational model of crack propagation in bi-metal materials under high concentrations and temperatures of hydrogen
von: Ye. Andreikiv, et al.
Veröffentlicht: (2015)

On the stress intensity near the tips of interfacial boundary shear cracks at a corner point of the interface
von: V. M. Nazarenko, et al.
Veröffentlicht: (2015)

Evaluation of crack growth resistance characteristics in unidirectional glass-plastics
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2012)

Combined bending and tension of the plate with a rectilinear through-crack in the presence of plastic zones in its tips with regard for the contact of its edges and linear strengthening of the material
von: S. O. Alfavitska, et al.
Veröffentlicht: (2017)

The influence of local stresses and deformations at the crack tip on the mechanisms of Hardox-400 steel fracture
von: I. R. Dzioba, et al.
Veröffentlicht: (2019)