Producing permanent joints of pipes from structured polyethylene
Збережено в:
| Дата: | 2009 |
|---|---|
| Автори: | N. G. Korab, S. V. Kabysh, A. V. Kostenko |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2009
|
| Назва видання: | Automatic Welding |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000466011 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
The quality and operational characteristics of welded joints of pipes from different types of polyethylene
за авторством: M. O. Kovalchuk, та інші
Опубліковано: (2020)
за авторством: M. O. Kovalchuk, та інші
Опубліковано: (2020)
Application of heat monitoring in welding polyethylene pipes
за авторством: Ju. Glukhovskij, та інші
Опубліковано: (2010)
за авторством: Ju. Glukhovskij, та інші
Опубліковано: (2010)
Brazing as a Promising Method of Producing Permanent Joints
за авторством: S. V. Maksymova
Опубліковано: (2020)
за авторством: S. V. Maksymova
Опубліковано: (2020)
Structural features and thermal characteristics of welded joints technical polyethylenes
за авторством: A. M. Halchun, та інші
Опубліковано: (2015)
за авторством: A. M. Halchun, та інші
Опубліковано: (2015)
Stress-strain state of polymer pipe welded joints made by butt welding under angle
за авторством: E. S. Nikonova, та інші
Опубліковано: (2009)
за авторством: E. S. Nikonova, та інші
Опубліковано: (2009)
Calculation of large polyethylene pipes with a hollow wall
за авторством: M. H. Stashchuk, та інші
Опубліковано: (2012)
за авторством: M. H. Stashchuk, та інші
Опубліковано: (2012)
X-ray TV inspection of the quality of welding polyethylene pipes
за авторством: M. M. Karmanov, та інші
Опубліковано: (2021)
за авторством: M. M. Karmanov, та інші
Опубліковано: (2021)
The study of magnetic field of power cables in polyethylene pipes with magnetic properties
за авторством: A. A. Shcherba, та інші
Опубліковано: (2020)
за авторством: A. A. Shcherba, та інші
Опубліковано: (2020)
Modeling of temperature fields and stresses in polyethylene pipes in welding with a hot tool
за авторством: N. P. Nesterenko, та інші
Опубліковано: (2009)
за авторством: N. P. Nesterenko, та інші
Опубліковано: (2009)
Features of technology and modern trends in the field of butt welding of polyethylene pipes (Review)
за авторством: M. V. Yurzhenko
Опубліковано: (2019)
за авторством: M. V. Yurzhenko
Опубліковано: (2019)
Calculation of operating modes for hydrotransport complexes with main pipelines consisting of polyethylene and steel pipe sections
за авторством: E. V. Semenenko, та інші
Опубліковано: (2013)
за авторством: E. V. Semenenko, та інші
Опубліковано: (2013)
Design calculation of the pipeline systems for hydromechanization technologies when steel pipes are replaced by the polyethylene ones
за авторством: E. V. Semenenko, та інші
Опубліковано: (2015)
за авторством: E. V. Semenenko, та інші
Опубліковано: (2015)
Influence of hydrogen-methane gas mixtures on the physical and chemical structure of polyethylene pipes of the operating gasdistribution networks of Ukraine
за авторством: M. V. Yurzhenko, та інші
Опубліковано: (2023)
за авторством: M. V. Yurzhenko, та інші
Опубліковано: (2023)
Methods of calculation of strength of polyethylene pipes with a cellular wall (A review)
за авторством: M. H. Stashchuk, та інші
Опубліковано: (2013)
за авторством: M. H. Stashchuk, та інші
Опубліковано: (2013)
Calculation of parameters for hydraulic conveying by polyethylene pipes of par-ticles with substantially nonuniform density and size
за авторством: E. V. Semenenko, та інші
Опубліковано: (2013)
за авторством: E. V. Semenenko, та інші
Опубліковано: (2013)
Structure and properties of welded joints of one-type polyethylene formed under constant magnetic field
за авторством: V. L. Demchenko, та інші
Опубліковано: (2017)
за авторством: V. L. Demchenko, та інші
Опубліковано: (2017)
Producing of permanent joints of alloys on y-TiAl base using multilayer nanostructured foil Ti/Al applying the method of diffusion welding in vacuum
за авторством: A. I. Ustinov, та інші
Опубліковано: (2009)
за авторством: A. I. Ustinov, та інші
Опубліковано: (2009)
Influence of metal structure of pipes on mechanical properties of flash-butt welded joints
за авторством: S. I. Kuchuk-Jatsenko, та інші
Опубліковано: (2017)
за авторством: S. I. Kuchuk-Jatsenko, та інші
Опубліковано: (2017)
Properties and structure of tubular joints produced by orbital electron beam welding
за авторством: E. G. Ternovoj, та інші
Опубліковано: (2011)
за авторством: E. G. Ternovoj, та інші
Опубліковано: (2011)
Technology of producing pipes of molybdenum ingots of electron beam melting
за авторством: V. O. Mushegjan, та інші
Опубліковано: (2010)
за авторством: V. O. Mushegjan, та інші
Опубліковано: (2010)
Experimental study regarding the influence of welding parameters on the mechanical behavior of high density polyethylene pipes
за авторством: I. Ramadan, та інші
Опубліковано: (2021)
за авторством: I. Ramadan, та інші
Опубліковано: (2021)
Cracks in welded joints of large-diameter pipes and measures of their prevention
за авторством: A. A. Rybakov, та інші
Опубліковано: (2013)
за авторством: A. A. Rybakov, та інші
Опубліковано: (2013)
Producing nitinol brazed joints (Review)
за авторством: S. V. Maksymova, та інші
Опубліковано: (2022)
за авторством: S. V. Maksymova, та інші
Опубліковано: (2022)
Equipment for preparation of pipe ends to welding of position butt joints of pipeline
за авторством: L. M. Lobanov, та інші
Опубліковано: (2015)
за авторством: L. M. Lobanov, та інші
Опубліковано: (2015)
Methods for mitigation of magnetic field generated by underground power cables in polyethylene pipes made of composite magnetic material
за авторством: I. M. Kucheriava
Опубліковано: (2022)
за авторством: I. M. Kucheriava
Опубліковано: (2022)
Potential means for mitigation of magnetic field generated by underground power cables in polyethylene pipes made of composite magnetic material
за авторством: I. M. Kucheriava
Опубліковано: (2023)
за авторством: I. M. Kucheriava
Опубліковано: (2023)
Optimization of chemical composition and structure of metal of repair welds in remedy of defects in welded joints of pipes by using multilayer welding
за авторством: A. A. Rybakov, та інші
Опубліковано: (2013)
за авторством: A. A. Rybakov, та інші
Опубліковано: (2013)
Features of structure and properties of bimetal joints of dissimilar metals produced by friction stir welding process
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2013)
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2013)
Segmentation of overlapping defects on digital radiographic images of welded joints of pipes
за авторством: I. B. Ivasenko
Опубліковано: (2016)
за авторством: I. B. Ivasenko
Опубліковано: (2016)
Joint formation in magnetically-impelled arc butt welding of thick-walled pipes from high-strength steels
за авторством: V. S. Kachinskij, та інші
Опубліковано: (2017)
за авторством: V. S. Kachinskij, та інші
Опубліковано: (2017)
Producing of coaxial joints of dissimilar metals with the help of explosion
за авторством: A. G. Bryzgalin, та інші
Опубліковано: (2024)
за авторством: A. G. Bryzgalin, та інші
Опубліковано: (2024)
Influence of activators on the quality of spirally-welded pipes, produced with aplication of high-frequency currents
за авторством: V. V. Polukhin, та інші
Опубліковано: (2018)
за авторством: V. V. Polukhin, та інші
Опубліковано: (2018)
Evaluation of strength of joints produced by welding with concurrent brazing
за авторством: V. I. Savuljak, та інші
Опубліковано: (2015)
за авторством: V. I. Savuljak, та інші
Опубліковано: (2015)
Characteristics of structural strength of D16T alloy welded joints, produced by friction stir welding
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2018)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2018)
The effect of hydrogen sulfide on the corrosion and mechanical properties of pipe steel welded joints
за авторством: H. V. Chumalo
Опубліковано: (2012)
за авторством: H. V. Chumalo
Опубліковано: (2012)
Effect of chemical composition of microalloy steel and rate of cooling of HAZ metal of pipe welded joints on its structure and impact strength
за авторством: A. A. Rybakov, та інші
Опубліковано: (2013)
за авторством: A. A. Rybakov, та інші
Опубліковано: (2013)
Evaluation of efficiency of reduction of residual stresses in circumferential joints of pipes using postweld explosion treatment
за авторством: A. G. Bryzgalin
Опубліковано: (2014)
за авторством: A. G. Bryzgalin
Опубліковано: (2014)
The kinetics of deposition of polyaniline on polyethylene and polyethylene terephthalate substrates-matrices
за авторством: Yu. Stetsiv, та інші
Опубліковано: (2016)
за авторством: Yu. Stetsiv, та інші
Опубліковано: (2016)
Role of forming device on structure and phase composition of joints produced in press butt braze welding
за авторством: A. S. Pismennyj, та інші
Опубліковано: (2010)
за авторством: A. S. Pismennyj, та інші
Опубліковано: (2010)
Induction heating of rotating nonmagnetic billet in magnetic field produced by high-parameter permanent magnets
за авторством: Doležel, Ivo, та інші
Опубліковано: (2014)
за авторством: Doležel, Ivo, та інші
Опубліковано: (2014)
Схожі ресурси
-
The quality and operational characteristics of welded joints of pipes from different types of polyethylene
за авторством: M. O. Kovalchuk, та інші
Опубліковано: (2020) -
Application of heat monitoring in welding polyethylene pipes
за авторством: Ju. Glukhovskij, та інші
Опубліковано: (2010) -
Brazing as a Promising Method of Producing Permanent Joints
за авторством: S. V. Maksymova
Опубліковано: (2020) -
Structural features and thermal characteristics of welded joints technical polyethylenes
за авторством: A. M. Halchun, та інші
Опубліковано: (2015) -
Stress-strain state of polymer pipe welded joints made by butt welding under angle
за авторством: E. S. Nikonova, та інші
Опубліковано: (2009)