Research on the structure and properties of high temperature and high pressure composite PCBN tool materials
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | Mo Peicheng, Chen Jiarong, Chen Chao, Hu Qiaofan, Xiao Leyin, Lin Feng, Pan Xiaoyi |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2023
|
| Назва видання: | Superhard Materials |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001418751 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Effect of temperature on sintering of PCBN with Ti–Si3N4–AIN–Y2O3 additives
за авторством: Mo Peicheng, та інші
Опубліковано: (2021)
за авторством: Mo Peicheng, та інші
Опубліковано: (2021)
Synthesis and performance study of polycrystalline cubic boron nitride using WC–B4C–Al2O3 as the binder
за авторством: Peicheng Mo, та інші
Опубліковано: (2022)
за авторством: Peicheng Mo, та інші
Опубліковано: (2022)
Synthesis of TiC0.5–Al and effect of sintering temperature on mechanical properties of PcBN composites
за авторством: Hu Xixi, та інші
Опубліковано: (2023)
за авторством: Hu Xixi, та інші
Опубліковано: (2023)
Evaluation of diamond-coated tools in drilling high-strength CFRP composites
за авторством: J. Xu, та інші
Опубліковано: (2022)
за авторством: J. Xu, та інші
Опубліковано: (2022)
Two-layer pcbn composites for use in a tool
за авторством: M. P. Bezhenar, та інші
Опубліковано: (2018)
за авторством: M. P. Bezhenar, та інші
Опубліковано: (2018)
Promising types of coatings for PCBN tools
за авторством: A. S. Manokhin, та інші
Опубліковано: (2018)
за авторством: A. S. Manokhin, та інші
Опубліковано: (2018)
High-speed machining of martensitic stainless steel using PcBN
за авторством: K. Sobiyi, та інші
Опубліковано: (2016)
за авторством: K. Sobiyi, та інші
Опубліковано: (2016)
Effect of high-temperature heating on properties of steels in brazing of composite high-pressure stop valve bodies
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2012)
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2012)
The effect of high pressures and high temperatures on the properties of aluminum nitride
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2015)
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2015)
Microstructures and properties of Fe–Co–Cu pre-alloyed powder for geological diamond bits
за авторством: D. Xie, та інші
Опубліковано: (2019)
за авторством: D. Xie, та інші
Опубліковано: (2019)
Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
за авторством: D. Xie, та інші
Опубліковано: (2018)
за авторством: D. Xie, та інші
Опубліковано: (2018)
Interface effect and thermodynamic behavior between diamond grit and Fe‒Co‒Cu pre-alloyed powders
за авторством: D. Xie, та інші
Опубліковано: (2021)
за авторством: D. Xie, та інші
Опубліковано: (2021)
Wear intensity of the PcBN tools with nanolayered protective coating
за авторством: A. S. Manokhin, та інші
Опубліковано: (2020)
за авторством: A. S. Manokhin, та інші
Опубліковано: (2020)
Pressure effects on formation strukture and properties of superhard PcBN materials
за авторством: M. P. Bezhenar, та інші
Опубліковано: (2017)
за авторством: M. P. Bezhenar, та інші
Опубліковано: (2017)
Equation of state for ε-iron at high pressures and temperatures
за авторством: Belonoshko, A.B.
Опубліковано: (2010)
за авторством: Belonoshko, A.B.
Опубліковано: (2010)
Pressure and high-temperature superconductivity of hydrogen com-pounds
за авторством: Ju. I. Bojko, та інші
Опубліковано: (2020)
за авторством: Ju. I. Bojko, та інші
Опубліковано: (2020)
High-pressure behaviors of carbon nanotubes
за авторством: Z. S. Zhao, та інші
Опубліковано: (2012)
за авторством: Z. S. Zhao, та інші
Опубліковано: (2012)
Effect of high pressure and temperature on phase transformations of multilayer graphene
за авторством: A. A. Shulzhenko, та інші
Опубліковано: (2016)
за авторством: A. A. Shulzhenko, та інші
Опубліковано: (2016)
Strengthening of the directly reinforced composite at high temperature
за авторством: P. I. Loboda, та інші
Опубліковано: (2010)
за авторством: P. I. Loboda, та інші
Опубліковано: (2010)
Obtaining superhard composites of the BL group in the cBN(Al)–SiB4—WC system under high pressure and high temperature conditions
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2019)
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2019)
Sintering of superhard instrumen talpurpose composites of the BL group in the cBN—NbC—Al system under high pressure and high temperature conditions
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020)
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020)
Effect of temperature and pressure to pinning centers in bulk MgB2 under high pressure
за авторством: A. Kozyrev
Опубліковано: (2014)
за авторством: A. Kozyrev
Опубліковано: (2014)
Obtaining superhard composites in the system Cdiam—SiB4—WC under conditions of high pressures and temperatures
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2019)
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2019)
Review of modern instrumentation for magnetic measurements at high pressure and low temperature
за авторством: X. Wang, та інші
Опубліковано: (2014)
за авторством: X. Wang, та інші
Опубліковано: (2014)
Crystal structure of aluminum diborides synthesized under high pressures and temperatures
за авторством: D. A. Stratijchuk, та інші
Опубліковано: (2012)
за авторством: D. A. Stratijchuk, та інші
Опубліковано: (2012)
Phase transformations of n-layer graphenes into diamond at high pressures and temperatures
за авторством: A. A. Shulzhenko, та інші
Опубліковано: (2017)
за авторством: A. A. Shulzhenko, та інші
Опубліковано: (2017)
Modeling of temperature fields in the growth volume of the high-pressure cell of the cix-punches high pressure apparatus in growing of diamond crystals by T-gradient method
за авторством: T. S. Panasiuk, та інші
Опубліковано: (2017)
за авторством: T. S. Panasiuk, та інші
Опубліковано: (2017)
Micro-Raman study of CNx composites subjected to high pressure treatment
за авторством: Klyui, N.I., та інші
Опубліковано: (1999)
за авторством: Klyui, N.I., та інші
Опубліковано: (1999)
TiN crystal structure features in cBN—TiN—Al composite sintered at high pressures and temperatures
за авторством: N. M. Biliavyna, та інші
Опубліковано: (2022)
за авторством: N. M. Biliavyna, та інші
Опубліковано: (2022)
The physical-mechanical and damping properties PCBN superhard composite depending on the conditions for their preparation
за авторством: M. P. Bezhenar, та інші
Опубліковано: (2016)
за авторством: M. P. Bezhenar, та інші
Опубліковано: (2016)
Ferromagnetic nanoclusters in Si:Mn and GaMnAs annealed at high temperature–pressure
за авторством: Bak-Misiuk, J., та інші
Опубліковано: (2009)
за авторством: Bak-Misiuk, J., та інші
Опубліковано: (2009)
Growth of structurally perfect diamond single crystals at high pressures and temperatures. Review
за авторством: V. V. Lysakovskij, та інші
Опубліковано: (2018)
за авторством: V. V. Lysakovskij, та інші
Опубліковано: (2018)
Ferromagnetic nanoclusters in Si:Mn and GaMnAs annealed at high temperature-pressure
за авторством: J. Bak-Misiuk, та інші
Опубліковано: (2009)
за авторством: J. Bak-Misiuk, та інші
Опубліковано: (2009)
Resistance of graphite materials under high pressure and high temterature
за авторством: O. V. Savitskyi, та інші
Опубліковано: (2019)
за авторством: O. V. Savitskyi, та інші
Опубліковано: (2019)
High pressure densification of Cu-based powder composite materials in solid phase
за авторством: O. I. Tolochyn
Опубліковано: (2011)
за авторством: O. I. Tolochyn
Опубліковано: (2011)
Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
за авторством: E. M. Lutsak, та інші
Опубліковано: (2017)
за авторством: E. M. Lutsak, та інші
Опубліковано: (2017)
Experimental investigation and finite modeling of the process of intermittent cutting of AISI 52100 steel with PcBN tool
за авторством: Li Xin, та інші
Опубліковано: (2023)
за авторством: Li Xin, та інші
Опубліковано: (2023)
Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
за авторством: V. M. Bushlja, та інші
Опубліковано: (2014)
за авторством: V. M. Bushlja, та інші
Опубліковано: (2014)
Influence of high pressure and temperature on the structure and properties of the WC–6 Co hard alloy
за авторством: I. V. Andreiev, та інші
Опубліковано: (2018)
за авторством: I. V. Andreiev, та інші
Опубліковано: (2018)
Polaron Rashba effect in an asymmetric quantum dot
за авторством: Shu-Ping Shan, та інші
Опубліковано: (2014)
за авторством: Shu-Ping Shan, та інші
Опубліковано: (2014)
Схожі ресурси
-
Effect of temperature on sintering of PCBN with Ti–Si3N4–AIN–Y2O3 additives
за авторством: Mo Peicheng, та інші
Опубліковано: (2021) -
Synthesis and performance study of polycrystalline cubic boron nitride using WC–B4C–Al2O3 as the binder
за авторством: Peicheng Mo, та інші
Опубліковано: (2022) -
Synthesis of TiC0.5–Al and effect of sintering temperature on mechanical properties of PcBN composites
за авторством: Hu Xixi, та інші
Опубліковано: (2023) -
Evaluation of diamond-coated tools in drilling high-strength CFRP composites
за авторством: J. Xu, та інші
Опубліковано: (2022) -
Two-layer pcbn composites for use in a tool
за авторством: M. P. Bezhenar, та інші
Опубліковано: (2018)