Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	S. I. Semykin, T. S. Golub, S. A. Dudchenko
Format:	Artikel
Sprache:	English
Veröffentlicht:	2020
Schriftenreihe:	Science and innovation
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001091367
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: Semykin, S.I., et al.
Veröffentlicht: (2020)

Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
von: S. I. Semykin, et al.
Veröffentlicht: (2021)

Improving the efficiency of converter bath top-blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

Investigation on physical model of converter process of features of electric potential influence on nature of liquid spraying at top blowing out
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

Research of the influence of low potential on bihavior splashing of liquid when its top blowing by physical simulation
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Industrial researches of features of influence of electric impacts on the number of metal drops in slag at the top oxygen blowing
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Research of features of low-voltage potential influence on processes of metal refinement in the oxygen converter
von: S. I. Semykin, et al.
Veröffentlicht: (2011)

Splashes of liquid phases at the top of the oxygen blowing
von: V. B. Okhotskij
Veröffentlicht: (2013)

Assess on the possibilities to reduce dust emissions from the converter with the use of low-voltage potential
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

The features of manganese liquid-phase reduction in the converter process with low-voltage electric potential
von: T. S. Golub, et al.
Veröffentlicht: (2017)

The features of manganese liquid-phase reduction in the converter process with low-voltage electric potential
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2018)

High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2019)

The study of peculiarities of formation and removal of droplets by blowing one- and two-phase liquids on the model of the LD-Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Comparative study on a physical model of specific features of top blowing through the tip with folded nozzles when blowing single-phase liquids
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

Laboratory research process ladle desulphurization powder lime and granulated magnesium when applied to melt the low-voltage electrical potential
von: S. I. Semykin, et al.
Veröffentlicht: (2014)

Research on the physical model of features of the behavior of a two-phase bath at top blowing through a tip with folded nozzles
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Study of influence of composition of cast-iron on the process of affinage of metal in the condition of applications of low-voltage potential
von: T. S. Kijashko, et al.
Veröffentlicht: (2009)

Development and implementation of resource-saving technologies converter melting using electricity low power
von: S. I. Semykin, et al.
Veröffentlicht: (2014)

Technological analysis of the efficiency of operation of periclase-carbon refractories in low-capacity converters
von: A. H. Cherniatevych, et al.
Veröffentlicht: (2021)

Studying the Possibility of Using Coherent Type Nozzles for Bof Blowing at the Gas Dynamic Simulation Stand
von: T. S. Golub, et al.
Veröffentlicht: (2023)

Working out and approbation of resource-saving technology of metal refinement at melting in the converter with low-voltage influences
von: T. S. Kijashko, et al.
Veröffentlicht: (2011)

Converter bath mixing peculiarities during upper and combined blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Application of the average method for analysis of dc voltage converters with interrupted currents in inductive elements
von: Yu. V. Rudenko
Veröffentlicht: (2020)

Evaluating the Effi ciency of Using Coherent-Type Nozzles for the Conditions of Additional Postcombustion of CO to CO2 in the Wor king Space of the Oxygen Converter
von: T. S. Golub, et al.
Veröffentlicht: (2024)

Rational technology of preparation of iron for smelting of low-sulphur oxygen converter steel
von: A. S. Vergun, et al.
Veröffentlicht: (2012)

The development of the method of registration of the electrical potential on blast furnace tuyeres
von: V. I. Bolshakov, et al.
Veröffentlicht: (2013)

Evaluation of the efficiency of using the thermal potential of the environment and the top layers of the land of Ukraine
von: Yu. P. Morozov, et al.
Veröffentlicht: (2020)

EVALUATION OF THE EFFICIENCY OF USING THE THERMAL POTENTIAL OF THE ENVIRONMENT AND THE TOP LAYERS OF THE LAND OF UKRAINE
von: Morozov, Yu., et al.
Veröffentlicht: (2020)

High temperature modeling of BOF bath blowing by using three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

Study of features of low potential impact on the formation slag phase in the work environment industrial 60-t converter pjsc "EVRAZ DMZ im. Petrovskogo"
von: S. I. Semykin, et al.
Veröffentlicht: (2012)

Resonant Converters with the Dosed Transfer of Energy for Low-Voltage Power Distribution Networks3
von: G. V. Pavlov, et al.
Veröffentlicht: (2016)

Methods of increasing efficiency and improving the main parameters of DC/DC converters with a longitudinal switc
von: I. V. Volkov, et al.
Veröffentlicht: (2020)

Laboratory research of effect feature electromagnetic influence of low specific power on casted and heat treated low-carbon steel mechanical properties
von: S. I. Semykin, et al.
Veröffentlicht: (2014)