Cover Image

Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling

Saved in:

Bibliographic Details
Date:	2020
Main Authors:	S. V. Bobyr, S. S. Zakharchuk, Yu. Prykhodko, P. V. Krot, D. V. Loshkarev
Format:	Article
Language:	English
Published:	2020
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001243663
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
by: S. V. Bobyr, et al.
Published: (2017)

Regularities of the retained austenite formation in the complexly alloyed steel (overview)
by: S. V. Bobyr, et al.
Published: (2021)

Rheological properties of steel at roll casting-rolling
by: O. V. Nohovitsyn, et al.
Published: (2014)

Information-analytical system of stabilization properties of rolled steel
by: E. V. Prykhodko, et al.
Published: (2011)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
by: S. E. Kondratiuk, et al.
Published: (2016)

Computer simulation and sheet rolling process control systems of Iron and Steel Institute
by: Ju. Prikhodko
Published: (2014)

Training hot rolled strips and sheets of especially thin
by: V. S. Panchenko, et al.
Published: (2014)

Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures
by: He, T., et al.
Published: (2017)

Possible options for the production of tinplate and cold-rolled sheet in Ukraine
by: Ju. V. Konovalov, et al.
Published: (2015)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
by: Ju. Gridin, et al.
Published: (2013)

Influence on bainitic hardening properties and structural states of reinforcing rolled steel 30GS
by: G. V. Levchenko, et al.
Published: (2014)

Salculation of Temperature in strips casting-rolling steel
by: A. V. Nogovitsyn, et al.
Published: (2014)

Technology and equipment for manufacture of high-pressure cylinder bodies of sheet rolled metal
by: M. M. Savitskij, et al.
Published: (2010)

Analytical models of austenite transformation in steel with allowance for internal stresses
by: S. V. Bobyr
Published: (2018)

Profiling bypass rolls for improving the flatness of the bands at the cold rolling
by: V. A. Nikolaev, et al.
Published: (2009)

Steel strip solidification in twin-roll casting unit
by: N. I. Tarasevich, et al.
Published: (2016)

Features of forming rolled formed sections in the rolls of the mill
by: M. E. Doktorov, et al.
Published: (2013)

Neutral corner while rolling in the non-driving rolls
by: A. I. Leshchenko, et al.
Published: (2012)

Process Analysis and Trial Tests for Hot-Rolled Stainless Steel/Carbon Steel Clad Plates
by: Chen, Z.Y., et al.
Published: (2019)

Peculiarities of technology of production of sheet rolled metal from wastes of titanium sponge and its products
by: V. S. Konstantinov, et al.
Published: (2009)

The implementation of the thermomechanical controlled rolling technology in rolling mill 1700
by: A. G. Kurpe, et al.
Published: (2017)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
by: Guan, B., et al.
Published: (2018)

About the austenite transformation kinetics in steels under non-equilibrium conditions
by: M. F. Evsjukov, et al.
Published: (2013)

Kinetics of wear of steels with diffusion coatings under rolling friction
by: P. V. Kaplun, et al.
Published: (2020)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
by: L. K. Leshchynskyi, et al.
Published: (2021)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
by: A. M. Nesterenko, et al.
Published: (2009)

Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
by: V. E. Gromov, et al.
Published: (2011)

Coefficient of crystallization speed twin-roll casting steel and aluminium
by: A. V. Nogovitsyn, et al.
Published: (2013)

Amplitude-dependent internal friction in AZ31 alloy sheets submitted to accumulative roll bonding
by: Z. Trojanova, et al.
Published: (2018)

Amplitude-dependent internal friction in AZ31 alloy sheets submitted to accumulative roll bonding
by: Trojanová, Z., et al.
Published: (2018)

Integrated methods for estimation the efficiency of production of flat rolled steel in different integrated units for casting and rolling processing combination
by: S. A. Vorobej, et al.
Published: (2013)

Analysis of the asymmetrically rolling parameters of titanium powder
by: Ju. Prikhodko, et al.
Published: (2015)

Effect of controlled rolling on the structural and phase transformations
by: I. E. Volokitina, et al.
Published: (2023)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
by: T. N. Golubenko, et al.
Published: (2012)

Peculiarities of mathematical modelling for steel ingots heating before rolling
by: E. N. Shebanits, et al.
Published: (2012)

Sheet foundry-rolling machine for PJSC &quot;ArcelorMittal Krivoy Rog&quot;
by: Ju. V. Konovalov, et al.
Published: (2015)

Application of structural steels in above-ground cylindrical tanks construction after normalized rolling
by: A. Y. Barvinko, et al.
Published: (2023)

On the kinetics of bainite transformation of austenite in steel during heat treatment in the production flow
by: M. F. Evsjukov, et al.
Published: (2014)

Analytical study of technological and design parameters of section casting-and-rolling unit&#039;s influence on finished rolled steel accuracy
by: S. I. Badjuk
Published: (2013)

Process and property of hot-rolled stainless steel/carbon steel cladding bar
by: Zhining Jia, et al.
Published: (2016)