Effect of carbon on the corrosion behavior of thermally hardened rolled products
Gespeichert in:
| Datum: | 2020 |
|---|---|
| 1. Verfasser: | V. H. Razdobrieiev |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2020
|
| Schriftenreihe: | Fundamental and applied problems of ferrous metallurgy |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0001243658 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)
Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2011)
von: V. E. Gromov, et al.
Veröffentlicht: (2011)
Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2019)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2019)
Thin crystal structure low-carbon steels after deformational -thermal processing in an intercritical interval of temperatures
von: V. H. Razdobrieiev
Veröffentlicht: (2009)
von: V. H. Razdobrieiev
Veröffentlicht: (2009)
The influence of mechanical and corrosion defects on strength of thermally hardened reinforcement bars of 35HS steel
von: Ya. Blikharskyi, et al.
Veröffentlicht: (2018)
von: Ya. Blikharskyi, et al.
Veröffentlicht: (2018)
Modern trends in the production of corrosion-resistant and fire-resistant stress-free reinforcing bars
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2020)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2020)
Study of the effect of microalloying with boron on the corrosion behavior of low-carbon structural steel in different structural states
von: V. G. Razdobreev
Veröffentlicht: (2019)
von: V. G. Razdobreev
Veröffentlicht: (2019)
Effect of Forging on Cyclic Hardening Behavior of CW 614 Brass Alloy
von: Mnif, R., et al.
Veröffentlicht: (2011)
von: Mnif, R., et al.
Veröffentlicht: (2011)
Influence of thermal strengthening technology on variability of mechanical properties of rolled metal product
von: E. V. Parusov, et al.
Veröffentlicht: (2020)
von: E. V. Parusov, et al.
Veröffentlicht: (2020)
Modern trends in the production of corrosion-resistant and fire-resistant prestressing reinforcing bars
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2021)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2021)
The effect of dispersion nitride hardening on the parameters of γ→α transformation in night-carbon steels
von: Ja. Shipitsyn, et al.
Veröffentlicht: (2017)
von: Ja. Shipitsyn, et al.
Veröffentlicht: (2017)
Influence on bainitic hardening properties and structural states of reinforcing rolled steel 30GS
von: G. V. Levchenko, et al.
Veröffentlicht: (2014)
von: G. V. Levchenko, et al.
Veröffentlicht: (2014)
Isothermal hardening of iron-carbon alloys combined with their casting
von: V. S. Doroshenko, et al.
Veröffentlicht: (2024)
von: V. S. Doroshenko, et al.
Veröffentlicht: (2024)
The influence of ultrasound on anti-corrosion properties of carbonate scale during its thermal formation
von: Yu. S. Herasymenko, et al.
Veröffentlicht: (2018)
von: Yu. S. Herasymenko, et al.
Veröffentlicht: (2018)
Physicomechanical and corrosion-resistant properties of inhibited fast-hardening bitumen-latex emulsions
von: V. A. Chervatiuk, et al.
Veröffentlicht: (2015)
von: V. A. Chervatiuk, et al.
Veröffentlicht: (2015)
Effect of soil particle size on the electrochemical corrosion behavior of pipeline steel in saline solution
von: He, B., et al.
Veröffentlicht: (2015)
von: He, B., et al.
Veröffentlicht: (2015)
Effect of soil particle size on the electrochemical corrosion behavior of pipeline steel in saline solution
von: B. He, et al.
Veröffentlicht: (2015)
von: B. He, et al.
Veröffentlicht: (2015)
Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)
The effect of temperature and carbon dioxide pressure on corrosion and corrosion-mechanical fracture of pipe steels in model seam water
von: V. A. Vynar, et al.
Veröffentlicht: (2020)
von: V. A. Vynar, et al.
Veröffentlicht: (2020)
Influence of dispersion nitride hardening on formation of structure of high-carbon steels
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2017)
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2017)
Inductor for continuous heating in thermal hardening of railway rail head
von: E. A. Pantelejmonov, et al.
Veröffentlicht: (2015)
von: E. A. Pantelejmonov, et al.
Veröffentlicht: (2015)
Problems of development of industrial usage of technology of double-roll casting and rolled of aluminum and iron-carbon alloys
von: I. R. Baranov
Veröffentlicht: (2018)
von: I. R. Baranov
Veröffentlicht: (2018)
Effect of the oxidation and thermal treatment on bromination of activated carbon
von: K. I. Veselovska, et al.
Veröffentlicht: (2015)
von: K. I. Veselovska, et al.
Veröffentlicht: (2015)
Quantitative model for the prediction of the corrosion rate of cold-rolled 316L steel
von: A. Dittes, et al.
Veröffentlicht: (2023)
von: A. Dittes, et al.
Veröffentlicht: (2023)
Effects of Injection of Carbon Nanotubes on EEG and Results of a Behavioral Test in Rats
von: V. Azimirad, et al.
Veröffentlicht: (2015)
von: V. Azimirad, et al.
Veröffentlicht: (2015)
About the parents of brittle fracture in high-carbon rolled wire
von: A. I. Trotsan, et al.
Veröffentlicht: (2013)
von: A. I. Trotsan, et al.
Veröffentlicht: (2013)
Thermal and physical of condition carbon steel and its effect on the formation of a thermal barrier at a local thermal effect
von: O. M. Savytskyi
Veröffentlicht: (2015)
von: O. M. Savytskyi
Veröffentlicht: (2015)
Corrosion inhibition of carbon steel by xantane biopolymer
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2019)
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2019)
Before food about the decision of border mines to the process of rolling-fiber in balanced roller fibers
von: Yu. Kliuchnikov, et al.
Veröffentlicht: (2021)
von: Yu. Kliuchnikov, et al.
Veröffentlicht: (2021)
High-pressure behaviors of carbon nanotubes
von: Zhao, Z.S., et al.
Veröffentlicht: (2012)
von: Zhao, Z.S., et al.
Veröffentlicht: (2012)
High-pressure behaviors of carbon nanotubes
von: Z. S. Zhao, et al.
Veröffentlicht: (2012)
von: Z. S. Zhao, et al.
Veröffentlicht: (2012)
Corrosion behavior of cobalt–molybdenum alloys in chloride solutions
von: V. V. Shtefan, et al.
Veröffentlicht: (2018)
von: V. V. Shtefan, et al.
Veröffentlicht: (2018)
Selection of thermal modes of welding hardening steels of different structural classes
von: Ju. Skulskij
Veröffentlicht: (2009)
von: Ju. Skulskij
Veröffentlicht: (2009)
Pressure effects on the percolation behavior of systems based on polyethylene oxide and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2016)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2016)
Pressure effects on the percolation behavior of systems based on polyethylene oxide and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2016)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2016)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
von: Krivchik, L., et al.
Veröffentlicht: (2021)
von: Krivchik, L., et al.
Veröffentlicht: (2021)
Effect of isothermal quenching temperature on strain hardening of ADI
von: K. O. Hohaev, et al.
Veröffentlicht: (2020)
von: K. O. Hohaev, et al.
Veröffentlicht: (2020)
Electric field effect on the percolative behavior of systems based on polyethylene glycol and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2014)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2014)
Electric field effect on the percolative behavior of systems based on polyethylene glycol and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2014)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2014)
The increase of corrosion monitoring validity for low-carbon steel in tap water
von: Yu. Herasymenko, et al.
Veröffentlicht: (2017)
von: Yu. Herasymenko, et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022) -
Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2011) -
Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2019) -
Thin crystal structure low-carbon steels after deformational -thermal processing in an intercritical interval of temperatures
von: V. H. Razdobrieiev
Veröffentlicht: (2009) -
The influence of mechanical and corrosion defects on strength of thermally hardened reinforcement bars of 35HS steel
von: Ya. Blikharskyi, et al.
Veröffentlicht: (2018)