Effect of microstructure parameters of Cr-Mn-(Ni)-N steels on susceptibility to carburization
Gespeichert in:
| Datum: | 2009 |
|---|---|
| Hauptverfasser: | I. F. Kirchu, T. V. Stepanova |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2009
|
| Schriftenreihe: | Metal Science and Treatment of Metals |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000401807 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Mechanical and functional properties of Cr-(Ni)-Mn-N austenitic heat-resistant steels
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2019)
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2019)
Механічні та функціональні властивості Cr-(Ni)-Mn-N аустенітних жароміцних і жаростійких сталей
von: Shypytsyn, S.Ya, et al.
Veröffentlicht: (2019)
von: Shypytsyn, S.Ya, et al.
Veröffentlicht: (2019)
Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
von: Kolodiy, I.V., et al.
Veröffentlicht: (2021)
von: Kolodiy, I.V., et al.
Veröffentlicht: (2021)
Cavitation-resistant Cr-Mn-N-V steel for high-temperature energy
von: P. N. Kucherenko, et al.
Veröffentlicht: (2018)
von: P. N. Kucherenko, et al.
Veröffentlicht: (2018)
Effect of joint carburization and desulfurization of iron to its quality
von: O. V. Kuksa, et al.
Veröffentlicht: (2012)
von: O. V. Kuksa, et al.
Veröffentlicht: (2012)
Formation of dislocation structure of Cr – Mn – N steels at deformation under pressure and cavitation
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)
Nitriding, oxidation and carburization of titanium and steels in non-self maintained gaseous discharge
von: Timoshenko, A.I., et al.
Veröffentlicht: (2012)
von: Timoshenko, A.I., et al.
Veröffentlicht: (2012)
Magnetostrictive and magnetocaloric effects in Mn0.89Cr0.11NiGe
von: A. P. Sivachenko, et al.
Veröffentlicht: (2013)
von: A. P. Sivachenko, et al.
Veröffentlicht: (2013)
Peculiarities of microstructure of multilayer welds with different susceptibility to hot cracking
von: K. A. Jushchenko, et al.
Veröffentlicht: (2016)
von: K. A. Jushchenko, et al.
Veröffentlicht: (2016)
Application of nitride dispersion strengthening in creating Cr – Mn – N austenitic steels for high-temperature Heat Power Engineering
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2012)
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2012)
Effect of deposition parameters on microstructure and tribological properties of hard CA-PVD multi-component TiAlCrN and TiAlCrCN coatings
von: Misiruk, I.O., et al.
Veröffentlicht: (2020)
von: Misiruk, I.O., et al.
Veröffentlicht: (2020)
Effect of hydrostatic pressure on the magnetic susceptibility of MnF2 single crystal
von: A. S. Panfilov, et al.
Veröffentlicht: (2021)
von: A. S. Panfilov, et al.
Veröffentlicht: (2021)
Structure Fe - Cr - Mn – N steel after pressure deformation and cavitation wear
von: P. M. Kucherenko
Veröffentlicht: (2018)
von: P. M. Kucherenko
Veröffentlicht: (2018)
Структура високоентропійних сплавів CrMnFeCoNi і CrMnFeCoNi₂Cu та термостабільність їх електротранспортних властивостей
von: Крапівка, М.О., et al.
Veröffentlicht: (2015)
von: Крапівка, М.О., et al.
Veröffentlicht: (2015)
Микроструктура и свойства высокоэнтропийных сплавов СoCrFeMnNiV₀,₂₅C₀,₁₇₅ И CrFe₂MnNiV₀,₂₅C₀,₁₇₅
von: Тихоновский, М.А., et al.
Veröffentlicht: (2016)
von: Тихоновский, М.А., et al.
Veröffentlicht: (2016)
Comparative study of helium bubble formation in Cr-Fe-Ni-Mn high-entropy alloy and 18Cr10NiTi steel after irradiation and post-irradiation annealing
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)
Influence of nitrogen on the microstructure, hardness and tribological properties of Cr–Ni–B–C–N films deposited by DC magnetron sputtering
von: O. O. Onopriienko, et al.
Veröffentlicht: (2020)
von: O. O. Onopriienko, et al.
Veröffentlicht: (2020)
Магнитострикция и магнитокалорический эффект в Mn₀,₈₉Cr₀,₁₁NiGe
von: Сиваченко, А.П., et al.
Veröffentlicht: (2013)
von: Сиваченко, А.П., et al.
Veröffentlicht: (2013)
Structure of the High-Entropy CrMnFeCoNi and CrMnFeCoNi2Cu Alloys and Thermal Stability of Its Electrical Transport Properties
von: M. O. Krapivka, et al.
Veröffentlicht: (2015)
von: M. O. Krapivka, et al.
Veröffentlicht: (2015)
Nano-microcomposite and combined coatings on Ti-Si-N/WC-Co-Cr/steel and Ti-Si-N/(Cr₃C₂ )₇₅-(NiCr)₂₅ base: their structure and properties
von: Erdybaeva, N.K.
Veröffentlicht: (2010)
von: Erdybaeva, N.K.
Veröffentlicht: (2010)
Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)
Microstructure and abrasive wear resistance of the deposited Ni–Cr–B–Si material with dispersive phases inclusions
von: S. O. Luzan, et al.
Veröffentlicht: (2020)
von: S. O. Luzan, et al.
Veröffentlicht: (2020)
Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
von: Sheng, L.Y.
Veröffentlicht: (2016)
von: Sheng, L.Y.
Veröffentlicht: (2016)
Influence of replacement of Mn by Cr on magnetocaloric properties of quenched NiMn1–xCrxGe alloys
von: E. Zubov, et al.
Veröffentlicht: (2018)
von: E. Zubov, et al.
Veröffentlicht: (2018)
Особливості взаємодії лігатури Fe-Ni-Cr-Cu-Mn з сірим чавуном
von: Parkhomchuk, Zh. V., et al.
Veröffentlicht: (2024)
von: Parkhomchuk, Zh. V., et al.
Veröffentlicht: (2024)
Prospects of use steel strengthened by VN for slab caster rollers instead of 25Kh1M1F steel
von: I. F. Kirchu, et al.
Veröffentlicht: (2015)
von: I. F. Kirchu, et al.
Veröffentlicht: (2015)
Low-temperature mechanical properties and thermally activated plasticity parameters of the CrMnFeCoNi2Cu high entropy alloy
von: E. D. Tabachnikova, et al.
Veröffentlicht: (2020)
von: E. D. Tabachnikova, et al.
Veröffentlicht: (2020)
High-Temperature Diffractometry Study of Features of the FeCoNiMnCr Alloy Oxidation
von: M. V. Karpets, et al.
Veröffentlicht: (2014)
von: M. V. Karpets, et al.
Veröffentlicht: (2014)
Высокотемпературное дифрактометрическое исследование особенностей окисления сплава FeCoNiMnCr
von: Карпец, М.В., et al.
Veröffentlicht: (2014)
von: Карпец, М.В., et al.
Veröffentlicht: (2014)
Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
von: M. I. Pashechko
Veröffentlicht: (2010)
von: M. I. Pashechko
Veröffentlicht: (2010)
The Cr-Ni-Si steel forming in result of gas-electrical arc fusion
von: Ju. I. Lopukhov
Veröffentlicht: (2009)
von: Ju. I. Lopukhov
Veröffentlicht: (2009)
Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
Nano-microcomposite and combined coatings on Ti-Si-N/WC-Co-Cr/steel and Ti-Si-N/(Cr3C2)75-(NiCr)25 base: their structure and properties
von: N. K. Erdybaeva
Veröffentlicht: (2010)
von: N. K. Erdybaeva
Veröffentlicht: (2010)
The texture features of the deformed CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
Hardening of Cr-Fe-Ni-Mn high-entropy alloys caused by the irradiation with argon ions
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2017)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2017)
Analysis of the Stability of α→γ Plane Front of Recrystallization in Ferritic Alloys During Carburization
von: Movchan, O.V., et al.
Veröffentlicht: (2019)
von: Movchan, O.V., et al.
Veröffentlicht: (2019)
Influence of oxidation on surface state and electrode capacitance of Zr–Mn–Cr–Ni–V alloy
von: Ju. M. Solonin, et al.
Veröffentlicht: (2017)
von: Ju. M. Solonin, et al.
Veröffentlicht: (2017)
Electrochemical properties of mechanically activated composite based on ZrMnCrNiV alloy
von: Ju. M. Solonin, et al.
Veröffentlicht: (2016)
von: Ju. M. Solonin, et al.
Veröffentlicht: (2016)
Assessment of susceptibility of structural steels to lamellar fractures. Development of new approaches
von: A. V. Bernatskij, et al.
Veröffentlicht: (2012)
von: A. V. Bernatskij, et al.
Veröffentlicht: (2012)
On the practical application of the 18Cr10NiTi steel after barocryodeformation
von: P. A. Khajmovich
Veröffentlicht: (2016)
von: P. A. Khajmovich
Veröffentlicht: (2016)
Ähnliche Einträge
-
Mechanical and functional properties of Cr-(Ni)-Mn-N austenitic heat-resistant steels
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2019) -
Механічні та функціональні властивості Cr-(Ni)-Mn-N аустенітних жароміцних і жаростійких сталей
von: Shypytsyn, S.Ya, et al.
Veröffentlicht: (2019) -
Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
von: Kolodiy, I.V., et al.
Veröffentlicht: (2021) -
Cavitation-resistant Cr-Mn-N-V steel for high-temperature energy
von: P. N. Kucherenko, et al.
Veröffentlicht: (2018) -
Effect of joint carburization and desulfurization of iron to its quality
von: O. V. Kuksa, et al.
Veröffentlicht: (2012)