Materials and technological approaches to welding of combined joints between martensitic and austenitic steels used in power machine building (Review)
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | M. O. Nimko, V. Y. Skulskyi, T. V. Ivanenko |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
2023
|
| Назва видання: | Automatic Welding |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001405711 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
-
Formation of deformation martensite in the chromium-nickel austenitic steels
за авторством: H. V. Snizhnoi
Опубліковано: (2011) -
Influence of welding modes on decarburization in the haz of R91 steel in welded joints of dissimilar steels after high-temperature tempering
за авторством: M. O. Nimko, та інші
Опубліковано: (2022) -
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2023) -
Microfractography of tensile tests surfaces of welded joints of austenitic and ferritic steels
за авторством: B. Nasiłowska, та інші
Опубліковано: (2018) -
Effect of carbon on phase composition of weld metal of welded joints of 9% Cr martensitic steel
за авторством: Ju. Skulskij, та інші
Опубліковано: (2009)