Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	L. M. Devin, M. E. Stakhniv, M. P. Mazur
Format:	Artikel
Sprache:	English
Veröffentlicht:	2020
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001195663
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Investigation of cutting temperature in turning cutters with diamond-carbide plates
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
von: N. E. Stakhniv, et al.
Veröffentlicht: (2018)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
von: L. N. Devin, et al.
Veröffentlicht: (2018)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
von: N. E. Stakhniv, et al.
Veröffentlicht: (2019)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
von: N. E. Stakhniv
Veröffentlicht: (2017)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

A mechanism of diamond-abrasive finishing of monocrystalline silicon carbide
von: Ju. D. Filatov, et al.
Veröffentlicht: (2013)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
von: L. N. Devin, et al.
Veröffentlicht: (2019)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

Axial force when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)

The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

The Fine Structure of the Surface Layer and Tribological Properties of QT 41Cr4 Steel Parts after Finish Turning Machining with Coated Cutters
von: M. Enek, et al.
Veröffentlicht: (2014)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts
von: Anshuman Das, et al.
Veröffentlicht: (2019)

Study of performance of cbn incisors "borsinit" when turning titanium alloy VT1-0
von: L. N. Devin, et al.
Veröffentlicht: (2016)

Investigation of acoustic emission signal on the stage of penetretion and exit when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2022)

The correlation model of acoustic emission in fine diamond turning
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Effect of thermobaric treatment on the structural and phase transformations in diamonds with lonsdalite, natural and synthetic diamonds
von: A. V. Nozhkina, et al.
Veröffentlicht: (2016)

Development of technology of brazing of diamond-hardalloy cutters
von: B. F. Stefaniv
Veröffentlicht: (2013)

Investigations of the quality of wrought semi-finished products of VT9 titanium alloy produced by electron beam melting
von: S. V. Akhonin, et al.
Veröffentlicht: (2021)

Modification of high speed steels by nanostructured materials for manufacture cutting inserts cutters of mining machines
von: L. V. Sudnik, et al.
Veröffentlicht: (2017)

Peculiarities of calculating the geometric parameters of a diamond cutter for the formation of ring Fresnel lenses
von: Зенін, В. М., et al.
Veröffentlicht: (2024)

Finishing spur gears worm diamond elasticity hons
von: A. V. Krivosheja, et al.
Veröffentlicht: (2016)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

Investigation of the process of manufacturing a jewelry insert from a synthetic diamond obtained by the hpnt-method
von: S. A. Mazanaeva, et al.
Veröffentlicht: (2017)

Effect of damping properties of cutters on the probability of failure of the CBN plates
von: L. M. Devin, et al.
Veröffentlicht: (2016)

Ensuring fatigue life of parts during finish turning with cubic boron nitride tools
von: K. S. Barandych, et al.
Veröffentlicht: (2018)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

Comparative estimation of the performance of drilling bits with diamond-containing matrix and inserts from diamond-containing composites
von: O. P. Vynohradova, et al.
Veröffentlicht: (2022)

An increase of operating characteristics of cBN cutters by improving their damping properties
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Effect of structure of joint zone of diamond layer with hard-alloy substrate of brazed cutters on their service life
von: B. V. Stefaniv, et al.
Veröffentlicht: (2018)

Effect of thermal treatment on the content and properties of the diamond-CaMg(CO3)2 composite obtained by thermobaric sintering
von: A. S. Osipov, et al.
Veröffentlicht: (2019)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

Improving efficiency of finishing natural stone using diamond–polymer fiber tools
von: V. D. Kurilovych, et al.
Veröffentlicht: (2014)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
von: B. V. Stefaniv
Veröffentlicht: (2013)