Buchumschlag

Examples of Manufacturing Cast Parts for Wind Power Plants and Prospects for the Application of this LGM Process

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
1. Verfasser:	V. S. Doroshenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001130309
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: B. P. Taran, et al.
Veröffentlicht: (2013)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: Таран, Борис Петрович, et al.
Veröffentlicht: (2014)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: Таран, Борис Петрович, et al.
Veröffentlicht: (2014)

Overview of the Production of Casting Machines in the World and Examples of the Use of Robots in Casting Processes
von: V. A. Hnatush, et al.
Veröffentlicht: (2019)

EFFICIENCY OF OFFSHORE WIND POWER PLANTS
von: Nechai, I.
Veröffentlicht: (2023)

Mineral stone casting - progressive scientific and technical direction of foundry manufacture
von: V. S. Doroshenko
Veröffentlicht: (2018)

Features of the Technological Process of Manufacturing Two-layer Cast Iron Castings with Differentiated Properties
von: I. V. Lukjanenko
Veröffentlicht: (2019)

The Digital Twin and Optimization of Cast Metal Structures in Additive Manufacturing
von: Doroshenko, V.S., et al.
Veröffentlicht: (2020)

The Digital Twin and Optimization of Cast Metal Structures in Additive Manufacturing
von: V. S. Doroshenko, et al.
Veröffentlicht: (2020)

THEORETICAL POWER CHARACTERISTICS OF THE SECONDARY WIND TURBINE OF A WIND POWER PLANT WITH AERODYNAMIC MULTIPLICATION
von: Alekseevskiy , D., et al.
Veröffentlicht: (2025)

Adaptive model of frequency and power control in power systems with wind power plants
von: M. M. Kulyk, et al.
Veröffentlicht: (2018)

Adaptive model of frequency and power control in power systems with wind power plants
von: Kulyk М.M., et al.
Veröffentlicht: (2018)

Some issues of wind-diesel power plants production
von: A. M. Donets, et al.
Veröffentlicht: (2014)

Features load capacity assessment of power transformers in the wind power plants
von: S. V. Kazanskyi, et al.
Veröffentlicht: (2017)

PROBABILISTIC FORECASTING METHODS FOR WIND PLANTS CURRENT POWER
von: Uzheyko, S.
Veröffentlicht: (2018)

Probabilistic forecasting methods for wind plants current power
von: S. O. Uzheiko
Veröffentlicht: (2018)

Modeling common work for wind and solar power plants
von: M. M. Kuznetsov
Veröffentlicht: (2016)

Features load capacity assessment of power transformers in the wind power plants
von: Kazanskiy, S., et al.
Veröffentlicht: (2017)

3D-technologies of the casting making as examples of additive production
von: V. S. Doroshenko
Veröffentlicht: (2014)

Computer modeling of transient electromechanical processes in a wind power plant with a magnetic gearbox
von: V. V. Grebenikov, et al.
Veröffentlicht: (2024)

Retrospective Models of Wind Power Plants and Solar Power Plants in the Problems of Planning the Models of Electric Power Systems
von: Ye. Saukh, et al.
Veröffentlicht: (2020)

Prospects of expansion of magnetodynamic devices application in casting technologies
von: V. N. Fikssen
Veröffentlicht: (2015)

On the receipt of Austempering cast iron from cast state at Lost Foam Casting Process
von: V. S. Doroshenko
Veröffentlicht: (2017)

Problems and prospects of development of meat processing manufacturings in Ukraine
von: S. O. Ishchuk
Veröffentlicht: (2019)

Mathematical Modeling of Processes of Frequency and Power Automatic Control in the Interconnected Power System (IPS) with Dispersed Wind Power Plant and Generators-Regulators
von: Dryomin I.V.
Veröffentlicht: (2014)

Ukrainian power grid state-of the-art and possible wind power plants impact
von: M. P. Kuznetsov, et al.
Veröffentlicht: (2014)

Modernization of process control of manufacturing magnesium disks to install low-pressure casting
von: T. V. Lysenko, et al.
Veröffentlicht: (2014)

Investigation of the operating modes of integrated power systems with powerful wind power plants and accumulator batteries
von: M. M. Kulyk, et al.
Veröffentlicht: (2018)

Investigation of the operating modes of integrated power systems with powerful wind power plants and accumulator batteries
von: Kulyk М.M., et al.
Veröffentlicht: (2018)

POTENTIAL OF UKRAINE'S WIND POWER PLANTS REASSESSMENT. THE REASONS AND THE RESULTS
von: Kudria, S., et al.
Veröffentlicht: (2020)

Problems with designing and building wind power plants in the Subcarpathian region
von: J. Krużel, et al.
Veröffentlicht: (2013)

MODELING THE OPERATION OF A HYDRO–ACCUMULATING POWER PLANT IN THE PUMP MODE AT POWER SUPPLY FROM THE WIND POWER PLANT
von: Verbovij, А.
Veröffentlicht: (2019)

Modeling the operation of a hydro–accumulating power plant in the pump mode at power supply from the wind power plant
von: A. P. Verbovyi
Veröffentlicht: (2019)

ANALYSIS OF THE INVESTMENT ATTRACTIVENESS OF CERTAIN CAPACITY SEGMENTS OF SMALL POWER WIND POWER PLANTS
von: Kokhanievich, V. P., et al.
Veröffentlicht: (2023)

Influence of dead band and speed of the regulator on frequency stabilization process in power system with powerful wind power plants and battery energy storage systems
von: O. V. Zhurovets
Veröffentlicht: (2018)

Influence of dead band and speed of the regulator on frequency stabilization process in power system with powerful wind power plants and battery energy storage systems
von: Zgurovets O.V.
Veröffentlicht: (2018)

Prospects and problems of development of Integrated Power System of Ukraine in the conditions of its connection to the power system of the European Union and hypertrophied use in its composition of wind and solar power plants
von: M. M. Kulyk, et al.
Veröffentlicht: (2019)

Prospects and problems of development of Integrated Power System of Ukraine in the conditions of its connection to the power system of the European Union and hypertrophied use in its composition of wind and solar power plants
von: Kulyk М.M., et al.
Veröffentlicht: (2019)

Monitoring and control parameters in the manufacture of polystyrene casting models
von: I. A. Shalevskaja, et al.
Veröffentlicht: (2015)

Features of operating modes analysis of the power system in areas with alternative electric power sources (wind power plants)
von: S. P. Denysiuk, et al.
Veröffentlicht: (2022)