Structure and properties of tool material from exothermic mixture of Cr2O3–AlN micropowders during hot pressing
Збережено в:
| Дата: | 2020 |
|---|---|
| Автори: | M. M. Prokopiv, O. V. Kharchenko |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
2020
|
| Назва видання: | Superhard Materials |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001195657 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
-
Thermal conductivity of hot-pressed AlB12–AlN ceramic composite
за авторством: T. O. Prikhna, та інші
Опубліковано: (2024) -
A new ceramic material with a gradient structure obtained from an exothermic mixture of ZrO2-Al-C in contact with a eutectic mixture 68Al2O3–32ZO2 in the process of free sintering
за авторством: M. M. Prokopiv, та інші
Опубліковано: (2022) -
Alloying of materials by metallic micropowders
за авторством: K. M. Khranovska, та інші
Опубліковано: (2010) -
Modeling of process of melting of electrodes with exothermal mixture in coating during repair welding and surfacing
за авторством: A. M. Kushchij, та інші
Опубліковано: (2015) -
Intensification of arc and electroslag processes of welding by means of exothermal mixture introduction
за авторством: A. F. Vlasov, та інші
Опубліковано: (2017)