Buchumschlag

Influence of technological parameters of SLM-process on porosity of metal products

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	S. V. Adzhamskyi, H. A. Kononenko, R. V. Podolskyi
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001169546
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Improving the efficiency of the SLM-process by adjusting the focal spot diameter of the laser beam
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Application of SLM-technology for manufacture of dental implants from Ti – 6Al – 4V alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

The influence of time interval between application of layers by SLM-technology on the structure and properties of INCONEL 718 alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Studying the Influence of Orientation and Layer Thickness on the Physico-Mechanical Properties of Co-Cr-Mo Alloy Manufactured by the SLM Method
von: S. Adjamskiy, et al.
Veröffentlicht: (2022)

Influence of heat treatment of specimens from Ti6Al4V manufactured by the technology of selective laser melting on structure and mechanical properties
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2022)

Influence of porosity and size of pores on the electrical resistance of coal
von: E. P. Feldman, et al.
Veröffentlicht: (2010)

Influence of technological parameters of the cold striping process on the productivity of two-stand reversible mills
von: Ja. D. Vasilev, et al.
Veröffentlicht: (2019)

Influence of porosity on erosion behavior and hydrogen permeability of tungsten films
von: G. P. Glazunov, et al.
Veröffentlicht: (2006)

Influence of porosity on erosion behavior and hydrogen permeability of tungsten films
von: Glazunov, G.P., et al.
Veröffentlicht: (2006)

Influence of technological parameters on metal density at large ingots manufacturing
von: M. V. Efimov, et al.
Veröffentlicht: (2017)

Physical and chemical factors influencing the porosity of apatite-biopolymer composites
von: L. F. Sukhodub, et al.
Veröffentlicht: (2022)

The influence of porosity of plasma-electrolytic coating on corrosion resistance of D16 alloy
von: M. M. Student, et al.
Veröffentlicht: (2018)

Condensation-dependent porosity in film nanostructures
von: Cheremskoy, P.G., et al.
Veröffentlicht: (2005)

Development of chemical composition and improvement of production technology to improve operational reliability and durability of rail metal products
von: O. I. Babachenko, et al.
Veröffentlicht: (2019)

Porosity and bioactivity of hydroxyapatite-glass composites
von: Skorokhod, V.V., et al.
Veröffentlicht: (2006)

Influence of porosity of tool composite on efficiency of profile diamond grinding of sapphire and zirconium dioxide
von: Ye. O. Pashchenko, et al.
Veröffentlicht: (2020)

The transformation of carbonic sandstone porosity of the Donbas
von: Y. V. Antipovich
Veröffentlicht: (2014)

Effect of slag consumption in ESR on metal composition and process technological parameters
von: L. A. Lisova, et al.
Veröffentlicht: (2017)

Influence of thermal strengthening technology on variability of mechanical properties of rolled metal product
von: E. V. Parusov, et al.
Veröffentlicht: (2020)

The influence of deposition technological process parameters on surface properties of multilayer coatings
von: Zykova, A., et al.
Veröffentlicht: (2009)

Study of the Material Quality of Samples Obtained by Selective Laser Melting (SLM) Method from IN718 Alloy Powder
von: V. V. Klochykhin, et al.
Veröffentlicht: (2021)

Features of the Gas Regime of the Form and Hydrogen Porosity of the Castings During the Filling Process
von: F. M. Kotliarskyi
Veröffentlicht: (2021)

The influence of porosity in an epoxy matrix–polyvinyl alcohol–disperse filler system on impact toughness
von: P. D. Stukhliak, et al.
Veröffentlicht: (2010)

The Influence of Technological Baking Process Parameters on Quality of Carbon and Graphite Blanks
von: I. V. Pulinets
Veröffentlicht: (2012)

Energy parameters of technology metallurgical production
von: V. I. Bolshakov, et al.
Veröffentlicht: (2014)

Determination of optimal technological parameters by processing of press-powders of aromatic polyamides in products
von: O. S. Kabat, et al.
Veröffentlicht: (2017)

Methods for determining closed porosity in clastic grains of rocks
von: Ya. V. Antipovych
Veröffentlicht: (2018)

Management by the technological process of heat treatment of metal on the basis of design of his entry parameters
von: Yu. Shevchenko, et al.
Veröffentlicht: (2017)

Development production technologies of metal products – pledge of competitive companies
von: A. S. Zaspenko, et al.
Veröffentlicht: (2014)

The improvement of diamond tool production technology on the basis of modeling of metal distribution during metal-composite layers electroforming process
von: Yu. Ushchapovskyi, et al.
Veröffentlicht: (2017)

Study of the hierarchical structure of coals by pressing. Measuring of the total porosity
von: T. A. Vasilenko, et al.
Veröffentlicht: (2015)

Technology of processing metal chips (Review)
von: O. V. Veretilnyk, et al.
Veröffentlicht: (2020)

Effects of porosity in a model of corrosion and passive layer growth
von: F.D.A. Aarão Reis
Veröffentlicht: (2017)

The estimation method to determine the influence of the factors in hot-rolled metal production technology on the stability of the mechanical properties
von: S. A. Vorobej, et al.
Veröffentlicht: (2017)

Comparative study of mechanical properties of 316L steel samples made on the ALFA-150 machine in compliance with world analogues
von: H. A. Kononenko, et al.
Veröffentlicht: (2022)

Analysis of technological development of finish metal product treatment
von: Postizhenko, V.K.
Veröffentlicht: (2008)

Influence of Conditions of Low-Alloy Bainite Grade Steel Cooling on the Dendritic Structure Parameters and Sphericity of Granular Bainite
von: O. I. Babachenko, et al.
Veröffentlicht: (2024)

Regularities of coal and sandstone absolute porosity changes in Donetsk coal basin
von: Ja. V. Antipovich
Veröffentlicht: (2017)

Influence of electric parameters of flux-cored wire arc surfacing on process stability and base metal penetration
von: Ju. N. Lankin, et al.
Veröffentlicht: (2014)

Porosity and packing features of nano- and micro-particles of carbon and silica adsorbents
von: V. M. Gun'ko
Veröffentlicht: (2023)