Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
Збережено в:
| Дата: | 2020 |
|---|---|
| Автори: | A. A. Rudenko, V. I. Zaitsev, Yu. V. Sirobaba |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2020
|
| Назва видання: | Journal of mechanical engineering |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001105688 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
за авторством: Rudenko, Andrii A., та інші
Опубліковано: (2020)
за авторством: Rudenko, Andrii A., та інші
Опубліковано: (2020)
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
за авторством: Rudenko, Andrii A., та інші
Опубліковано: (2020)
за авторством: Rudenko, Andrii A., та інші
Опубліковано: (2020)
Criterion for choosing multifactor experiment design for studying of complex processes
за авторством: S. V. Tynyna, та інші
Опубліковано: (2017)
за авторством: S. V. Tynyna, та інші
Опубліковано: (2017)
Assembly technology and design features of microelectronic coordinate-sensitive detectors
за авторством: V. P. Sidorenko, та інші
Опубліковано: (2018)
за авторством: V. P. Sidorenko, та інші
Опубліковано: (2018)
Computer-aided Design of Centrifugal Pump Hydraulics
за авторством: A. S. Kostornoj
Опубліковано: (2015)
за авторством: A. S. Kostornoj
Опубліковано: (2015)
Computer-aided Design of Centrifugal Pump Hydraulics
за авторством: Косторной, А. С.
Опубліковано: (2015)
за авторством: Косторной, А. С.
Опубліковано: (2015)
Computer-aided Design of Centrifugal Pump Hydraulics
за авторством: Косторной, А. С.
Опубліковано: (2015)
за авторством: Косторной, А. С.
Опубліковано: (2015)
Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
за авторством: M. A. Kuznetsov, та інші
Опубліковано: (2019)
за авторством: M. A. Kuznetsov, та інші
Опубліковано: (2019)
Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
за авторством: Kuznetsov, M.A., та інші
Опубліковано: (2019)
за авторством: Kuznetsov, M.A., та інші
Опубліковано: (2019)
Research of different types of ropes and choosing optimal for designs of rope-profile conductor
за авторством: A. A. Rubel, та інші
Опубліковано: (2018)
за авторством: A. A. Rubel, та інші
Опубліковано: (2018)
Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
за авторством: Kuznetsov, Mikhail A., та інші
Опубліковано: (2019)
за авторством: Kuznetsov, Mikhail A., та інші
Опубліковано: (2019)
Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
за авторством: Kuznetsov, Mikhail A., та інші
Опубліковано: (2019)
за авторством: Kuznetsov, Mikhail A., та інші
Опубліковано: (2019)
Application of physical factors when designing devitalized vascular scaffolds
за авторством: D. V. Byzov, та інші
Опубліковано: (2011)
за авторством: D. V. Byzov, та інші
Опубліковано: (2011)
Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
за авторством: O. S. Tsakanian, та інші
Опубліковано: (2021)
за авторством: O. S. Tsakanian, та інші
Опубліковано: (2021)
Design of thermoelectric cascade modules for solid fuel TEG
за авторством: L. M. Vykhor, та інші
Опубліковано: (2017)
за авторством: L. M. Vykhor, та інші
Опубліковано: (2017)
Design of thermoelectric cascade modules for solid fuel TEG
за авторством: L. N. Vikhor, та інші
Опубліковано: (2017)
за авторством: L. N. Vikhor, та інші
Опубліковано: (2017)
Design and development of sensor modules to multisensor medical devices
за авторством: M. I. Mudrenko, та інші
Опубліковано: (2017)
за авторством: M. I. Mudrenko, та інші
Опубліковано: (2017)
The new design and technological solutions for the led modules for retrofit lamps
за авторством: V. N. Borshchev, та інші
Опубліковано: (2016)
за авторством: V. N. Borshchev, та інші
Опубліковано: (2016)
Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
за авторством: Цаканян, О. С., та інші
Опубліковано: (2021)
за авторством: Цаканян, О. С., та інші
Опубліковано: (2021)
Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
за авторством: Цаканян, О. С., та інші
Опубліковано: (2021)
за авторством: Цаканян, О. С., та інші
Опубліковано: (2021)
Investigation of the correlation structure of the vibration signal of the decanter bearing assembly
за авторством: I. M. Javorskyj, та інші
Опубліковано: (2024)
за авторством: I. M. Javorskyj, та інші
Опубліковано: (2024)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
за авторством: Ju. M. Matsevityj, та інші
Опубліковано: (2011)
за авторством: Ju. M. Matsevityj, та інші
Опубліковано: (2011)
Computer design of segmented PbTe based thermoelectric modules
за авторством: L. T. Strutynska, та інші
Опубліковано: (2012)
за авторством: L. T. Strutynska, та інші
Опубліковано: (2012)
The turbine drive feed pumps designing, based on the low-mass-flow LPI turbines
за авторством: M. I. Grinman, та інші
Опубліковано: (2012)
за авторством: M. I. Grinman, та інші
Опубліковано: (2012)
Effect of bearing faces design in the walking excavator in its interaction with soils in different deposits
за авторством: O. V. Dzerzhynska
Опубліковано: (2017)
за авторством: O. V. Dzerzhynska
Опубліковано: (2017)
Research influence of aerodynamic forces on the design of vessels when training them in the depth of the shaft
за авторством: A. A. Rubel, та інші
Опубліковано: (2017)
за авторством: A. A. Rubel, та інші
Опубліковано: (2017)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
за авторством: Мацевитый, Ю. М., та інші
Опубліковано: (2016)
за авторством: Мацевитый, Ю. М., та інші
Опубліковано: (2016)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
за авторством: Мацевитый, Ю. М., та інші
Опубліковано: (2016)
за авторством: Мацевитый, Ю. М., та інші
Опубліковано: (2016)
The value of essential features when establishing the scope of legal protection of industrial design
за авторством: O. O. Bondarenko
Опубліковано: (2014)
за авторством: O. O. Bondarenko
Опубліковано: (2014)
Separate reasons for limiting the freedom of contract when choosing the type of transaction
за авторством: Yu. O. Rasko
Опубліковано: (2022)
за авторством: Yu. O. Rasko
Опубліковано: (2022)
Institutional Restrictions when Choosing the Policy of Innovative Development of Ukrainian Economy
за авторством: T. K. Mosiichuk
Опубліковано: (2015)
за авторством: T. K. Mosiichuk
Опубліковано: (2015)
The experience in design and the method of calculation of the strength and dynamic characteristics of the bearing structures of reversible hydraulic machines
за авторством: A. V. Linnik, та інші
Опубліковано: (2013)
за авторством: A. V. Linnik, та інші
Опубліковано: (2013)
Solid state microwave modules designed for millimiter wave electronic equipment and systems
за авторством: N. F. Karushkin, та інші
Опубліковано: (2016)
за авторством: N. F. Karushkin, та інші
Опубліковано: (2016)
The turbine drive feed pumps designing, based on the low-mass-flow LPI turbines
за авторством: Гринман, М. И., та інші
Опубліковано: (2012)
за авторством: Гринман, М. И., та інші
Опубліковано: (2012)
The turbine drive feed pumps designing, based on the low-mass-flow LPI turbines
за авторством: Гринман, М. И., та інші
Опубліковано: (2012)
за авторством: Гринман, М. И., та інші
Опубліковано: (2012)
Design solutions adopted when changing the way of tunneling of the pressure tunnel Mtkvari HPS (Georgia)
за авторством: Ju. P. Jurchuk, та інші
Опубліковано: (2012)
за авторством: Ju. P. Jurchuk, та інші
Опубліковано: (2012)
Design calculation of the pipeline systems for hydromechanization technologies when steel pipes are replaced by the polyethylene ones
за авторством: E. V. Semenenko, та інші
Опубліковано: (2015)
за авторством: E. V. Semenenko, та інші
Опубліковано: (2015)
Design and development of a software module for testing based on the MediaWiki server
за авторством: V. O. Bolilyi, та інші
Опубліковано: (2022)
за авторством: V. O. Bolilyi, та інші
Опубліковано: (2022)
Determining design parameters for small hydro power plant when controlling the power by watercourse
за авторством: M. R. Ibrahimova
Опубліковано: (2016)
за авторством: M. R. Ibrahimova
Опубліковано: (2016)
The experience in design and the method of calculation of the strength and dynamic characteristics of the bearing structures of reversible hydraulic machines
за авторством: Линник, А. В., та інші
Опубліковано: (2015)
за авторством: Линник, А. В., та інші
Опубліковано: (2015)
Схожі ресурси
-
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
за авторством: Rudenko, Andrii A., та інші
Опубліковано: (2020) -
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
за авторством: Rudenko, Andrii A., та інші
Опубліковано: (2020) -
Criterion for choosing multifactor experiment design for studying of complex processes
за авторством: S. V. Tynyna, та інші
Опубліковано: (2017) -
Assembly technology and design features of microelectronic coordinate-sensitive detectors
за авторством: V. P. Sidorenko, та інші
Опубліковано: (2018) -
Computer-aided Design of Centrifugal Pump Hydraulics
за авторством: A. S. Kostornoj
Опубліковано: (2015)