Quantitative model for the prediction of the corrosion rate of cold-rolled 316L steel
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | A. Dittes, T. Mehner, S. Friedrich, B. Awiszus, T. Lampke |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2023
|
| Назва видання: | Materials Science (Physicochemical mechanics of materials) |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001453546 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Specific corrosion behaviour of 316L stainless steel in mineral water
за авторством: J. Capelle, та інші
Опубліковано: (2018)
за авторством: J. Capelle, та інші
Опубліковано: (2018)
Cold rolling improving at the expense of usage degree prediction of reserve plasticity
за авторством: A. G. Prisjazhnyj
Опубліковано: (2014)
за авторством: A. G. Prisjazhnyj
Опубліковано: (2014)
Heat treatment technology for stainless steel 316(L)
за авторством: F. Bahfie, та інші
Опубліковано: (2022)
за авторством: F. Bahfie, та інші
Опубліковано: (2022)
The influence of ultrasonic vibration on corrosion resistance of heat exchanger plates made of AISI 316 steel
за авторством: H. S. Vasyliev, та інші
Опубліковано: (2018)
за авторством: H. S. Vasyliev, та інші
Опубліковано: (2018)
Simplified Modelling of Tandem Cold Rolling
за авторством: Slimani, K., та інші
Опубліковано: (2018)
за авторством: Slimani, K., та інші
Опубліковано: (2018)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
за авторством: Krivchik, L., та інші
Опубліковано: (2021)
за авторством: Krivchik, L., та інші
Опубліковано: (2021)
Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
за авторством: Tang, C., та інші
Опубліковано: (2015)
за авторством: Tang, C., та інші
Опубліковано: (2015)
Profiling bypass rolls for improving the flatness of the bands at the cold rolling
за авторством: V. A. Nikolaev, та інші
Опубліковано: (2009)
за авторством: V. A. Nikolaev, та інші
Опубліковано: (2009)
Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
за авторством: Guan, B., та інші
Опубліковано: (2018)
за авторством: Guan, B., та інші
Опубліковано: (2018)
Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
за авторством: A. Falkowska, та інші
Опубліковано: (2015)
за авторством: A. Falkowska, та інші
Опубліковано: (2015)
Effects of SNPs CAPN316 and CAST282 on quantitative characteristics of offspring produced by dairy and beef bulls
за авторством: Ju. Ruban, та інші
Опубліковано: (2017)
за авторством: Ju. Ruban, та інші
Опубліковано: (2017)
Rolls roughness change during their exploitation and its impact on polluted cold-rolled metal
за авторством: E. N. Shebanits, та інші
Опубліковано: (2012)
за авторством: E. N. Shebanits, та інші
Опубліковано: (2012)
Hydrogen-Induced Effects in Annealed and Prestrained 316L-Type Stainless Steel Studied by Mechanical Spectroscopy
за авторством: Shyvaniuk, V.M.
Опубліковано: (2014)
за авторством: Shyvaniuk, V.M.
Опубліковано: (2014)
Hydrogen-Induced Effects in Annealed and Prestrained 316L-Type Stainless Steel Studied by Mechanical Spectroscopy
за авторством: V. M. Shyvaniuk
Опубліковано: (2014)
за авторством: V. M. Shyvaniuk
Опубліковано: (2014)
The Mathematical Simulation of Electromechanical Systems of Cold Rolling Mills
за авторством: E. S. Nazarova
Опубліковано: (2015)
за авторством: E. S. Nazarova
Опубліковано: (2015)
Rheological properties of steel at roll casting-rolling
за авторством: O. V. Nohovitsyn, та інші
Опубліковано: (2014)
за авторством: O. V. Nohovitsyn, та інші
Опубліковано: (2014)
Dynamic and Postdeformation Recrystallization of Nuclear-Grade 316LN Stainless Steel
за авторством: Zhang, R.H., та інші
Опубліковано: (2015)
за авторством: Zhang, R.H., та інші
Опубліковано: (2015)
Application of nanoindentation for investigation of radiation damage in SS316 stainless steel
за авторством: Tolmachova, G.N., та інші
Опубліковано: (2015)
за авторством: Tolmachova, G.N., та інші
Опубліковано: (2015)
Extension of the PJSC "Ilyich Iron and Steel Works" production range on the world market of cold rolled steel
за авторством: O. A. Pobegajlo, та інші
Опубліковано: (2017)
за авторством: O. A. Pobegajlo, та інші
Опубліковано: (2017)
Possible options for the production of tinplate and cold-rolled sheet in Ukraine
за авторством: Ju. V. Konovalov, та інші
Опубліковано: (2015)
за авторством: Ju. V. Konovalov, та інші
Опубліковано: (2015)
Radiation-induced hardening of Ar+-ion irradiated SS316 stainless steel
за авторством: S. A. Karpov, та інші
Опубліковано: (2016)
за авторством: S. A. Karpov, та інші
Опубліковано: (2016)
Comparative study of mechanical properties of 316L steel samples made on the ALFA-150 machine in compliance with world analogues
за авторством: H. A. Kononenko, та інші
Опубліковано: (2022)
за авторством: H. A. Kononenko, та інші
Опубліковано: (2022)
Investigation of corrosion of enamel cold water supply pipes
за авторством: S. O. Osadchuk, та інші
Опубліковано: (2023)
за авторством: S. O. Osadchuk, та інші
Опубліковано: (2023)
Study of normal anisotropy coefficient for the prediction of sheet metal formability ferritic corrosion resistant steel
за авторством: V. L. Hreshta
Опубліковано: (2015)
за авторством: V. L. Hreshta
Опубліковано: (2015)
The influence of carbon dioxide and gas condensate on steel 20 corrosion rate in deaerated NACE solutions
за авторством: Z. V. Slobodian, та інші
Опубліковано: (2013)
за авторством: Z. V. Slobodian, та інші
Опубліковано: (2013)
Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
за авторством: S. V. Bobyr, та інші
Опубліковано: (2020)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2020)
Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
за авторством: Ju. Gridin, та інші
Опубліковано: (2013)
за авторством: Ju. Gridin, та інші
Опубліковано: (2013)
Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
за авторством: V. H. Razdobrieiev, та інші
Опубліковано: (2022)
за авторством: V. H. Razdobrieiev, та інші
Опубліковано: (2022)
Status and trends of development of the production of cold-rolled tubes from titanium alloys
за авторством: A. V. Mishchenko
Опубліковано: (2019)
за авторством: A. V. Mishchenko
Опубліковано: (2019)
Structural Modification of AD-1 Aluminium Alloy by the Method of Cold Rolling with Shift
за авторством: V. M. Varyukhin, та інші
Опубліковано: (2015)
за авторством: V. M. Varyukhin, та інші
Опубліковано: (2015)
Structural Modification of AD-1 Aluminium Alloy by the Method of Cold Rolling with Shift
за авторством: Varyukhin, V.M., та інші
Опубліковано: (2015)
за авторством: Varyukhin, V.M., та інші
Опубліковано: (2015)
Effect of carbon on the corrosion behavior of thermally hardened rolled products
за авторством: V. H. Razdobrieiev
Опубліковано: (2020)
за авторством: V. H. Razdobrieiev
Опубліковано: (2020)
Quantitative estimation of antigen-specific cells in human blood after rhythmic cold effect
за авторством: V. G. Babijchuk
Опубліковано: (2009)
за авторством: V. G. Babijchuk
Опубліковано: (2009)
Investigations of the causes for damage in a plate heat exchanger from stainless steel AISI 316L in a food industry enterprise
за авторством: L. I. Nyrkova, та інші
Опубліковано: (2024)
за авторством: L. I. Nyrkova, та інші
Опубліковано: (2024)
Behavior of non-metallic inclusions in structure of cast electroslag stainless steel of AISI of 316 type
за авторством: A. A. Polishko, та інші
Опубліковано: (2014)
за авторством: A. A. Polishko, та інші
Опубліковано: (2014)
Prediction of solidification parameters for twin-roll thin strip casting
за авторством: N. I. Tarasevich, та інші
Опубліковано: (2016)
за авторством: N. I. Tarasevich, та інші
Опубліковано: (2016)
Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
за авторством: S. E. Kondratiuk, та інші
Опубліковано: (2016)
за авторством: S. E. Kondratiuk, та інші
Опубліковано: (2016)
Comprehensive comparative evaluation of quality criteria of superthin-wall welded pipes from TR316L steels made under different conditions
за авторством: T. N. Burjak, та інші
Опубліковано: (2015)
за авторством: T. N. Burjak, та інші
Опубліковано: (2015)
Estimation of the real effectiveness of cold-rolled strip flatness control with selectivity emulsion feeding
за авторством: Ju. Prikhodko
Опубліковано: (2013)
за авторством: Ju. Prikhodko
Опубліковано: (2013)
The influence of deformation on material structure and properties under longitudinal cold rolling of stepped shafts
за авторством: M. Kovalik
Опубліковано: (2010)
за авторством: M. Kovalik
Опубліковано: (2010)
Схожі ресурси
-
Specific corrosion behaviour of 316L stainless steel in mineral water
за авторством: J. Capelle, та інші
Опубліковано: (2018) -
Cold rolling improving at the expense of usage degree prediction of reserve plasticity
за авторством: A. G. Prisjazhnyj
Опубліковано: (2014) -
Heat treatment technology for stainless steel 316(L)
за авторством: F. Bahfie, та інші
Опубліковано: (2022) -
The influence of ultrasonic vibration on corrosion resistance of heat exchanger plates made of AISI 316 steel
за авторством: H. S. Vasyliev, та інші
Опубліковано: (2018) -
Simplified Modelling of Tandem Cold Rolling
за авторством: Slimani, K., та інші
Опубліковано: (2018)