Buchumschlag

Comparative study on a physical model of specific features of top blowing through the tip with folded nozzles when blowing single-phase liquids

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	S. I. Semykin, T. S. Holub
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001243652
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Research on the physical model of features of the behavior of a two-phase bath at top blowing through a tip with folded nozzles
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

Research of the influence of low potential on bihavior splashing of liquid when its top blowing by physical simulation
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Splashes of liquid phases at the top of the oxygen blowing
von: V. B. Okhotskij
Veröffentlicht: (2013)

High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2019)

Improving the efficiency of converter bath top-blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Investigation on physical model of converter process of features of electric potential influence on nature of liquid spraying at top blowing out
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

Studying the Possibility of Using Coherent Type Nozzles for Bof Blowing at the Gas Dynamic Simulation Stand
von: T. S. Golub, et al.
Veröffentlicht: (2023)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: Semykin, S.I., et al.
Veröffentlicht: (2020)

Industrial researches of features of influence of electric impacts on the number of metal drops in slag at the top oxygen blowing
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Providing safety and safe keeping of blast furnaces lining of at blow-out and blowing in
von: V. I. Bolshakov, et al.
Veröffentlicht: (2009)

The nature of bifocal source of the earthquake and precursors of the blow
von: Nikolaevskiy, V., et al.
Veröffentlicht: (2015)

Problems of blowing pulverized coal into blast furnaces
von: V. N. Zakharchenko, et al.
Veröffentlicht: (2018)

The nature of bifocal source of the earthquake and precursors of the blow
von: V. N. Nikolaevskij, et al.
Veröffentlicht: (2015)

The influence of blowing on hydrodynamics of metal in the casting ladle
von: M. K. Siharov, et al.
Veröffentlicht: (2016)

Slag formation control during BOF blowing
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2016)

The study of peculiarities of formation and removal of droplets by blowing one- and two-phase liquids on the model of the LD-Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

On blow-up solutions and dead zones in semilinear equations
von: Gutlyanskii, V.Ya., et al.
Veröffentlicht: (2018)

Behavior of blow-up solutions for quasilinear parabolic equations
von: Ye. O. Yevhenieva
Veröffentlicht: (2020)

Blowing steel of inert gas in six-strand tundish
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
von: S. I. Semykin, et al.
Veröffentlicht: (2021)

Investigation of the effect of slag on mixing of a bucket bath at bottom blowing by a method of physical modeling
von: V. P. Piptiuk, et al.
Veröffentlicht: (2018)

On local blow-up of solutions of quasilinear elliptic and parabolic inequalities
von: Muravnik, A.B.
Veröffentlicht: (2006)

Converter bath mixing peculiarities during upper and combined blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Boron removal from metallurgical grade silicon and Si-Sn alloy through slag refining with gas blowing
von: Rowaid Al-khazraji, et al.
Veröffentlicht: (2018)

Main provisions blowing blast furnaces after stops of varying duration
von: A. M. Kuznetsov, et al.
Veröffentlicht: (2015)

Formation of metal drops in slag phase at steel blowing inert gas in the tundish
von: V. G. Efimova
Veröffentlicht: (2014)

Study of heat losses in the blast furnace by blowing a horn pulverized coal
von: V. I. Andreev, et al.
Veröffentlicht: (2014)

Method of calculation the processes in tuyere for blowing a desulphurizer into the melt in a ladle
von: N. V. Kosolap, et al.
Veröffentlicht: (2011)

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Integral Estimation of Harmful Blow-Out With Consideration of Combined Action of Toxical Pollutants
von: S. D. Tsybulja, et al.
Veröffentlicht: (2014)

Influense of blowing of Inert gas purge in the tundish on the distribution of non-metallic Inclusions
von: V. G. Efimova, et al.
Veröffentlicht: (2014)

The integrated accounting of temperature-blowing regime of the blast furnace for problems of prediction structure product melting in specific raw materials and technological conditions
von: A. I. Belkova, et al.
Veröffentlicht: (2015)

Analytical study of the characteristics of streams flowing from nozzles of compound-type construction
von: S. I. Semykin, et al.
Veröffentlicht: (2022)

A parabolic equation for the fractional Laplacian in the whole space: blow-up of nonnegative solutions
von: T. Kenzizi
Veröffentlicht: (2019)

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2018)

High temperature modeling of BOF bath blowing by using three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

A parabolic equation for the fractional Laplacian in the whole space: blow-up of nonnegative solutions
von: Kenzizi, T., et al.
Veröffentlicht: (2026)