New opportunities to determine the rate of wear of materials at friction by the indentation data
Збережено в:
| Дата: | 2020 |
|---|---|
| Автори: | Yu. V. Milman, B. M. Mordyuk, K. E. Grinkevych, S. I. Chugunova, I. V. Goncharova, A. I. Lukyanov, D. A. Lesyk |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2020
|
| Назва видання: | Progress in Physics of Metals |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001189899 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Plasticity of materials determined by the indentation method
за авторством: Yu. V. Milman, та інші
Опубліковано: (2018)
за авторством: Yu. V. Milman, та інші
Опубліковано: (2018)
Plasticity of materials determined by the indentation method
за авторством: Milman, Yu.V., та інші
Опубліковано: (2018)
за авторством: Milman, Yu.V., та інші
Опубліковано: (2018)
Procedure of the multiple indentations for determination of the hardness parameters of structurally heterogeneous materials
за авторством: V. I. Kushch, та інші
Опубліковано: (2015)
за авторством: V. I. Kushch, та інші
Опубліковано: (2015)
Procedure of the multiple indentations for determination of the hardness parameters of structurally heterogeneous materials
за авторством: M. V. Karpets, та інші
Опубліковано: (2015)
за авторством: M. V. Karpets, та інші
Опубліковано: (2015)
Evaluation of materials nanohardness by the spheroconical indenter
за авторством: V. I. Moshchenok, та інші
Опубліковано: (2017)
за авторством: V. I. Moshchenok, та інші
Опубліковано: (2017)
Influence of molibdenium under the hightemperature friction of titatium materials on wear
за авторством: A. M. Petrova, та інші
Опубліковано: (2011)
за авторством: A. M. Petrova, та інші
Опубліковано: (2011)
Influence of molibdenium under the hightemperature friction of titatium materials on wear
за авторством: Petrova, А.М., та інші
Опубліковано: (2011)
за авторством: Petrova, А.М., та інші
Опубліковано: (2011)
Improved core model of indentation and its application to measure diamond hardness
за авторством: B. A. Galanov, та інші
Опубліковано: (2016)
за авторством: B. A. Galanov, та інші
Опубліковано: (2016)
The influence of hydrogen on friction and wear of metals (Review)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
Influence of hydrogen on wear resistance of material in a friction pair of braking device
за авторством: M. V. Kindrachuk, та інші
Опубліковано: (2017)
за авторством: M. V. Kindrachuk, та інші
Опубліковано: (2017)
The effect of the indentation load on the results of measuring hardness of superhard materials
за авторством: M. G. Loshak, та інші
Опубліковано: (2012)
за авторством: M. G. Loshak, та інші
Опубліковано: (2012)
Modern Polymer Composites for Friction and Wear Applications
за авторством: K. Friedrich, та інші
Опубліковано: (2012)
за авторством: K. Friedrich, та інші
Опубліковано: (2012)
Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool
за авторством: O. P. Vynohradova, та інші
Опубліковано: (2024)
за авторством: O. P. Vynohradova, та інші
Опубліковано: (2024)
Organic thermoelectric materials: new opportunities
за авторством: A. I. Casian, та інші
Опубліковано: (2013)
за авторством: A. I. Casian, та інші
Опубліковано: (2013)
Extended characterization of materials based on continuous instrumented indentation diagrams
за авторством: B. A. Galanov, та інші
Опубліковано: (2021)
за авторством: B. A. Galanov, та інші
Опубліковано: (2021)
Dominance of multicomponents and multiayer coverages on friction processes and wear
за авторством: V. M. Beresnev
Опубліковано: (2004)
за авторством: V. M. Beresnev
Опубліковано: (2004)
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
за авторством: Wei, Y.H., та інші
Опубліковано: (2019)
за авторством: Wei, Y.H., та інші
Опубліковано: (2019)
Regularities of wear of metal polymer friction couples under influence of tribocurrents
за авторством: S. I. Kryshtopa, та інші
Опубліковано: (2019)
за авторством: S. I. Kryshtopa, та інші
Опубліковано: (2019)
Wearing features of oil scrapper piston rings with tin coating under bench tests for friction and wear
за авторством: T. S. Skoblo, та інші
Опубліковано: (2017)
за авторством: T. S. Skoblo, та інші
Опубліковано: (2017)
Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
за авторством: Zhang, K., та інші
Опубліковано: (2018)
за авторством: Zhang, K., та інші
Опубліковано: (2018)
Big data – librarian: opportunities for Ukraine
за авторством: I. Stambol
Опубліковано: (2021)
за авторством: I. Stambol
Опубліковано: (2021)
Friction and Wear of Aluminum Alloy Reinforced by Ti0₂ Particles
за авторством: Sarajan, Z.
Опубліковано: (2013)
за авторством: Sarajan, Z.
Опубліковано: (2013)
Friction and Wear of Aluminum Alloy Reinforced by Ti02 Particles
за авторством: Z. Sarajan
Опубліковано: (2013)
за авторством: Z. Sarajan
Опубліковано: (2013)
Kinetics of wear of steels with diffusion coatings under rolling friction
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
Local friction wear of elastic half-space with a protrusion
за авторством: O. P. Kozachok
Опубліковано: (2021)
за авторством: O. P. Kozachok
Опубліковано: (2021)
Surface Effect on the Nanowire Forest Indentation
за авторством: Yang, F.
Опубліковано: (2018)
за авторством: Yang, F.
Опубліковано: (2018)
Magnetoplastic Effect in Tests of Kinetic Indentation
за авторством: S. V. Sejdametov, та інші
Опубліковано: (2015)
за авторством: S. V. Sejdametov, та інші
Опубліковано: (2015)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
за авторством: Velizade, Evren S.
Опубліковано: (2020)
за авторством: Velizade, Evren S.
Опубліковано: (2020)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
за авторством: Velizade, Evren S.
Опубліковано: (2020)
за авторством: Velizade, Evren S.
Опубліковано: (2020)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
за авторством: E. S. Velizade
Опубліковано: (2020)
за авторством: E. S. Velizade
Опубліковано: (2020)
Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
за авторством: O. P. Vynohradova, та інші
Опубліковано: (2016)
за авторством: O. P. Vynohradova, та інші
Опубліковано: (2016)
Investigation of wear-resistance of high-nitrogen steels under dry sliding friction conditions
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2012)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2012)
The investigation of friction and wear characteristics of ion-plasma coatings, received on the aluminum alloy
за авторством: C. F. Dudnik, та інші
Опубліковано: (2004)
за авторством: C. F. Dudnik, та інші
Опубліковано: (2004)
Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
за авторством: Kong Dejun, та інші
Опубліковано: (2019)
за авторством: Kong Dejun, та інші
Опубліковано: (2019)
Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
за авторством: D. Kong, та інші
Опубліковано: (2019)
за авторством: D. Kong, та інші
Опубліковано: (2019)
Development of procedure for determination of wall thickness in NPP pipeline at erosion-corrosion wear of material
за авторством: I. V. Oryniak, та інші
Опубліковано: (2017)
за авторством: I. V. Oryniak, та інші
Опубліковано: (2017)
Indentation from macro- to nanometer level and examples of investigation of properties of materials with a special structure
за авторством: Ju. A. Khokhlova, та інші
Опубліковано: (2017)
за авторством: Ju. A. Khokhlova, та інші
Опубліковано: (2017)
The role of copper on the formation of surface friction wear resistant layers of high chrome cast iron
за авторством: V. V. Tykhonovych, та інші
Опубліковано: (2014)
за авторством: V. V. Tykhonovych, та інші
Опубліковано: (2014)
Search opportunities of catalogues of Vernadsky National Library of Ukraine and their rating by readers
за авторством: O. Poliakova, та інші
Опубліковано: (2017)
за авторством: O. Poliakova, та інші
Опубліковано: (2017)
Linear friction welding of metallic materials (Review)
за авторством: I. V. Zjakhor, та інші
Опубліковано: (2014)
за авторством: I. V. Zjakhor, та інші
Опубліковано: (2014)
Схожі ресурси
-
Plasticity of materials determined by the indentation method
за авторством: Yu. V. Milman, та інші
Опубліковано: (2018) -
Plasticity of materials determined by the indentation method
за авторством: Milman, Yu.V., та інші
Опубліковано: (2018) -
Procedure of the multiple indentations for determination of the hardness parameters of structurally heterogeneous materials
за авторством: V. I. Kushch, та інші
Опубліковано: (2015) -
Procedure of the multiple indentations for determination of the hardness parameters of structurally heterogeneous materials
за авторством: M. V. Karpets, та інші
Опубліковано: (2015) -
Evaluation of materials nanohardness by the spheroconical indenter
за авторством: V. I. Moshchenok, та інші
Опубліковано: (2017)