Buchumschlag

Technologies of manufacturing lining elements by the method of electroslag hardfacing in a current-conducting mould

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	A. V. Netiaha, Yu. M. Kuskov, V. M. Proskudin, V. O. Zhdanov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001353512
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Current-conducting mould in electroslag technologies
von: Yu. M. Kuskov, et al.
Veröffentlicht: (2022)

Formation of a layer of high-chromium cast iron in current-conducting mould of a square cross-section at electroslag surfacing
von: A. V. Netiaha, et al.
Veröffentlicht: (2021)

Electroslag surfacing of end faces with large-section electrode in current-conducting mould
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2017)

Application of non-conducting consumable billets at electroslag surfacing in current-supplying mould
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2018)

Influence of electrical current terminals on electromagnetic processes in a mould for electroslag surfacing of metal
von: Yu. M. Horyslavets, et al.
Veröffentlicht: (2022)

Electroslag surfacing of layers of different thicknesses in stationary current-supplying mould
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2018)

Formation of metal pool in current-supplying mould at electroslag process
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2019)

Optimization of the metal pool shape during electroslag melting in a stationary current-carrying mould for manufacturing of bimetallic products
von: V. G. Solovyov, et al.
Veröffentlicht: (2024)

Electroslag surfacing with large section electrode at direct current in a current-supplying mould
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2018)

Experimental study of slag and metal pool rotation in the electroslag process in current-supplying mould
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2018)

Equipment and materials for wear-resistant hardfacing of plate lining elements
von: A. P. Zhudra, et al.
Veröffentlicht: (2009)

Control of the process of base metal penetration at end face electroslag surfacing in current-supplying mould
von: V. G. Solovev, et al.
Veröffentlicht: (2018)

Selection of wear-resistant materials for electroslag surfacing of mining equipment parts in a current-conducting mould
von: Yu. M. Lankin, et al.
Veröffentlicht: (2022)

Application of chips in electroslag surfacing of dies in current-conducting mold
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2019)

Electroslag surfacing using discrete material of different methods of manufacture
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2015)

Modeling of electromagnetic processes in a sectional crystalizer for electroslag surfacing of metal
von: Yu. M. Horyslavets, et al.
Veröffentlicht: (2022)

Recycling of used noncompact tools from high-speed steel by electroslag remelting
von: Yu. M. Kuskov, et al.
Veröffentlicht: (2022)

Criteria of selection of designs of cast moulds for centrifugal electroslag casting
von: S. V. Skripnik, et al.
Veröffentlicht: (2011)

Influence of electric parameters of surfacing with discrete filler in current-supplying mould on velocity of slag pool rotation
von: Ju. M. Kuskov
Veröffentlicht: (2018)

Modernization of ESR furnaces into installations for ESS of mill rolls in a current-carrying mould
von: Yu. M. Kuskov, et al.
Veröffentlicht: (2021)

Studies of coatings produced by high-velocity oxyfuel spraying using cermet powder based on FeMoNiCrB amorphizing alloy
von: A. V. Netiaha, et al.
Veröffentlicht: (2022)

Influence of process and electrical parameters of ESS in current-supplying mould on electrode melting rate and penetration of base metal
von: V. G. Solovev, et al.
Veröffentlicht: (2018)

Manufacture of consumable electrodes for magnetically-controlled electroslag melting of titanium
von: I. V. Protokovilov, et al.
Veröffentlicht: (2013)

Method of manufacture of large-sized forge-cast billets by electroslag welding
von: A. I. Voloshin, et al.
Veröffentlicht: (2012)

New equipment for hardfacing of cones and bells of charging devices
von: A. P. Zhudra, et al.
Veröffentlicht: (2009)

Effect of tellurium on microstructure of low-alloyed cast iron deposited by electroslag method in current-carrying mold
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2019)

Manufacturing large-sized beds by consumable-nozzle electroslag welding
von: K. P. Shapovalov, et al.
Veröffentlicht: (2015)

Modern methods for hardfacing of operating tools of tillage and harvester agricultural machinery (Review)
von: V. S. Senchishin, et al.
Veröffentlicht: (2012)

Electroslag melting in an open mould of ingots from sheet scrap wastes of titanium VT1-0
von: D. I. Bilonyk, et al.
Veröffentlicht: (2022)

Optimum reduction of operating pressure in pipeline in hardfacing repair of thinning areas
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: B. P. Taran, et al.
Veröffentlicht: (2013)

Structure and properties of ingots produced from sheet cuttings of VT-1 titanium by electroslag remelting in an open mould
von: D. I. Bilonyk, et al.
Veröffentlicht: (2023)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: Таран, Борис Петрович, et al.
Veröffentlicht: (2014)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: Таран, Борис Петрович, et al.
Veröffentlicht: (2014)

Physical–chemical properties of fluxes for electroslag technologies
von: R. V. Kozin, et al.
Veröffentlicht: (2016)

Hollow-section machine-building billets, made by centrifugal electroslag casting manufacturing perspectives
von: S. V. Skripnik, et al.
Veröffentlicht: (2011)

Strengthening the surface layer of CCM mould copper plates by hafnium with application of plasma-arc technology
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Electroslag technologies of producing large forge ingots
von: L. B. Medovar, et al.
Veröffentlicht: (2010)

lnluence of lux composition on the process of electroslag surfacing of end faces with discrete feeding of fller material
von: Ju. M. Kuskov
Veröffentlicht: (2018)

Electric conductivity of slag pool in electroslag welding with wire electrode
von: Ju. N. Lankin, et al.
Veröffentlicht: (2009)