Buchumschlag

Magnetic pulse welding of copper rings with steel parts with the use of single-turn inductor

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	M. Polieshchuk, I. Matveiev, V. Bovkun, Ya. Selekh, A. Tunik, O. Cherkashyn, L. Kysterska, K. Sekerskyi
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001353506
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Use of magnetic pulse welding for joining plates from similar and dissimilar alloys
von: M. A. Polieshchuk, et al.
Veröffentlicht: (2020)

RESEARCH INTO ELECTROMAGNETIC PROCESSES IN A COMBINED CYLINDRICAL-TYPE MATCHING DEVICE WITH A MASSIVE SINGLE-TURN INDUCTOR
von: Trunova, I. S.
Veröffentlicht: (2013)

Electromagnetic processes in an inductor system with a single thin round turn with a cut above a thin metal sheet
von: Gnatov, A. V.
Veröffentlicht: (2012)

Modernization of technology of submerged arc welding of copper with steel
von: V. N. Koleda
Veröffentlicht: (2012)

Magnetic forces and currents of the inductor for magnetic-pulse processing of of welding joints of non-magnetic thin sheet metals
von: A. P. Rashchepkin, et al.
Veröffentlicht: (2020)

Investigation of temperature state of copper plate in the weld zone at friction STIR welding
von: M. A. Polieshchuk, et al.
Veröffentlicht: (2021)

Effect of pulsed current on activation of plate surfaces being welded of dissimilar metals (steel 20 + copper M1)
von: L. I. Markashova, et al.
Veröffentlicht: (2016)

Fields of application of magnetic-pulse welding (Review)
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2012)

Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)

Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)

Application of pulse technologies in the welding of structural steels
von: A. M. Zhernosekov, et al.
Veröffentlicht: (2013)

Influence of winding ends on the parameters of pulse inductor with U-shaped core
von: R. S. Kryshchuk
Veröffentlicht: (2020)

Electromagnetic field of W-shaped inductor for magnetic-pulse processing of materials
von: A. P. Rashchepkin, et al.
Veröffentlicht: (2019)

Pulsed electrodynamic forces in a multi-current forever cylindrical inductor
von: A. P. Rashchepkin
Veröffentlicht: (2018)

AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
von: Gnatov, A. V.
Veröffentlicht: (2013)

Investigation of processes and selection of parameters for pulse boost converter with auto-transformer inductor
von: Yu. V. Rudenko, et al.
Veröffentlicht: (2018)

Electromagnetic parameters of the inductor for excitation of current pulses in the processes of electroplastic deformation of metals
von: A. P. Rashchepkin
Veröffentlicht: (2019)

Diffusion welding of steel to tin bronze through porous interlayers of nickel and copper
von: A. I. Ustinov, et al.
Veröffentlicht: (2015)

Threshold cylindrical inductor with ferromagnetic core for pulse current processing of flat rolling of metals
von: A. P. Rashchepkin
Veröffentlicht: (2020)

Research of electromagnetic field for u-shaped inductor in the magnetic-pulse processing of nonmagnetic metals
von: R. S. Kryshchuk
Veröffentlicht: (2020)

Inductors for heat treatment of welded butt joints of railway and tram grooved rails
von: Ye. O. Panteleimonov
Veröffentlicht: (2022)

Nanocomposite materials based on powder copper for the electrodes of resistance spot welding galvanized steels
von: E. P. Shalunov, et al.
Veröffentlicht: (2016)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

THE EXCITED LOADS OF ATTRACTION IN A SYMMETRICAL INDUCTOR SYSTEM FOR THE MAGNETIC PULSE REMOVING OF THE BODY CAR
von: Gnatov, A. V.
Veröffentlicht: (2015)

Investigation of electron cut-off in a cylindrical electrode system in pulsed magnetic field of an inductor
von: Drozd, I., et al.
Veröffentlicht: (2018)

Development of inductors for bulk and surface heat treatment of welded butt joints of railway rails
von: O. S. Prokofiev, et al.
Veröffentlicht: (2020)

Effect of basic additives on formation of cracks in welding of copper-nickel alloys and surfacing of monel on steel
von: V. A. Anoshin, et al.
Veröffentlicht: (2018)

Influence of pulsed-arc welding conditions on change of parameters of weld and haz of welded joints and mechanical properties of lowalloy steels
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

ELECTROMECHANICAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH A MOVABLE INDUCTOR AND TWO ARMATURES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

Strengthening of welded structures of 25KHGNMT steel by pulsed barrier discharge treatment
von: L. M. Lobanov, et al.
Veröffentlicht: (2022)

On Excluding the Turn-on in the Case of Failure of Sensor in the System of Control of Lateral Movement of Quadrocopter
von: V. B. Larin, et al.
Veröffentlicht: (2020)

Manufacture of coaxial copper-aluminium tubular parts by using explosion welding and drawing
von: A. G. Bryzgalin, et al.
Veröffentlicht: (2015)

Features of structure formation and properties of joints of S460M steel, made by pulsed-arc welding
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)

Effect of parameters of pulse-arc welding on the formation of weld metal and microstructure of heat-affected-zone of 09G2S steel
von: Yu. Maksymov, et al.
Veröffentlicht: (2022)

Investigation of the adiabatic potential relief in single crystals with copper ions
von: V. A. Shapovalov, et al.
Veröffentlicht: (2014)

Resistance welding of shape-memory copper—aluminium alloy
von: B. E. Paton, et al.
Veröffentlicht: (2015)

Influence of pulsed-arc welding modes on the structure and mechanical properties of welds and haz metal of welded joints of 30KH2N2MDF steel
von: O. A. Haivoronskyi, et al.
Veröffentlicht: (2022)

Nanostructured microlaminates copper-steel: preparation and mechanical properties
von: I. M. Nekliudov, et al.
Veröffentlicht: (2011)

Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)