Buchumschlag

Wire-feeding based additive manufacturing of the Ti–6Al–4V alloy. Part II. Mechanical properties

Gespeichert in:

Bibliographische Detailangaben
Datum:	2023
Hauptverfasser:	M. O. Vasylyev, B. M. Mordyuk, S. M. Voloshko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2023
Schriftenreihe:	Progress in Physics of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001462077
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Wire-feeding based additive manufacturing of the Ti–6Al–4V alloy. Part I. Microstructure
von: M. O. Vasylyev, et al.
Veröffentlicht: (2023)

Microstructure of Co-Cr dental alloys manufactured by casting and 3D selective laser melting
von: M. O. Vasylyev, et al.
Veröffentlicht: (2022)

Application of SLM-technology for manufacture of dental implants from Ti – 6Al – 4V alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Application of ultrasonic surface treatment technologies in metals and alloys additive manufacturing
von: S. M. Voloshko, et al.
Veröffentlicht: (2024)

Evaluation of the possibility of manufacturing and repairing engine parts from aluminium alloys by method of additive technology
von: M. O. Gnatenko, et al.
Veröffentlicht: (2018)

Modification of an Al – Mn alloy by Ti addition and magnetic field processing
von: V. I. Dubodielov, et al.
Veröffentlicht: (2015)

Application of additive electron beam technologies for manufacture of parts of VT1-0 titanium alloy powders
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2017)

Basics of additive manufacturing processes for high-entropy alloys
von: A. V. Zavdoveev, et al.
Veröffentlicht: (2023)

Mцssbauer Spectroscopy of the Surface Layer of the Ti—6Al—4V Titanium Alloy Modified by Ultrasonic Impact Deformation
von: E. V. Polshin, et al.
Veröffentlicht: (2014)

Progress in additive manufacturing
von: A. V. Volokitin, et al.
Veröffentlicht: (2023)

Microstructure of titanium alloys produced by the method of layered electron beam surfacing using the wire of grade Ti6AI4V
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2020)

Modernization of method of plasma surfacing with side feeding of filler wire
von: K. P. Shapovalov, et al.
Veröffentlicht: (2012)

New approach for manufacturing Ti–6Al–4V+40%TiC metal-matrix composites by 3D printing using conic electron beam and cored wire. Pt. 2: Layered MMC/alloy materials, their main characteristics, and possible application as ballistic resistant materials
von: P. E. Markovsky, et al.
Veröffentlicht: (2023)

Features of the titanium Ti–6Al–4V alloy nanostructuri-zation using reversible alloying with hydrogen
von: E. N. Stepanova, et al.
Veröffentlicht: (2011)

Tribological performance of titanium alloy Ti–6Al–4V via CVD-diamond coatings
von: S. H. Din, et al.
Veröffentlicht: (2018)

Tribological performance of titanium alloy Ti–6Al–4V via CVD-diamond coatings
von: Din, S.H., et al.
Veröffentlicht: (2018)

Producing of intermetallic alloys of TiAl system with boron and lanthanum additions using the EBCHM method
von: N. P. Trigub, et al.
Veröffentlicht: (2011)

Cavitation erosion of Ti-6Al-4V alloy with vacuum-arc TiN and CrN coatings
von: Kuprin, А.S., et al.
Veröffentlicht: (2018)

Effect of microstructure, deformation mode and rate on mechanical behaviour of electron-beam melted Ti-6Al-4V and Ti-1.5Al-6.8Mo-4.5Fe alloys
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)

Effect of microstructure, deformation mode and rate on mechanical behaviour of electron-beam melted Ti-6Al-4V and Ti-1.5Al-6.8Mo-4.5Fe alloys
von: Ivasishin, O.M., et al.
Veröffentlicht: (2018)

Structural features and wear resistance of the TiAlN coating formed on the Ti–6Al–4V alloy by combining electric arc spraying and gas nitriding methods
von: O. V. Tkachuk, et al.
Veröffentlicht: (2024)

Influence of Pulse Laser Radiation on a Composition of the Surface Layers of Titanium Ti—6Al—4V Alloy
von: M. A. Vasilev, et al.
Veröffentlicht: (2015)

Electrochemical behaviour of Ti–6Al–4V alloy in Ringer&#039;s solution after oxynitration
von: O. V. Tkachuk, et al.
Veröffentlicht: (2018)

Microstructure and properties of multilayer materials on Ti–6Al–4V alloy base, produced by powder technology
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)

Use of welding additive technologies in manufacture of metal parts of a complex shape (Review)
von: A. S. Novodranov, et al.
Veröffentlicht: (2023)

Additive manufacturing of titanium-based materials using electron beam wire 3D printing approach: peculiarities, advantages, and prospects
von: O. M. Ivasishin, et al.
Veröffentlicht: (2023)

Wear resistance of Fe-Cr–Mn–Ti–Al coatings sprayed by powder wires
von: L. I. Bohun, et al.
Veröffentlicht: (2019)

Structure and properties of Al – Mg alloy with additions of silicon
von: A. A. Kulinich, et al.
Veröffentlicht: (2010)

Influence of heat treatment of specimens from Ti6Al4V manufactured by the technology of selective laser melting on structure and mechanical properties
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2022)

New approach for manufacturing Ti–6Al–4V+40%TiC metalmatrix composites by 3D printing using conic electron beam and cored wire. Pt. 1: Main features of the process, microstructure formation and basic characteristics of 3D printed material
von: P. E. Markovsky, et al.
Veröffentlicht: (2023)

Structure and mechanical properties of Al-Fe-Cr alloys for elevated temperatures, reinforced by nanoquasicrystalline particles additionally alloyed by Ti, Mo and Nb
von: Ju. V. Milman, et al.
Veröffentlicht: (2014)

Comparative hygienic evaluation of arc welding process at constant and pulsed electrode wire feed
von: O. G. Levchenko, et al.
Veröffentlicht: (2015)

Oxidation behavior and electrochemical corrosion performance of Ti₃Al alloy with TiAl coating
von: Yanjun Xi, et al.
Veröffentlicht: (2010)

Features of formation of crystallographic texture and properties in Ti-3Al-2.5V titanium alloy during tubes manufacture
von: Vakhrusheva, V.S., et al.
Veröffentlicht: (2019)

Peculiarities of formation of structure of welded joints in arc surfacing with a pulsed electrode wire feed
von: V. A. Lebedev, et al.
Veröffentlicht: (2016)

Properties of alloys on titanium aluminide γ-TiAl/α2-Ti3Al base at complex alloying
von: S. A. Firstov, et al.
Veröffentlicht: (2018)

Hydrogen interaction with Ti–Al–V–Fe, Al–V–Fe and Ti–Al–Mo–Fe master alloy powders
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2018)

Detonation coatings based on TiAl intermetallics with additions of non-metallic refractory compounds
von: A. L. Borysova, et al.
Veröffentlicht: (2023)

Characterization of Single SAW Velocities of Ti–6Al–4V Alloy as a Function of Porosity by SAM Simulation for Applications
von: Al-Sayad, Y., et al.
Veröffentlicht: (2018)

Effect of type of power source at 3D printing on structure and properties of Ti–6Al–4V alloy components
von: A. A. Pedash, et al.
Veröffentlicht: (2018)