Buchumschlag

Features of the structure and properties of metal layers deposited with pre-application of titanium and boron carbides

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	V. V. Peremitko, I. V. Kolomoiets, V. I. Sukhomlyn
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001352614
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
von: I. V. Plyushchay, et al.
Veröffentlicht: (2020)

Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
von: I. V. Pliushchai, et al.
Veröffentlicht: (2020)

Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2016)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2021)

Deposition of boron carbide coatings by gas-phase method
von: Yu. Zhuravlov, et al.
Veröffentlicht: (2019)

Gas-phase deposition of cavitation-resistant coatings based on boron carbide
von: Yu. Zhuravlov, et al.
Veröffentlicht: (2018)

Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
von: Ya. Z. Aygьzer, et al.
Veröffentlicht: (2021)

Structure and topography of titanium alloys surface after thermal-diffusion saturation from boron carbide in vacuum
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2010)

Low-temperature synthesis of boron carbide ceramics
von: Ye. V. Solodkyi, et al.
Veröffentlicht: (2018)

Effect of preliminary application of alloying powders on change of structure and hardness of deposited metal
von: V. V. Peremitko, et al.
Veröffentlicht: (2019)

Boron Carbides of Alkali and Alkali-Earth Metals as Possible Hydrogen Storages. Hydrogen Solubility
von: Z. A. Matysina, et al.
Veröffentlicht: (2013)

Properties of nickel powder alloys with titanium carbide strengthening
von: T. S. Cherepova, et al.
Veröffentlicht: (2016)

Boron, aluminum, nitrogen, oxygen impurities in silicon carbide
von: Vlaskina, S.I., et al.
Veröffentlicht: (2007)

Initiation of a plastic flow in boron carbide at nanoindentation
von: S. N. Dub, et al.
Veröffentlicht: (2015)

Location of Al and Si atoms in substituted boron carbide
von: V. V. Garbuz, et al.
Veröffentlicht: (2023)

Influence of ultradispersed carbides in flux-cored wires on the properties of heat-resistant deposited metal
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2009)

Influence of boron doping on the photosensitivity of cubic silicon carbide
von: V. N. Rodionov, et al.
Veröffentlicht: (2019)

Peculiarities of formation of wear-resistant titanium carbide coatings by the method of electrophoretic deposition
von: H. A. Bahliuk, et al.
Veröffentlicht: (2015)

A study of the influence of the plasticizers on the process of formation of boron carbide
von: V. S. Panov, et al.
Veröffentlicht: (2016)

Effect of titanium carbides on the formation of microstructure and improvement of mechanical characteristics of the weld metal
von: I. K. Pokhodnia, et al.
Veröffentlicht: (2018)

Erosion-resistant multi-layer coatings on base of carbide and titanium nitride with ductile interlayers
von: E. V. Dabizha, et al.
Veröffentlicht: (2010)

On melting of B4C boron carbide under pressure
von: V. A. Mukhanov, et al.
Veröffentlicht: (2012)

Structure of titanium carbide hard metals obtained by electric discharge synthesis methods
von: E. V. Lipjan, et al.
Veröffentlicht: (2019)

Effect of alloying charge and external magnetic field on structure and properties of deposited metal
von: V. V. Peremitko, et al.
Veröffentlicht: (2018)

Influence of microalloying with boron on the structure and properties of deposited metal of the type of tool steel 25Kh5FMS
von: A. A. Babinets, et al.
Veröffentlicht: (2022)

Modifying of deposited metal of grey cast iron type using boron
von: Ju. Krivchikov
Veröffentlicht: (2012)

Arc surfacing of layers of metal of varying composition and hardness
von: V. V. Peremitko, et al.
Veröffentlicht: (2017)

Intermetallics of titanium. Peculiar features, properties, application (Review)
von: S. G. Grigorenko, et al.
Veröffentlicht: (2017)

Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
von: V. S. Urbanovich, et al.
Veröffentlicht: (2018)

Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
von: Yu. O. Shyshkina, et al.
Veröffentlicht: (2018)

Structure and properties of titanium alloy, alloyed with boron, produced by the method of electron beam remelting
von: G. M. Grigorenko, et al.
Veröffentlicht: (2016)

Features of metallurgical interaction at surfacing a titanium plate with a spray-deposited layer by steel wire
von: V. M. Korzhyk, et al.
Veröffentlicht: (2020)

Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)

Removal of inclusions of titanium carbide TiC in electron beam melting of titanium
von: S. V. Akhonin, et al.
Veröffentlicht: (2012)

Influence of abrasive mass fractional composition on deposited metal wear resistance
von: V. V. Peremitko, et al.
Veröffentlicht: (2015)

Effect of mechanical activation on the structure and properties of Cr3C2 reinforced steels with the addition of boron carbide
von: R. V. Jakovenko
Veröffentlicht: (2015)

Reinforcement of material based on the cubic boron nitride by the help of silicon carbide whiskers
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2018)

Kinetics of disintegration of titanium and zirconium nanofilms deposited onto silicon carbide and aluminium nitride as result of annealing them in vacuum
von: Yu. V. Naidich, et al.
Veröffentlicht: (2016)

The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

Diffusion chromoaluminizing 12X18H10T steel with a pre-formed layer of titanium nitride
von: M. V. Arshuk, et al.
Veröffentlicht: (2011)