Buchumschlag

The total stress intensity factors and phase angles for internal axisymmetric conical cracks in the fiber under tension

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	A. V. Borovik, L. O. Teslenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Modern Problems in Physical Materials Science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000564265
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Local stress intensity factors along the front of the channel cracks at its intersection with the main crack
von: V. G. Borovik
Veröffentlicht: (2011)

Influence of interface yield strength on the SIF for a crack in a fiber and energy absorbed at fiber fracture
von: A. V. Borovik
Veröffentlicht: (2014)

The influence of the curvilinear crack shape on the dynamic stress intensity factors
von: V. S. Kravets
Veröffentlicht: (2014)

Thermal stresses in axisymmetric truncated conical shell with piecewise constant heat transfer coeffitsients
von: A. I. Chyzh
Veröffentlicht: (2018)

The residual stresses effect on stress intensity factors for a surface crack in a rail head
von: H. P. Marchenko
Veröffentlicht: (2010)

Evaluation of the stress intensity factor for transverse shear cracks in a beam specimen
von: P. S. Kun, et al.
Veröffentlicht: (2014)

Effect of channel cracks on fiber&#039;s fracture in one-component material with unidirectional fibrous structure
von: V. G. Borovik
Veröffentlicht: (2016)

Elastoplastic Axisymmetric Stress-Strain State of Thin Shells from Materials with Different Strength to Tension and Compression
von: M. O. Babeshko, et al.
Veröffentlicht: (2021)

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Z. Y. Han, et al.
Veröffentlicht: (2014)

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)

The influence of the counterbody base edges curvature on stress intensity factors in a body with an edge crack
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2014)

Plane Problem on Stress Distribution at Neighborhood of the Crack under Tension of Linearly Strengthening Material
von: L. P. Khoroshun, et al.
Veröffentlicht: (2014)

Axisymmetric torsion problem for elastic space with smooth and acute-angled cuts
von: V. S. Kravets, et al.
Veröffentlicht: (2013)

Stress intensity solutions for cracked plates by the dual boundary method
von: Sahli, A., et al.
Veröffentlicht: (2007)

Engineering approach to determination of stress intensity factor and parameters of growth of axial crack in circumferential weld of pipeline
von: V. V. Kyrychok, et al.
Veröffentlicht: (2017)

Stress intensity factors for an arbitrarily located arc crack in a circular disc under its rotation
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2016)

Effect of optical losses irregularity on wideband fiber Raman amplification for total telecom window in silica fibers
von: G. S. Felinskyi, et al.
Veröffentlicht: (2013)

Effect of optical losses irregularity on wideband fiber Raman amplification for total telecom window in silica fibers
von: Felinskyi, G.S., et al.
Veröffentlicht: (2013)

Stress state of a plane wedge-shaped specimen with an edge crack under uniaxial tension
von: V. S. Kravets
Veröffentlicht: (2017)

Stress State of Orthotropic Electroelastic Medium with Arbitrary Orientated Elliptic Crack under Unilateral Tension
von: V. S. Kyryliuk, et al.
Veröffentlicht: (2021)

Sea Radar Backscattering Intensity for Small Grazing Angles
von: Gutnik, V. G., et al.
Veröffentlicht: (2013)

Anomalous asymptotic of small-angle neutron scattering intensity
von: L. A. Bulavin, et al.
Veröffentlicht: (2015)

Anomalous asymptotic of small-angle neutron scattering intensity
von: L. A. Bulavin, et al.
Veröffentlicht: (2015)

The forecast of total technological energy intensity of ferrous metallurgy products of Ukraine according to the production schemes till 2040
von: H. O. Kuts, et al.
Veröffentlicht: (2021)

Non-Axisymmetric Vibrations of Conical Shells of Variable Thickness under Action of Non-Stationary Load
von: V. F. Mejsh, et al.
Veröffentlicht: (2014)

A sharp angle inequalities for pairs of elliptic operators in the case of domain with a conical point
von: Dzhafarov, R.M.
Veröffentlicht: (1999)

Iterative Method of Determining Stress Intensity Coefficients Under Dynamic Loading of the Crack System
von: Кирилова, О. І., et al.
Veröffentlicht: (2025)

Iterative Method of Determining Stress Intensity Coefficients Under Dynamic Loading of the Crack System
von: Кирилова, О. І., et al.
Veröffentlicht: (2025)

Research on stress intensity factors of elliptical hole in infinite body
von: Baoliang Liu, et al.
Veröffentlicht: (2016)

Ultrasonic effect on phase transformation and tensile flow stress of Zr18Nb alloy under tension
von: B. M. Mordiuk, et al.
Veröffentlicht: (2012)

Relief parameters and angular distribution of light intensity for axisymmetric surface homogenizing structures
von: Antonov, E. E., et al.
Veröffentlicht: (2020)

Relief parameters and angular distribution of light intensity for axisymmetric surface homogenizing structures
von: Ye. Ye. Antonov, et al.
Veröffentlicht: (2020)

On the stress intensity near the tips of interfacial boundary shear cracks at a corner point of the interface
von: V. M. Nazarenko, et al.
Veröffentlicht: (2015)

Axisymmetric problem on the stress state of twice truncated cone
von: N. D. Vajsfeld, et al.
Veröffentlicht: (2013)

Intensity of dynamic stresses of longitudinal shear mode in a periodically-layered composite with penny-shaped cracks
von: V. Z. Stankevych, et al.
Veröffentlicht: (2020)

Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016)

An improved method for determining the total energy intensity of goods for multi-product productions
von: Ye. Maliarenko, et al.
Veröffentlicht: (2021)

On the effect of initial stresses on quasitransversal axisymmetric waves in an incompressible composite
von: Yu. Hlukhov
Veröffentlicht: (2019)

Effect of Tension along the Mode-I Crack in Elastic Body on Forming the Nonlinearity Zone
von: A. A. Kaminskij, et al.
Veröffentlicht: (2015)

Simulation of the plasma jet with a dispersed phase in an axisymmetric chamber
von: Kravchenko, O.Yu., et al.
Veröffentlicht: (2012)