The influence of the rate of increase in gas pressure during vacuum-compression sintering on the structure and properties of VK6M hard alloy

The influence of the rate of increase in gas pressure during vacuum-compression sintering on the structure and properties of VK6M hard alloy

Gespeichert in:

Bibliographische Detailangaben
Datum:	2023
Hauptverfasser:	M. M. Prokopiv, Yu. P. Ushchapovskyi, O. V. Kharchenko, H. M. Kramar, L. H. Bodrova, H. P. Kysla
Format:	Artikel
Sprache:	English
Veröffentlicht:	2023
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001418741
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The effect of the duration of external uniaxial compression on the density of hard alloys VK20 and VN20 during their final sintering in vacuum
von: V. P. Bondarenko, et al.
Veröffentlicht: (2019)

Nitrogen titanizing of hard alloy VK8
von: M. V. Karpets, et al.
Veröffentlicht: (2009)

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Influence of annealing in vacuum on structure, physical and mechanical properties and performance sustainability instrument sintered in hydrogen from the alloy VK10 om for friction welding with stirring
von: O. V. Kharchenko
Veröffentlicht: (2016)

The influence of making on structure, physical-mechanical and operational properties of alloy VK10 OM
von: M. M. Prokopiv, et al.
Veröffentlicht: (2018)

Thermal recycling VK6M hard alloy wastes when heating by concentrated radiation
von: Pasichnyi, V., et al.
Veröffentlicht: (2016)

The research results of influence conditions of sintering of VN20 (80% WC + 20 % WT. NI) hard alloy in vacuum under external uniaxial static pressure on its shrinkage and density
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Thermal recycling VK6M hard alloy wastes when heating by concentrated radiation
von: V. V. Pasichnyi, et al.
Veröffentlicht: (2016)

The use of the computer modeling for improving operational characteristics of hard-alloy matrices of high-pressure apparatuses intended for sintering diamond-hard alloy plates
von: S. I. Shestakov, et al.
Veröffentlicht: (2017)

The influence of VC and TaS alloying microadditives on the structure and physico-mechanical properties of VK10 hard alloys
von: V. P. Botvynko
Veröffentlicht: (2018)

Producing multilayer coatings from the gas phase with the participation of TiC and TiN compounds on the hard alloy VK8
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2018)

The off mikroadditives of VC, Cr3C2 effekt on the structure and physical and mechanical properties of hard alloy VK6
von: V. P. Botvynko
Veröffentlicht: (2017)

The Mechanism Of Increasing The Efficiency Of Data Compression
von: M. K. Buza
Veröffentlicht: (2016)

Deposition of chromium nitride coatings from vacuum arc plasma in increased nitrogen pressure
von: Ovcharenko, V.D., et al.
Veröffentlicht: (2014)

Titanoaliting of carboloy of VK8 in the closed reactionary space
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2009)

Features of influence of sintering conditions of fine-grained WC–10Co cemented carbide on its structure, physical-mechanical and operational characteristics
von: M. M. Prokopiv, et al.
Veröffentlicht: (2019)

Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: H. V. Filatov
Veröffentlicht: (2021)

Study on PCD tool wear in hard milling of fully-sintered 3Y-TZP ceramics
von: J. Xu, et al.
Veröffentlicht: (2022)

The study of the characteristics of pressing and vacuum sintering of the powder mixture of iron-silicon
von: L. A. Sosnovskij, et al.
Veröffentlicht: (2018)

Production of vacuum-arc high-hard Mo-N coatings
von: A. A. Andreev, et al.
Veröffentlicht: (2011)

Increase of hardness of surfacing of recovery details by economical microalloying
von: V. M. Vlasovets, et al.
Veröffentlicht: (2021)

A new phenomenon in the structure formation of T5K10 hard alloy
von: M. M. Prokopiv
Veröffentlicht: (2018)

Radiation-hard plastic scintillator with increased mechanical strength
von: Zhmurin, P.N., et al.
Veröffentlicht: (2015)

Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
von: A. M. Stepanchuk, et al.
Veröffentlicht: (2018)

Manufacture of stainless steel – aluminium transition pieces using method of pressure welding in vacuum
von: G. K. Kharchenko, et al.
Veröffentlicht: (2012)

Stages of destruction and elastic compression of granular nanoporous carbon medium at high pressures
von: Neklyudov, I.M., et al.
Veröffentlicht: (2015)

INCREASING THE RATE OF GEOTHERMAL WELLS «GEOHYDROLIFT»
von: Morozov, Y.
Veröffentlicht: (2022)

Correspondence I.H. Spaskiy with V.K. Pukhtynskiy
von: S. Zozulia
Veröffentlicht: (2015)

On the role of hydrogen in sintering of titanium powders
von: D. H. Savvakin, et al.
Veröffentlicht: (2011)

Physico-mechanical and physicochemical interaction at sintering of cBN-TiB₂ composites under ultrahigh pressure
von: Garbuz, T.O., et al.
Veröffentlicht: (2007)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
von: Çavdar, U., et al.
Veröffentlicht: (2014)

Influence of high pressure and temperature on the structure and properties of the WC–6 Co hard alloy
von: I. V. Andreiev, et al.
Veröffentlicht: (2018)

About the possibility of brazing of niobium to alumina VK94-1 ceramics by copper and copper-nickel brazing fillers without applying pressure
von: V. S. Zhuravlev
Veröffentlicht: (2015)

A new ceramic material with a gradient structure obtained from an exothermic mixture of ZrO2-Al-C in contact with a eutectic mixture 68Al2O3–32ZO2 in the process of free sintering
von: M. M. Prokopiv, et al.
Veröffentlicht: (2022)

Effects of sintering temperature and addition of Fe and B₄C on hardness and wear resistance of diamond reinforced metal matrix composites
von: Şimşir, M., et al.
Veröffentlicht: (2013)

TiN crystal structure features in cBN—TiN—Al composite sintered at high pressures and temperatures
von: N. M. Biliavyna, et al.
Veröffentlicht: (2022)

High-temperature hardness of multilayer metal–metal nitride vacuum-arc coatings
von: V. F. Horban, et al.
Veröffentlicht: (2021)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
von: U. Зavdar, et al.
Veröffentlicht: (2014)

To the Anniversary of a Person and a Teacher. V.K. Mikheev
von: V. V. Koloda
Veröffentlicht: (2007)

Impact of nitrogen pressure on mechanical properties and thermal stability of tialsin coatings fabricated by vacuum-arc deposition
von: V. A. Bilous, et al.
Veröffentlicht: (2012)