Studying the Possibility of Using Coherent Type Nozzles for Bof Blowing at the Gas Dynamic Simulation Stand
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | T. S. Golub, L. S. Molchanov, S. I. Semykin |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2023
|
| Назва видання: | Science and Innovation |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001414436 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
за авторством: S. I. Semykin, та інші
Опубліковано: (2018)
за авторством: S. I. Semykin, та інші
Опубліковано: (2018)
Evaluating the Effi ciency of Using Coherent-Type Nozzles for the Conditions of Additional Postcombustion of CO to CO2 in the Wor king Space of the Oxygen Converter
за авторством: T. S. Golub, та інші
Опубліковано: (2024)
за авторством: T. S. Golub, та інші
Опубліковано: (2024)
Slag formation control during BOF blowing
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2016)
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2016)
High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
за авторством: S. I. Semykin, та інші
Опубліковано: (2019)
за авторством: S. I. Semykin, та інші
Опубліковано: (2019)
High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
за авторством: S. I. Semykin, та інші
Опубліковано: (2018)
за авторством: S. I. Semykin, та інші
Опубліковано: (2018)
Comparative study on a physical model of specific features of top blowing through the tip with folded nozzles when blowing single-phase liquids
за авторством: S. I. Semykin, та інші
Опубліковано: (2020)
за авторством: S. I. Semykin, та інші
Опубліковано: (2020)
Analytical study of the characteristics of streams flowing from nozzles of compound-type construction
за авторством: S. I. Semykin, та інші
Опубліковано: (2022)
за авторством: S. I. Semykin, та інші
Опубліковано: (2022)
High temperature modeling of BOF bath blowing by using three-level oxygen lance
за авторством: A. G. Chernjatevich, та інші
Опубліковано: (2017)
за авторством: A. G. Chernjatevich, та інші
Опубліковано: (2017)
Study by physical simulation of gas jet temperature fields distribution at the nozzle exit
за авторством: S. A. Dudchenko, та інші
Опубліковано: (2012)
за авторством: S. A. Dudchenko, та інші
Опубліковано: (2012)
Research on the physical model of features of the behavior of a two-phase bath at top blowing through a tip with folded nozzles
за авторством: S. I. Semykin, та інші
Опубліковано: (2020)
за авторством: S. I. Semykin, та інші
Опубліковано: (2020)
Research of the influence of low potential on bihavior splashing of liquid when its top blowing by physical simulation
за авторством: S. I. Semykin, та інші
Опубліковано: (2016)
за авторством: S. I. Semykin, та інші
Опубліковано: (2016)
Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
за авторством: S. I. Semykin, та інші
Опубліковано: (2020)
за авторством: S. I. Semykin, та інші
Опубліковано: (2020)
Impact of technological factors on the intensity of wear of BOF lining
за авторством: A. S. Zaspenko, та інші
Опубліковано: (2013)
за авторством: A. S. Zaspenko, та інші
Опубліковано: (2013)
BOF process control
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2014)
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2014)
Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
за авторством: S. I. Semykin, та інші
Опубліковано: (2021)
за авторством: S. I. Semykin, та інші
Опубліковано: (2021)
The study of peculiarities of formation and removal of droplets by blowing one- and two-phase liquids on the model of the LD-Converter
за авторством: S. I. Semykin, та інші
Опубліковано: (2016)
за авторством: S. I. Semykin, та інші
Опубліковано: (2016)
Study of the influence of technology BOF melt on quality steel
за авторством: V. F. Poljakov, та інші
Опубліковано: (2014)
за авторством: V. F. Poljakov, та інші
Опубліковано: (2014)
Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
за авторством: Semykin, S.I., та інші
Опубліковано: (2020)
за авторством: Semykin, S.I., та інші
Опубліковано: (2020)
Arrangement control of BOF melting
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2017)
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2017)
Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
за авторством: A. G. Chernjatevich, та інші
Опубліковано: (2017)
за авторством: A. G. Chernjatevich, та інші
Опубліковано: (2017)
Regulation of the termination of purge in BOF process
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2015)
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2015)
Blowing steel of inert gas in six-strand tundish
за авторством: O. M. Smirnov, та інші
Опубліковано: (2015)
за авторством: O. M. Smirnov, та інші
Опубліковано: (2015)
Features thermal gas-dynamic operation of the blast furnace tuyere zone by blowing into the furnace of pulverized coal and natural gas
за авторством: A. L. Chajka, та інші
Опубліковано: (2015)
за авторством: A. L. Chajka, та інші
Опубліковано: (2015)
Determination of coefficient of correlation between melting parameters and temperature of steel for BOF melting
за авторством: A. A. Semikina, та інші
Опубліковано: (2013)
за авторством: A. A. Semikina, та інші
Опубліковано: (2013)
Industrial researches of features of influence of electric impacts on the number of metal drops in slag at the top oxygen blowing
за авторством: S. I. Semykin, та інші
Опубліковано: (2016)
за авторством: S. I. Semykin, та інші
Опубліковано: (2016)
BOF modelling with mathematical statistics methods using
за авторством: E. A. Sergeeva, та інші
Опубліковано: (2016)
за авторством: E. A. Sergeeva, та інші
Опубліковано: (2016)
Vibration monitoring for BOF pillow-block bearings
за авторством: M. A. Zajtsev, та інші
Опубліковано: (2016)
за авторством: M. A. Zajtsev, та інші
Опубліковано: (2016)
Method of calculation of nozzle sizes in welding with two separate gas flows
за авторством: V. M. Belokon, та інші
Опубліковано: (2012)
за авторством: V. M. Belokon, та інші
Опубліковано: (2012)
The Operational Efficiency of Nozzle Volume in Vertical Gas and Liquid Catalytic Reactors
за авторством: V. S. Pikashov, та інші
Опубліковано: (2012)
за авторством: V. S. Pikashov, та інші
Опубліковано: (2012)
The Operational Efficiency of Nozzle Volume in Vertical Gas and Liquid Catalytic Reactors
за авторством: A. I. Torchinskij, та інші
Опубліковано: (2012)
за авторством: A. I. Torchinskij, та інші
Опубліковано: (2012)
Computer Simulation of Fluid Flow Through a Venturi Nozzle of Different Configurations
за авторством: Yu. Avdieieva, та інші
Опубліковано: (2022)
за авторством: Yu. Avdieieva, та інші
Опубліковано: (2022)
Investigation on physical model of converter process of features of electric potential influence on nature of liquid spraying at top blowing out
за авторством: S. I. Semykin, та інші
Опубліковано: (2015)
за авторством: S. I. Semykin, та інші
Опубліковано: (2015)
Decarburization as the primary parameter of optimal control BOF process
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2014)
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2014)
ДОСЛІДЖЕННЯ НА ГАЗОДИНАМІЧНИХ МОДЕЛЯХ МОЖЛИВОСТІ ВИКОРИСТАННЯ СОПЕЛ КОГЕРЕНТНОГО ТИПУ ДЛЯ ПРОДУВКИ В УМОВАХ КИСНЕВОГО КОНВЕРТЕРА
за авторством: Golub, T., та інші
Опубліковано: (2023)
за авторством: Golub, T., та інші
Опубліковано: (2023)
Influence of the meridional shape of the nozzle cascade on the NOZZLE cascade flow structure
за авторством: Бойко, А. В., та інші
Опубліковано: (2015)
за авторством: Бойко, А. В., та інші
Опубліковано: (2015)
Influence of the meridional shape of the nozzle cascade on the NOZZLE cascade flow structure
за авторством: Бойко, А. В., та інші
Опубліковано: (2015)
за авторством: Бойко, А. В., та інші
Опубліковано: (2015)
Influence of the meridional shape of the nozzle cascade on the NOZZLE cascade flow structure
за авторством: A. V. Bojko, та інші
Опубліковано: (2015)
за авторством: A. V. Bojko, та інші
Опубліковано: (2015)
Simulation results of coherent light in a modified microring resonator
за авторством: Q. L. Tran, та інші
Опубліковано: (2018)
за авторством: Q. L. Tran, та інші
Опубліковано: (2018)
Simulation results of coherent light in a modified microring resonator
за авторством: Q. L. Tran, та інші
Опубліковано: (2018)
за авторством: Q. L. Tran, та інші
Опубліковано: (2018)
Polarization properties of atomic gas in a coherent state
за авторством: Ju. M. Poluektov
Опубліковано: (2011)
за авторством: Ju. M. Poluektov
Опубліковано: (2011)
Схожі ресурси
-
Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
за авторством: S. I. Semykin, та інші
Опубліковано: (2018) -
Evaluating the Effi ciency of Using Coherent-Type Nozzles for the Conditions of Additional Postcombustion of CO to CO2 in the Wor king Space of the Oxygen Converter
за авторством: T. S. Golub, та інші
Опубліковано: (2024) -
Slag formation control during BOF blowing
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2016) -
High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
за авторством: S. I. Semykin, та інші
Опубліковано: (2019) -
High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
за авторством: S. I. Semykin, та інші
Опубліковано: (2018)