Buchumschlag

The structural heredity demonstration and its effect on the properties of hot-rolled tubing stocks of various diameters

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	T. V. Balakhanova, H. V. Levchenko, Yu. Borysenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001327236
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Structure and properties of hot-rolled boiler tubes made from continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)

Improved hot pilger tube rolling by controlling the clearance between the sleeve and the dorn
von: V. F. Balakin, et al.
Veröffentlicht: (2015)

Heredity and transformation of cast steel structure at hot deformation and thermal treatment
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2009)

Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)

Definition of speed limits continuous high-speed rolling of wire of a various diameter at use reducucing-calibration of the block
von: A. A. Gorbanev, et al.
Veröffentlicht: (2015)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2015)

Preparation of the surface of hot-rolled strips for hot-dip galvanized
von: V. G. Ivanchenko
Veröffentlicht: (2014)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

Estimation of the flux tube diameters outside sunspots using Hinode observations. Preliminary results
von: Botygina, O.O., et al.
Veröffentlicht: (2016)

Estimation of the flux tube diameters outside sunspots using Hinode observations. Preliminary results
von: O. O. Botygina, et al.
Veröffentlicht: (2016)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)

Process and property of hot-rolled stainless steel/carbon steel cladding bar
von: Zhining Jia, et al.
Veröffentlicht: (2016)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

Structural heredity formation during remelting of steels at non-equilibrium and structural heredity of charge materials
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2012)

Experimental study of ignition and burning of DC discharge at various diameters of the anode
von: V. A. Lisovskij, et al.
Veröffentlicht: (2010)

Training hot rolled strips and sheets of especially thin
von: V. S. Panchenko, et al.
Veröffentlicht: (2014)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
von: T. N. Golubenko, et al.
Veröffentlicht: (2012)

Determination of railway rolling stock optimal movement modes
von: Petrenko, O., et al.
Veröffentlicht: (2017)

DETERMINATION OF RAILWAY ROLLING STOCK OPTIMAL MOVEMENT MODES
von: Petrenko, A. N., et al.
Veröffentlicht: (2017)

The development of scientific methods of research for the railways rolling stock
von: O. Strelko, et al.
Veröffentlicht: (2017)

Renewal of rolling stock is a strategic goal of railways
von: A. Rachynska
Veröffentlicht: (2016)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)

Demonstrations of the edge effect in the benthic invertebrate assemblages of the Danube delta
von: A. V. Liashenko, et al.
Veröffentlicht: (2021)

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2019)

The estimation method to determine the influence of the factors in hot-rolled metal production technology on the stability of the mechanical properties
von: S. A. Vorobej, et al.
Veröffentlicht: (2017)

Hot-cracking of high-alloyed steels evaluated by wedge rolling test
von: Schindler, I., et al.
Veröffentlicht: (2008)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: Makeeva, A.S., et al.
Veröffentlicht: (2016)

Pecularities of electron beam welding of hot-rolled aluminum-lithium alloys
von: D. Drimal, et al.
Veröffentlicht: (2019)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
von: Ju. Prikhodko, et al.
Veröffentlicht: (2019)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: A. S. Makeeva, et al.
Veröffentlicht: (2016)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
von: O. M. Moroz, et al.
Veröffentlicht: (2015)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)

Status and trends of development of the production of cold-rolled tubes from titanium alloys
von: A. V. Mishchenko
Veröffentlicht: (2019)

DEMONSTRATIVE BASIS OF THE PARADIGM BANGING OF THE EARTH
von: MURAVEINYK, Yu.A.
Veröffentlicht: (2013)

Concerning the demonstration of one theorem of Grunbaum
von: Petrenyuk, A. Ya., et al.
Veröffentlicht: (1971)

Evaluation of the quality of technological processes for surfacing of parts of railway rolling stock
von: V. V. Artemchuk
Veröffentlicht: (2012)

Physical fundamentals of metallurgical heredity of alloys at melting and crystallization
von: Yu. Volosevych, et al.
Veröffentlicht: (2016)

Generalization of research results on the dynamics of continuous wide-strip hot-rolling mills
von: V. V. Verenev
Veröffentlicht: (2018)