Buchumschlag

Obtaining Cast Reinforced Structures by Liquid Phase Combination of System Components

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	I. A. Shalevska, D. I. Musbakh
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001129986
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Casting reinforcement by lost-foam casting technology
von: P. B. Kaliuzhnyi, et al.
Veröffentlicht: (2017)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
von: Paustovsky, A.V., et al.
Veröffentlicht: (2019)

Obtaining heterostructures with quantium dots for sensors by using liquid phase epitaxy
von: Maronchuk, I.E., et al.
Veröffentlicht: (2004)

Investigation of the Process of Obtaining Polystyrene Models with Macro-reinforcement Elements
von: V. A. Sljusarev, et al.
Veröffentlicht: (2018)

Flash butt welding of reinforcing rods of A400S–A600S grades in construction of cast-in-situ reinforced concrete structures
von: P. N. Chvertko
Veröffentlicht: (2010)

Reinforcing phases, structure and properties of modified welds of low-alloyed steels
von: V. V. Golovko, et al.
Veröffentlicht: (2016)

Rational casting technologies of the economically reinforced matrix-aluminum composite preforms
von: A. S. Zatulovskij, et al.
Veröffentlicht: (2015)

Obtaining Castings in Low-pressure Casting Using Multiple Metal Wires
von: T. V. Lysenko, et al.
Veröffentlicht: (2020)

Magnetic control of phase-structural state of the steel castings
von: Yu. V. Moiseiev, et al.
Veröffentlicht: (2009)

Design principles of flask equipment for accelerated cooling of castings obtained by casting in vacuumized moulds
von: P. B. Kaljuzhnyj, et al.
Veröffentlicht: (2015)

Using Computer Simulation to Identify Defects Formation in Steel Castings of Shut-off Valves Casted with Lost Foam Process
von: I. A. Shalevska, et al.
Veröffentlicht: (2021)

Intensification of solidification processes for large iron-carbon alloy castings during Lost-foam process
von: I. A. Shalevskaja, et al.
Veröffentlicht: (2015)

Features of Structure Formation and Mechanical Properties of Ductile Cast Iron in Castings Obtained by Casting in Shell Molds Using &quot;In-mold&quot; Process
von: V. B. Bublikov, et al.
Veröffentlicht: (2019)

Structure formation of cast steels using granular components of the charge
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2013)

Ladle and In-mold Modification Methods for Obtaining Castings from Cast Irons with Various Graphite Morphology
von: E. V. Zakharchenko, et al.
Veröffentlicht: (2019)

Ladle and In-mold Modification Methods for Obtaining Castings from Cast Irons with Various Graphite Morphology
von: Zakharchenko, E.V., et al.
Veröffentlicht: (2019)

p-n junctions obtained in (Ge₂)x(GaAs)₁₋x varizone solid solutions by liquid phase epitaxy
von: Sapaev, B., et al.
Veröffentlicht: (2005)

The features of phase equilibrium in the system Al-Si with microheterogeneous liquid phase
von: A. V. Mazur, et al.
Veröffentlicht: (2017)

Influence of modification on the characteristics of reinforcing steels intended for reinforced concrete structures
von: S. O. Polishko
Veröffentlicht: (2023)

Structure and properties of Ti – Al – V cast titanium alloys obtained by electron-beam melting
von: M. M. Voron, et al.
Veröffentlicht: (2015)

Modeling of thermoelastoplastic deformation of reinforced plates. I. Structural model of the reinforced medium
von: A. P. Yankovskii
Veröffentlicht: (2021)

The structure and properties of sintered titanium blanks obtained by using phase transition
von: P. I. Loboda, et al.
Veröffentlicht: (2011)

Allowable internal pressure in the hollow combined cylindrical castings
von: V. F. Mazorchuk, et al.
Veröffentlicht: (2017)

The Statistical Analysis of Structure of the Metal Condensates Obtained by a Sputtering at Phase Equilibrium
von: A. I. Olemskoj, et al.
Veröffentlicht: (2012)

Structures of single-phase convertors units for combined electrical supply systems with photoelectric solar panels
von: A. A. Shavelkin
Veröffentlicht: (2018)

Modeling of continuous casting by combined process of MCCB + ESR
von: L. B. Medovar, et al.
Veröffentlicht: (2017)

Combination of Electro- and Radiochemical Processes for Hydrogen and Oxygen Obtaining
von: V. V. Solovei, et al.
Veröffentlicht: (2023)

Combination of Electro- and Radiochemical Processes for Hydrogen and Oxygen Obtaining
von: Соловей, В. В., et al.
Veröffentlicht: (2024)

Combination of Electro- and Radiochemical Processes for Hydrogen and Oxygen Obtaining
von: Соловей, В. В., et al.
Veröffentlicht: (2024)

Complex refining of cast iron containing slag by liquid soda
von: P. A. Plokhikh, et al.
Veröffentlicht: (2014)

Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: H. V. Filatov
Veröffentlicht: (2021)

Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: Filatov, Heorhii V.
Veröffentlicht: (2021)

Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: Filatov, Heorhii V.
Veröffentlicht: (2021)

Electromagnetic power of magnetic system stirrer liquid metal in the mold of continuous casting machine
von: T. V. Vishtak, et al.
Veröffentlicht: (2013)

Isothermal hardening of iron-carbon alloys combined with their casting
von: V. S. Doroshenko, et al.
Veröffentlicht: (2024)

Complex Technology of Obtaining Qualitative Castings of Machine-Building and Metallurgical Purpose
von: V. A. Krivosheev, et al.
Veröffentlicht: (2019)

Optimization techniques to obtain the best combination of alloy strength and toughness
von: G. M. Zrazhevskij, et al.
Veröffentlicht: (2016)

Regularities of formation of a phase-structural state of the condensates obtained by ion sputtering
von: A. P. Shpak, et al.
Veröffentlicht: (2008)

On a liquid-solid zone in solidified casting
von: F. M. Kotljarskij
Veröffentlicht: (2018)

Gating system for the production of iron castings with a differentiated structure and properties on the modification of the base liquid iron directly in the mold
von: M. A. Fesenko, et al.
Veröffentlicht: (2018)