Finite Element Analysis of Hyperelastoplastic Mixed-hardening Materials under Plane Stresses
Збережено в:
| Дата: | 2024 |
|---|---|
| Автор: | J. P. Pascon |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2024
|
| Назва видання: | International Applied Mechanics |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001468305 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
за авторством: Li, G.H., та інші
Опубліковано: (2016)
за авторством: Li, G.H., та інші
Опубліковано: (2016)
Analysis of the stress-strain state of the Bridgman specimen by the finite elements method under axial tension
за авторством: T. M. Lenkovskyi, та інші
Опубліковано: (2020)
за авторством: T. M. Lenkovskyi, та інші
Опубліковано: (2020)
Plane Problem on Stress Distribution at Neighborhood of the Crack under Tension of Linearly Strengthening Material
за авторством: L. P. Khoroshun, та інші
Опубліковано: (2014)
за авторством: L. P. Khoroshun, та інші
Опубліковано: (2014)
Finite element analysis of elastic-plastic state of the plane with elliptic inclusion in the presence of interphase crack
за авторством: Ya. Adlutskyi, та інші
Опубліковано: (2020)
за авторством: Ya. Adlutskyi, та інші
Опубліковано: (2020)
Fatigue parameter based on the assessment of the stress components on all material planes
за авторством: S. Lu, та інші
Опубліковано: (2019)
за авторством: S. Lu, та інші
Опубліковано: (2019)
FINITE-ELEMENT ANALYSIS OF THE STRESS AND STRAIN FILED OF THIN FUNCTIONALLY GRADED PLATES WITH A CIRCULAR HOLE UNDER VARIOUS TYPES OF LOADING
за авторством: HART, E. L., та інші
Опубліковано: (2026)
за авторством: HART, E. L., та інші
Опубліковано: (2026)
Stress concentration at the holes in an elastic plane under antiplane strain
за авторством: M. P. Savruk, та інші
Опубліковано: (2012)
за авторством: M. P. Savruk, та інші
Опубліковано: (2012)
On a nonstationary loading at a half-plane surface under mixed boundary conditions
за авторством: V. D. Kubenko
Опубліковано: (2014)
за авторством: V. D. Kubenko
Опубліковано: (2014)
A Non-stationary Problem for an Elastic Half-plane under Mixed Boundary Conditions
за авторством: V. D. Kubenko
Опубліковано: (2016)
за авторством: V. D. Kubenko
Опубліковано: (2016)
Plane quasistatic thermoelasticity problem for half-space with coating under mixed conditions of heating
за авторством: I. M. Turchyn, та інші
Опубліковано: (2015)
за авторством: I. M. Turchyn, та інші
Опубліковано: (2015)
Seedlings under the action of hardening temperature
за авторством: K. M. Havva, та інші
Опубліковано: (2022)
за авторством: K. M. Havva, та інші
Опубліковано: (2022)
The plane mixed thermoelasticity problem for the semi-strip
за авторством: N. D. Vaisfeld, та інші
Опубліковано: (2015)
за авторством: N. D. Vaisfeld, та інші
Опубліковано: (2015)
Configurations in finite projective planes
за авторством: Medvedev, V. K., та інші
Опубліковано: (1997)
за авторством: Medvedev, V. K., та інші
Опубліковано: (1997)
Study of the stress-strain state of ribbed cylindrical shells by the finite elements method
за авторством: Menabdishvili, P.Z, та інші
Опубліковано: (1985)
за авторством: Menabdishvili, P.Z, та інші
Опубліковано: (1985)
Exfoliation of the element of reinforcement of a half plane under cyclic loading
за авторством: M. M. Kundrat
Опубліковано: (2021)
за авторством: M. M. Kundrat
Опубліковано: (2021)
Stress distribution at V-shaped notches in orthotropic plane under symmetrical loading
за авторством: A. Kazberuk, та інші
Опубліковано: (2016)
за авторством: A. Kazberuk, та інші
Опубліковано: (2016)
FINITE-ELEMENT SIMULATION OF THE IN-SERVICE STRESS AND STRAIN FIELD OF HIP JOINT ELEMENTS BASED ON COMPUTER TOMOGRAPHY DATA
за авторством: HOROBETS, D. V., та інші
Опубліковано: (2026)
за авторством: HOROBETS, D. V., та інші
Опубліковано: (2026)
Modeling the Bauschinger effect in orthotropic materials with isotropic-kinematic hardening under isothermal and nonisothermal loading
за авторством: V. N. Bastun, та інші
Опубліковано: (2016)
за авторством: V. N. Bastun, та інші
Опубліковано: (2016)
Analysis by Finite Element Method to Redesign a Jointed-Telescopic Crane for Elevation of Personnel
за авторством: Diosdado-De la Peña, J.A., та інші
Опубліковано: (2017)
за авторством: Diosdado-De la Peña, J.A., та інші
Опубліковано: (2017)
A Stress State of Elastic Half-Plane under Non-Stationary Loading
за авторством: V. D. Kubenko
Опубліковано: (2015)
за авторством: V. D. Kubenko
Опубліковано: (2015)
Modeling of stress-strain state by the finite-element method at tests on weldability (PVR-test)
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2016)
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2016)
Tension and Shear of the Transversely Isotropic Piezoceramic Plate with Circular Hole under the Mixed Boundary Conditions on Plane Sides
за авторством: Ju. Khoma, та інші
Опубліковано: (2017)
за авторством: Ju. Khoma, та інші
Опубліковано: (2017)
Impact of subsurface layers hardened by interstitial elements on titanium mechanical properties
за авторством: V. M. Fedirko, та інші
Опубліковано: (2019)
за авторством: V. M. Fedirko, та інші
Опубліковано: (2019)
Numerical analysis of the states of deformation and stress in the sealing elements
за авторством: Petrović, D., та інші
Опубліковано: (2012)
за авторством: Petrović, D., та інші
Опубліковано: (2012)
Stress distribution near rounded V-notches in an orthotropic elastic plane under antiplane strain
за авторством: M. P. Savruk, та інші
Опубліковано: (2019)
за авторством: M. P. Savruk, та інші
Опубліковано: (2019)
Stress state of an orthotropic plane with a two-sectional kinked crack under antiplane deformation
за авторством: M. P. Savruk, та інші
Опубліковано: (2020)
за авторством: M. P. Savruk, та інші
Опубліковано: (2020)
On the mechanism of hardening wurtzitic boron nitride under an indenter
за авторством: G. S. Olejnik
Опубліковано: (2013)
за авторством: G. S. Olejnik
Опубліковано: (2013)
Presentation of the moment scheme of finite elements to calculate stress-strain state of elastomer in tool systems
за авторством: S. I. Gomenjuk, та інші
Опубліковано: (2015)
за авторством: S. I. Gomenjuk, та інші
Опубліковано: (2015)
Investigation of the stress-strain state of a finite cylinder under compression forces effect
за авторством: V. P. Revenko
Опубліковано: (2010)
за авторством: V. P. Revenko
Опубліковано: (2010)
Evaluation of crack growth resistance of structural materials under mixed-mode fracture macromechanisms
за авторством: Wen Guang Song, та інші
Опубліковано: (2018)
за авторством: Wen Guang Song, та інші
Опубліковано: (2018)
Development of a Methodology for Calculating the Stress State and Resource of a Hydrogen Generator Using the Finite Element Method
за авторством: P. P. Hontarovskyi, та інші
Опубліковано: (2022)
за авторством: P. P. Hontarovskyi, та інші
Опубліковано: (2022)
Stress state of a plane wedge-shaped specimen with an edge crack under uniaxial tension
за авторством: V. S. Kravets
Опубліковано: (2017)
за авторством: V. S. Kravets
Опубліковано: (2017)
Analysis of Gas Nitriding Characteristics under Different Cold Hardening and Nitriding Pressure Conditions for Low-Carbon Low-Alloy Steel
за авторством: Zhou, Z A., та інші
Опубліковано: (2018)
за авторством: Zhou, Z A., та інші
Опубліковано: (2018)
Groups with the elements of finite ranks
за авторством: Gomer , V. O., та інші
Опубліковано: (1992)
за авторством: Gomer , V. O., та інші
Опубліковано: (1992)
Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
за авторством: Ju. Prikhodko, та інші
Опубліковано: (2013)
за авторством: Ju. Prikhodko, та інші
Опубліковано: (2013)
Moving Load of Incompressible Half-Plane with Initial Stresses
за авторством: Yu. P. Glukhov, та інші
Опубліковано: (2024)
за авторством: Yu. P. Glukhov, та інші
Опубліковано: (2024)
Analysis of the Stress State of a Layer with Two Cylindrical Elastic Inclusions and Mixed Boundary Conditions
за авторством: Yu. Miroshnikov, та інші
Опубліковано: (2022)
за авторством: Yu. Miroshnikov, та інші
Опубліковано: (2022)
Analysis of the Stress State of a Layer with Two Cylindrical Elastic Inclusions and Mixed Boundary Conditions
за авторством: Мирошников, В. Ю., та інші
Опубліковано: (2022)
за авторством: Мирошников, В. Ю., та інші
Опубліковано: (2022)
Analysis of the Stress State of a Layer with Two Cylindrical Elastic Inclusions and Mixed Boundary Conditions
за авторством: Мирошников, В. Ю., та інші
Опубліковано: (2022)
за авторством: Мирошников, В. Ю., та інші
Опубліковано: (2022)
Changes in Structure and Regularities of Copper Hardening under Screw Extrusion
за авторством: V. N. Varjukhin, та інші
Опубліковано: (2013)
за авторством: V. N. Varjukhin, та інші
Опубліковано: (2013)
Схожі ресурси
-
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
за авторством: Li, G.H., та інші
Опубліковано: (2016) -
Analysis of the stress-strain state of the Bridgman specimen by the finite elements method under axial tension
за авторством: T. M. Lenkovskyi, та інші
Опубліковано: (2020) -
Plane Problem on Stress Distribution at Neighborhood of the Crack under Tension of Linearly Strengthening Material
за авторством: L. P. Khoroshun, та інші
Опубліковано: (2014) -
Finite element analysis of elastic-plastic state of the plane with elliptic inclusion in the presence of interphase crack
за авторством: Ya. Adlutskyi, та інші
Опубліковано: (2020) -
Fatigue parameter based on the assessment of the stress components on all material planes
за авторством: S. Lu, та інші
Опубліковано: (2019)