HP-HT sintering of cBN based materials with ZrC and Al
Gespeichert in:
| Datum: | 2020 |
|---|---|
| Hauptverfasser: | K. V. Slipchenko, D. A. Stratiichuk, V. Z. Turkevych, N. M. Biliavyna, V. M. Bushlia, Ya.-E. Shtol |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2020
|
| Schriftenreihe: | Superhard Materials |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0001153683 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
HP-HT sintering, microstructure, and properties of B6O and TiC-containing composites based on cBN
von: D. V. Turkevich, et al.
Veröffentlicht: (2015)
von: D. V. Turkevich, et al.
Veröffentlicht: (2015)
Sintering of cBN based materials with TaC binder for cutting tool application
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)
Sintering of superhard cBN-based materials with Ti4WC5
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
Thermobaric sintering of cBN-Cr3C2 composite
von: K. V. Slipchenko, et al.
Veröffentlicht: (2017)
von: K. V. Slipchenko, et al.
Veröffentlicht: (2017)
Sintering of superhard instrumen talpurpose composites of the BL group in the cBN—NbC—Al system under high pressure and high temperature conditions
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
The influence of VC–Al additive on wear resistance of cBN-based composites
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)
TiN crystal structure features in cBN—TiN—Al composite sintered at high pressures and temperatures
von: N. M. Biliavyna, et al.
Veröffentlicht: (2022)
von: N. M. Biliavyna, et al.
Veröffentlicht: (2022)
Obtaining superhard composites of the BL group in the cBN(Al)–SiB4—WC system under high pressure and high temperature conditions
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2019)
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2019)
Electrical characteristics of thermobaric sintered cBN–NbN composite
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2020)
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2020)
cBN based materials with TiN-Al binder phase: sintering, structure, properties
von: K. V. Slipchenko, et al.
Veröffentlicht: (2019)
von: K. V. Slipchenko, et al.
Veröffentlicht: (2019)
Solid phase interaction of TiC with ZrC or ZrN under mechanochemical synthesis and HPHT powder
von: N. M. Biliavyna, et al.
Veröffentlicht: (2022)
von: N. M. Biliavyna, et al.
Veröffentlicht: (2022)
The creation of ceramic matrix composites of the BL group based on cBN and hightemperature hafnium or molybdenum carbides
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
Formation of multicomponent solid solutions in cBN—TiC— VN —Al system at high pressure composite sintering
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)
The influence of VC-Al additive content on structure and phase composition of cBN based superhard materials
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)
Formation of superhard com posites of the BL group in the cBN—Ti —WC—(Al) system under the HPHT-conditions
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)
Preventive action of silicon nitride at HT-HP sintering of cubic boron nitride
von: I. A. Petrusha, et al.
Veröffentlicht: (2015)
von: I. A. Petrusha, et al.
Veröffentlicht: (2015)
Structural changes of vanadium nitride under the conditions of thermobaric sintering in the cBN-VN-Al ceramic composite
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)
Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
von: Ya. M. Romanenko, et al.
Veröffentlicht: (2017)
von: Ya. M. Romanenko, et al.
Veröffentlicht: (2017)
Features of the formation of the composite structure of cBN-TiC-Al system
von: M. P. Bezhenar, et al.
Veröffentlicht: (2019)
von: M. P. Bezhenar, et al.
Veröffentlicht: (2019)
Electrical resistance of the islet film of gold on the surface of thermobarically sintered cBN-ceramics
von: I. P. Fesenko, et al.
Veröffentlicht: (2021)
von: I. P. Fesenko, et al.
Veröffentlicht: (2021)
Моделювання пористої і зеренної структур при двостадійному спіканні надтвердих PCBN систем cBN – Al, cBN – TiB2 (TiN) – Al
von: Коновал, С.М., et al.
Veröffentlicht: (2008)
von: Коновал, С.М., et al.
Veröffentlicht: (2008)
Thermal stability of powdery TiC, ZrC, Cr3C2 and WC on air
von: V. G. Kudin
Veröffentlicht: (2014)
von: V. G. Kudin
Veröffentlicht: (2014)
Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)
Extreme HT-HP conditions for activation of noticeable oxygen diffusion in GaN
von: B. Sadovyi, et al.
Veröffentlicht: (2017)
von: B. Sadovyi, et al.
Veröffentlicht: (2017)
Dynamic tensile strength of ceramic-matrix composites of the BL group, which are obtained in the cBN–carbide–Al systems
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2024)
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2024)
Кристалічна структура ZrB2 у полікристалах і композитах системи cBN-ZrN-Al, отриманих при високому тиску
von: Гарбуз, Т.О., et al.
Veröffentlicht: (2009)
von: Гарбуз, Т.О., et al.
Veröffentlicht: (2009)
Multilayer periodic compositions of ZrC/Mg for a wavelength of 30.4 nm
von: L. E. Konotopskij, et al.
Veröffentlicht: (2015)
von: L. E. Konotopskij, et al.
Veröffentlicht: (2015)
The influence of SiC and Al2O3 whiskers on the properties of whisker-reinforced cBN-based composites
von: Ju. Ju. Rumjantseva, et al.
Veröffentlicht: (2019)
von: Ju. Ju. Rumjantseva, et al.
Veröffentlicht: (2019)
cBN–Cu composite: production method and physical properties
von: M. V. Nikishina
Veröffentlicht: (2012)
von: M. V. Nikishina
Veröffentlicht: (2012)
Твердофазна взаємодія TiC з ZrC або ZrN в умовах механохімічного синтезу та HPHT спікання
von: Білявина, Н.М., et al.
Veröffentlicht: (2022)
von: Білявина, Н.М., et al.
Veröffentlicht: (2022)
HP-HT treatment of hexagonal boron nitride for higher photocatalytic degradation of organic pollutants
von: Cui Liang, et al.
Veröffentlicht: (2023)
von: Cui Liang, et al.
Veröffentlicht: (2023)
Многослойные периодические композиции ZrC/Mg для длины волны 30,4 нм
von: Конотопский, Л.Е., et al.
Veröffentlicht: (2015)
von: Конотопский, Л.Е., et al.
Veröffentlicht: (2015)
An increase of operating characteristics of cBN cutters by improving their damping properties
von: L. N. Devin, et al.
Veröffentlicht: (2012)
von: L. N. Devin, et al.
Veröffentlicht: (2012)
Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)
von: V. K. Starkov, et al.
Veröffentlicht: (2014)
Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)
von: V. K. Starkov, et al.
Veröffentlicht: (2014)
ВПЛИВ ДОБАВКИ VC-Al НА СТРУКТУРУ ТА ФАЗОВИЙ СКЛАД НАДТВЕРДИХ МАТЕРІАЛІВ НА ОСНОВІ cBN
von: Сліпченко, К. В., et al.
Veröffentlicht: (2018)
von: Сліпченко, К. В., et al.
Veröffentlicht: (2018)
СПІКАННЯ, ФІЗИКО-ТЕХНІЧНІ ХАРАКТЕРИСТИКИ ТА ДТА-ТГ АНАЛІЗ КАРБІДОВМІСНИХ КОМПОЗИТІВ, ОТРИМАНИХ В СИСТЕМАХ cBN-MeCх-(Al) де Me- Ti, Zr, V, Cr, Ta
von: Стратійчук, Д. А., et al.
Veröffentlicht: (2020)
von: Стратійчук, Д. А., et al.
Veröffentlicht: (2020)
Вплив спікання в умовах високих температур і тиску та механохімічного синтезу на кристалічну структуру монокарбідів TiC, ZrC, HfC
von: Білявина, Н.М., et al.
Veröffentlicht: (2023)
von: Білявина, Н.М., et al.
Veröffentlicht: (2023)
Особенности кристаллической структуры диборида титана, образующегося в сверхтвердых композитах системы cBN—Al—TiB2
von: Беженар, Н.П., et al.
Veröffentlicht: (2008)
von: Беженар, Н.П., et al.
Veröffentlicht: (2008)
Synthesis of TiC0.5–Al and effect of sintering temperature on mechanical properties of PcBN composites
von: Hu Xixi, et al.
Veröffentlicht: (2023)
von: Hu Xixi, et al.
Veröffentlicht: (2023)
Ähnliche Einträge
-
HP-HT sintering, microstructure, and properties of B6O and TiC-containing composites based on cBN
von: D. V. Turkevich, et al.
Veröffentlicht: (2015) -
Sintering of cBN based materials with TaC binder for cutting tool application
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020) -
Sintering of superhard cBN-based materials with Ti4WC5
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020) -
Thermobaric sintering of cBN-Cr3C2 composite
von: K. V. Slipchenko, et al.
Veröffentlicht: (2017) -
Sintering of superhard instrumen talpurpose composites of the BL group in the cBN—NbC—Al system under high pressure and high temperature conditions
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)