Cover Image

Determining the conditions for achieving the plastic mode of diamond grinding of ceramic materials from the standpoint of estimating energy costs during processing

Saved in:

Bibliographic Details
Date:	2023
Main Authors:	V. I. Lavrinenko, V. Y. Solod
Format:	Article
Language:	English
Published:	2023
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001418719
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
by: V. I. Lavrinenko, et al.
Published: (2024)

To the analysis of the estimation of energy costs during diamond-abrasive processing by wheels from superhard materials
by: V. I. Lavrinenko
Published: (2022)

Diamond grinding of ceramic balls with a circular feed
by: S. V. Sokhan, et al.
Published: (2024)

Diamond grinding of ceramic balls with a circular feed
by: S. V. Sokhan, et al.
Published: (2023)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
by: S. V. Sokhan, et al.
Published: (2020)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
by: V. I. Lavrinenko, et al.
Published: (2024)

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance
by: V. I. Lavrinenko, et al.
Published: (2016)

The influence of machining conditions on performance of diamond grinding of silicon carbide ceramic balls
by: S. V. Sokhan, et al.
Published: (2018)

Productivity and specific cost of the internal infeed diamond grinding of hard alloys with periodic electroerosion influences
by: V. V. Gabitov, et al.
Published: (2012)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
by: S. V. Rjabchenko, et al.
Published: (2018)

Development of diamond grinding ribbons on rubber bond
by: V. M. Bychykhin, et al.
Published: (2018)

Grinding of gear wheels by diamond-abrasive wheels
by: S. V. Rjabchenko
Published: (2017)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
by: V. I. Lavrinenko, et al.
Published: (2022)

Specifying the process parameters for diamond dressing of grinding wheels
by: Ya. O. Shakhbazov, et al.
Published: (2019)

Determination of oxides intended for surface modification of diamond grains by their functional characteristics
by: V. I. Lavrinenko, et al.
Published: (2020)

Financial Indicators for Diagnostic of Capital from the Standpoint of Value- and Cost-Based Approaches
by: I. M. Nazarenko
Published: (2016)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
by: A. A. Adamovskij, et al.
Published: (2015)

The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide
by: S. V. Sokhan, et al.
Published: (2020)

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks
by: H. A. Petasiuk, et al.
Published: (2019)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
by: V. I. Lavrinenko
Published: (2019)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
by: V. I. Lavrinenko, et al.
Published: (2016)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
by: V. I. Lavrinenko, et al.
Published: (2013)

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool
by: V. V. Smokvyna, et al.
Published: (2023)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
by: V. I. Lavrinenko, et al.
Published: (2021)

Structural mechanisms of plastic deformation of ceramics
by: G. S. Olejnik
Published: (2014)

Determination of thickness of coated of metalized grinding powders of synthetic diamond based on extrapolation-affine 3D models of grain
by: G. A. Petasjuk, et al.
Published: (2018)

Investigation of changes in physico-mechanical and physical-chemical properties of diamond diamond systems of the Ni-Mn-C system for increasing the operating characteristics of the grinding tool
by: G. D. Ilnitskaja, et al.
Published: (2017)

Determination of the boundaries of plastic zone of metal deformation during the cutting
by: M. O. Kurin
Published: (2020)

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools
by: V. G. Poltoratskij
Published: (2019)

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency
by: V. I. Lavrinenko
Published: (2024)

Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases
by: L. Jaworska, et al.
Published: (2017)

Influence of porosity of tool composite on efficiency of profile diamond grinding of sapphire and zirconium dioxide
by: Ye. O. Pashchenko, et al.
Published: (2020)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
by: V. P. Afanasev, et al.
Published: (2016)

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process
by: P. G. Matjukha, et al.
Published: (2017)

Clusters from the standpoint of institutionalism
by: A. Hrytsenko
Published: (2015)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
by: V. I. Lavrinenko
Published: (2016)

Cost estimation as an economic category
by: D. M. Artemenko
Published: (2019)

CVD diamonds in diamond tools: features and properties, features of processing and application in modern diamond tools (Review)
by: V. I. Lavrinenko
Published: (2022)

The Text and Modernity. Right to Life Standpoint
by: H. V. Shvets
Published: (2013)

Glass dispersion during his grinding and polishing. Mechanism of his removal
by: V. N. Tkach, et al.
Published: (2019)