Buchumschlag

Influence of the parameters of the process of plasma-arc spheroidization of current-conducting wire from low-carbon steel on the granulometric composition of the produced powders

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	D. V. Strohonov, V. M. Korzhyk, I. Tszianlun, Yu. Tunik, O. M. Burlachenko, A. O. Aloshyn
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001351855
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Effectiveness of the process of plasma-arc spheroidization of current-conducting titanium wire
von: V. M. Korzhyk, et al.
Veröffentlicht: (2023)

Peculiarities of the microstructure and properties of iron aluminide powders obtained by the method of plasma-arc spheroidization
von: L. I. Adeeva, et al.
Veröffentlicht: (2024)

Peculiarities of metallurgical processes in plasma-arc spraying of coatings produced from steel wire with powder fillers WC and WC–Co
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Control of granulometric composition of powders applied in manufacture of welding consumables
von: Z. A. Sidlin
Veröffentlicht: (2017)

Influence of accompanying compressing air flow on the coating structure and properties in plasma-arc spraying by consumable current-conducting wire
von: V. M. Korzhyk, et al.
Veröffentlicht: (2022)

Electric arc spraying of intermetalic Fe–Al coatings using different solid and powder wires
von: Yu. S. Borysov, et al.
Veröffentlicht: (2021)

Arc brazing of low-carbon steels
von: V. F. Khorunov, et al.
Veröffentlicht: (2013)

Features of the structure of plasma-arc coatings produced at application of flux-cored wires with a steel sheath and fller from 84C and ZR02 nanopowder
von: G. M. Grigorenko, et al.
Veröffentlicht: (2017)

Application of complexly-alloyed powders, produced by the method of thermocentrifugal spraying, in flux-cored wires
von: A. P. Zhudra, et al.
Veröffentlicht: (2014)

Abrasive wear resistance of alloyed electric arc sprayed coatings from powder wires
von: V. M. Hvozdetskyi
Veröffentlicht: (2018)

Exploration of the obtaining process of fluorophlogopite melt by electric arc melting for the production of massive cast corrosion-resistant products for non-ferrous metallurgy
von: V. M. Korzhyk, et al.
Veröffentlicht: (2022)

Changing of the granulometric composition and hydrophilic of activated carbon after ultrasound irradiation in precavitational regime
von: I. M. Bordun, et al.
Veröffentlicht: (2014)

Submerged-arc surfacing of higt-alloy steels by flux-cored wires
von: J.-M. Bonnel, et al.
Veröffentlicht: (2019)

Features of metallurgical interaction at surfacing a titanium plate with a spray-deposited layer by steel wire
von: V. M. Korzhyk, et al.
Veröffentlicht: (2020)

Granulometrical composition of the waste of thermal power plants
von: H. O. Shevchenko, et al.
Veröffentlicht: (2023)

Multiple-wire submerged arc welding of high-strength fine-grained steels
von: S. Gook, et al.
Veröffentlicht: (2022)

Two-wire submerged-arc welding with cold wire application
von: L. Y. Fainberh, et al.
Veröffentlicht: (2022)

State-of the-art of developments and application of flux-cored wires for welding carbon and low-alloy steels
von: V. N. Shlepakov, et al.
Veröffentlicht: (2010)

Development of flux-cored wire for arc welding of high-strength steels of bainite class
von: V. N. Shlepakov, et al.
Veröffentlicht: (2011)

Friction welding of heat-resistant steel, produced by the powder injection moulding technology, with steel 40X
von: I. V. Zjakhor, et al.
Veröffentlicht: (2012)

Improvement of chemmotological properties of diesel fuel by micro-addition of carbon spheroidal nanoparicles
von: Ye. V. Polunkin, et al.
Veröffentlicht: (2020)

The Specific Features of Manufacturing Corrosion-Resistant Fluorophlogopite Products by Electric Arc Melting with the Use of Carbide Powder Modifiers in Conditions of SmallScale Production
von: V. O. Shcheretskyi, et al.
Veröffentlicht: (2023)

Selection of the optimum composition for low-carbon wire rod
von: A. S. Kozachjok, et al.
Veröffentlicht: (2012)

Development of flux-cored wire of ferrite grade for hardfacing of parts of high-carbon steels
von: Ja. P. Chernjak
Veröffentlicht: (2013)

Optimization of chromium content in powder wires Fe–Cr–C, Fe–Cr–B by corrosion resistance of electric arc coatings
von: T. R. Stupnytskyi, et al.
Veröffentlicht: (2016)

On the peculiarities of electrical conductivity in ARC plasma containing stainless steel and tungsten
von: Porytskyy, P.V.
Veröffentlicht: (2018)

Structure and properties of the wear-resistant coatings fused on steel with flux cored wires by an electric arc method
von: V. E. Gromov, et al.
Veröffentlicht: (2014)

Features of concentration dependence of load-carrying performance of spheroidal carbonic nanoclusters ethanol solutions
von: V. S. Piljavskij, et al.
Veröffentlicht: (2019)

Application of plasma-powder and electric arc coatings to increase tribocorrosion resistance of steels in aggressive environment
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2020)

Substantiation of parameters for bimodal granulometric composition of structured suspension solid phase
von: E. V. Semenenko, et al.
Veröffentlicht: (2017)

Detonation coatings of intermetallic powders of Fe–Al system produced using mechanical alloying
von: Ju. S. Borisov, et al.
Veröffentlicht: (2017)

Physical and mechanical properties and structure of boron containing powder steels with high carbon contents
von: S. H. Napara-Volhina, et al.
Veröffentlicht: (2009)

Detonation coatings of ferromolybdenum-silicon carbide composite powder produced by the method of mechanical-chemical synthesis
von: Ju. S. Borisov, et al.
Veröffentlicht: (2014)

Influence of surface-active substances on phase formation in the process of producing powders of Al–Cu–Fe system for thermal coatings using method of mechanic chemical synthesis
von: A. N. Burlachenko, et al.
Veröffentlicht: (2012)

Heating and fusion of wire-anode in plasma-arc spraying
von: Ju. Kharlamov, et al.
Veröffentlicht: (2011)

Experimental investigation of process of plasma-arc wire spraying
von: I. P. Guljaev, et al.
Veröffentlicht: (2015)

Peculiarities of structure of coatings of Fe–Cr–Al system flux-cored wire produced under the conditions of supersonic electric arc metallization
von: V. N. Korzhik, et al.
Veröffentlicht: (2014)

Corrosion resistance of prestressing steel wires
von: M. I. Hredil, et al.
Veröffentlicht: (2014)

Corrosion resistance of prestressing steel wires
von: Hredil, М.І., et al.
Veröffentlicht: (2014)

Control of steel flux granulometric characteristics in the finished-product warehouses of the PJSC &quot;Dokuchaievsk flux-dolomite works&quot;
von: V. V. Kustov
Veröffentlicht: (2014)