Buchumschlag

Improvement of crack resistance of banded support rolls at high-speed surfacing with low energy input

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	S. V. Shchetynin, V. I. Shchetynina, S. P. Desiatskyi
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001132983
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Improvement of increasing crack resistance of banded supporting rolls at high-speed surfacing with low heat input
von: S. V. Shchetinin
Veröffentlicht: (2016)

Improvement of crack-resistance of banded support rolls in high-speed deposition
von: V. V. Chigarev, et al.
Veröffentlicht: (2009)

Profiling bypass rolls for improving the flatness of the bands at the cold rolling
von: V. A. Nikolaev, et al.
Veröffentlicht: (2009)

Improvement of weld resistance against formation of crystalline cracks in ESW repair of bands of kiln rotary furnaces
von: S. M. Kozulin, et al.
Veröffentlicht: (2010)

The accuracy of rolling thickness adjustment in conditions of high-frequency disturbances taking into account the speed of roll setting devices
von: Yu. Potap, et al.
Veröffentlicht: (2022)

Definition of speed limits continuous high-speed rolling of wire of a various diameter at use reducucing-calibration of the block
von: A. A. Gorbanev, et al.
Veröffentlicht: (2015)

Secondary hardness and heat resistance of high-speed steels
von: O. V. Movchan, et al.
Veröffentlicht: (2020)

Methods of improving the structure and properties of high-speed steels
von: O. V. Movchan, et al.
Veröffentlicht: (2023)

Spray deposition High-speed steel with low tungsten content
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2015)

Influence of photon generation on the low-energy electron band-reflection
von: Tikhonenkov, I.E.
Veröffentlicht: (1999)

Features of high-frequency energy input in a flow of metal plasma
von: V. M. Beresnev, et al.
Veröffentlicht: (2005)

Coefficient of crystallization speed twin-roll casting steel and aluminium
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2013)

Effect of low-frequency resonance oscillations on structure and crack resistance of deposited high-chromium cast iron
von: Ju. N. Tjurin, et al.
Veröffentlicht: (2011)

Corrosion-resistant coatings based on polymer-bitumen composition with high speed of formation
von: V. A. Chervatiuk, et al.
Veröffentlicht: (2013)

Prediction of the Conditions for the Formation of a Thin Strip of High-Strength Aluminum Alloys, Depending on the Speed of Casting Rolls and Technological Parameters
von: M. I. Tarasevych, et al.
Veröffentlicht: (2020)

Metallurgical methods of improving hydrogen brittleness and crack resistance of heat- resistant nickel alloy
von: O. I. Balytskyi, et al.
Veröffentlicht: (2017)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)

Multilayer structures of high crack resistance, formed by explosion welding
von: R. P. Didyk, et al.
Veröffentlicht: (2015)

Anomalous resistivity and superconductivity in the two-band Hubbard model with one narrow band
von: Yu. Kagan, et al.
Veröffentlicht: (2011)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

Improvement of the input current waveforms of a matrix converter under unbalanced and/or nonsinusoidal input voltage conditions
von: V. M. Mykhalskyi, et al.
Veröffentlicht: (2015)

Construction of mm-band and cm-band radiometers based on satellite low noise blocks
von: I. M. Mytsenko, et al.
Veröffentlicht: (2016)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: E. N. Berdnikova
Veröffentlicht: (2013)

Influence of dead band and speed of the regulator on frequency stabilization process in power system with powerful wind power plants and battery energy storage systems
von: O. V. Zhurovets
Veröffentlicht: (2018)

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency
von: V. I. Lavrinenko
Veröffentlicht: (2024)

Artificial Intelligence Improving Functional Stability Board Information and Control Systems of High-Speed Vehicles
von: V. R. Kosenko
Veröffentlicht: (2014)

A SIMPLE METHOD FOR IMPROVING OUT-OF-BAND HIGH-FREQUENCY STABILITY OF RADIO FREQUENCY AMPLIFIERS
von: Khristenko, A. D.
Veröffentlicht: (2023)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
von: Jaworski, J., et al.
Veröffentlicht: (2016)

Low-temperature fatigue crack growth resistance of degraded B95 aluminium alloys
von: I. M. Andreiko, et al.
Veröffentlicht: (2012)

MONITORING OF ELECTRICAL ENERGY QUALITY ON THE TRACTION SUBSTATION INPUT
von: Gryb, O. G., et al.
Veröffentlicht: (2015)

Automated systems for protection of rolling stands equipment from overloads and rolling process information support
von: G. G. Grabovskij, et al.
Veröffentlicht: (2015)

Unified structure of the precision high-speed energy system and resource-saving automatic control and regulation
von: Канюк, Г. И., et al.
Veröffentlicht: (2016)

Unified structure of the precision high-speed energy system and resource-saving automatic control and regulation
von: Канюк, Г. И., et al.
Veröffentlicht: (2016)

Unified structure of the precision high-speed energy system and resource-saving automatic control and regulation
von: G. I. Kanjuk, et al.
Veröffentlicht: (2016)

The optical absorption spectra and band gap energies investigation for highly ordered thin films of dihydrodibenzotetraazaannulene
von: V. H. Udovytskyi
Veröffentlicht: (2009)

Problems of molten steel pouring at a low speed
von: A. K. Tsykulenko, et al.
Veröffentlicht: (2009)

Structural criteria of strength and crack resistance of high-strength steels and their welded joints
von: O. M. Berdnikova
Veröffentlicht: (2021)

Methods of power factor corrector input current spectrum improvement
von: V. V. Rohal, et al.
Veröffentlicht: (2015)