Buchumschlag

The influence of introducing refractory compounds into the weld pool on the weld metal dendritic structure

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	V. V. Holovko, Yu. Yermolenko, S. M. Stepaniuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001132992
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of introduction of refractory particles to welding pool on structure and properties of weld metal
von: V. V. Holovko, et al.
Veröffentlicht: (2020)

Direct numerical modeling of dendritic structure formation in weld metal with dispersed refractory inoculants
von: Ju. Ermolenko, et al.
Veröffentlicht: (2016)

Possibilities of nanomodification of dendrite structure of weld metal
von: V. V. Golovko
Veröffentlicht: (2018)

Dispersion modification of dendritic structure of weld metal
von: V. V. Golovko, et al.
Veröffentlicht: (2019)

Influence of conditions of welding pool protection by argon on
von: V. P. Prylutskyi, et al.
Veröffentlicht: (2021)

Control of weld metal properties by adjustment of oxidation level of weld pool in shielded-gas welding
von: S. T. Rimskij
Veröffentlicht: (2011)

Effect of weld pool geometry on structure of weld metal of heat-resistant nickel alloy single crystals
von: K. A. Jushchenko, et al.
Veröffentlicht: (2013)

Computation and experimental evaluation of formation of primary structure in weld metal with refractory inoculants
von: Ju. Ermolenko, et al.
Veröffentlicht: (2017)

Modeling of chemical composition of pool metal in arc methods of welding
von: V. V. Golovko, et al.
Veröffentlicht: (2016)

Controller of viscosity melts agglomerated welding flux by based formation refractory of compounds
von: I. A. Goncharov, et al.
Veröffentlicht: (2013)

Modeling of weld pool behavior in spot welding by pulsed laser emission
von: A. P. Semenov, et al.
Veröffentlicht: (2014)

Effect of titanium carbides on the formation of microstructure and improvement of mechanical characteristics of the weld metal
von: I. K. Pokhodnia, et al.
Veröffentlicht: (2018)

Nature of distribution of non-metallic inclusions in structural components of weld metal while using arc welding methods
von: V. V. Holovko
Veröffentlicht: (2020)

To the issue of modeling the structure of transverse magnetic field in the area of welding pool
von: A. D. Razmyshljaev, et al.
Veröffentlicht: (2018)

Wear-resistant surfacing with feeding of nanooxides to weld pool
von: V. D. Kuznetsov
Veröffentlicht: (2015)

Features of the influence of grain boundaries during δ-γ-transformation on the formation of welds metal structure (Review)
von: V. V. Holovko
Veröffentlicht: (2022)

Welding of austenite stainless steel using high-power laser beam and electromagnetic control of weld pool
von: M. Bakhmann, et al.
Veröffentlicht: (2014)

Computer modeling of optimal control of weld pool position during root joints MIG/MAG welding
von: V. V. Dolinenko, et al.
Veröffentlicht: (2016)

Regularities formation the structure and properties of the films of refractory compounds
von: A. V. Agulov, et al.
Veröffentlicht: (2014)

Electric conductivity of slag pool in electroslag welding with wire electrode
von: Ju. N. Lankin, et al.
Veröffentlicht: (2009)

Risk identification in fabrication of welded structures in order to introduce risk-management at the enterprise
von: Yu. K. Bondarenko, et al.
Veröffentlicht: (2018)

The influence of titanium containing inoculates on structure of low-alloy high-strength steel weld metals
von: H. M. Hryhorenko, et al.
Veröffentlicht: (2020)

Influence of parameters of ultrasonic mechanical oscillations on the structure and mechanical properties of weld metal in laser welding of ferritic steels
von: V. V. Somonov
Veröffentlicht: (2017)

The influence of structure on the mechanical properties of weld metal in welded joints of Al–Cu–Li aluminium alloys
von: L. I. Markashova, et al.
Veröffentlicht: (2013)

Influence of inoculants on the features of weld structure formation in low-alloyed steels (Review)
von: V. V. Holovko
Veröffentlicht: (2022)

Coatings obtained by deposition of refractory compounds from flows of vacuum-arc metallical plasma
von: V. M. Beresnev, et al.
Veröffentlicht: (2003)

Evaluation of shape and sizes of weld pool in surfacing using combined strip electrode
von: V. N. Matvienko, et al.
Veröffentlicht: (2015)

Influence of pulsed-arc welding modes on the structure and mechanical properties of welds and haz metal of welded joints of 30KH2N2MDF steel
von: O. A. Haivoronskyi, et al.
Veröffentlicht: (2022)

Influence of the nature of distribution of non-metallic inclusions on the mechanical properties of weld metal of low-alloy steels
von: V. V. Holovko, et al.
Veröffentlicht: (2023)

Detonation coatings based on TiAl intermetallics with additions of non-metallic refractory compounds
von: A. L. Borysova, et al.
Veröffentlicht: (2023)

Methodology of determination of induction of controlled magnetic field in pool zone during arc welding
von: A. D. Razmyshljaev, et al.
Veröffentlicht: (2018)

Structure and properties of weld metal modified by nanooxides
von: V. D. Kuznetsov, et al.
Veröffentlicht: (2015)

Calculated-experimental model of distribution of non-metallic inclusions in the metal of welds by sizes
von: L. A. Taraborkin, et al.
Veröffentlicht: (2021)

The influence of external electromagnetic field on welded joints structure during underwater welding
von: O. M. Berdnikova, et al.
Veröffentlicht: (2021)

Influence of metal structure of pipes on mechanical properties of flash-butt welded joints
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2017)

Effect of yttrium on redistribution of hydrogen and weld metal structure in welding of high-strength steels
von: I. K. Pokhodnja, et al.
Veröffentlicht: (2010)

Fractal evaluation of grain boundaries branching in the structure of weld metal of low-alloy steels
von: V. V. Holovko, et al.
Veröffentlicht: (2023)

Optimization of chemical composition and structure of metal of repair welds in remedy of defects in welded joints of pipes by using multilayer welding
von: A. A. Rybakov, et al.
Veröffentlicht: (2013)

Processes of nonconsumable electrode welding with welding current modulation (Review). Part 1. Peculiarities of burning of non-stationary arcs with refractory cathode
von: U. Boi, et al.
Veröffentlicht: (2019)

Influence of stress-strain state on the structure and properties of joints in diffusion welding of dissimilar metals
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2014)