Joining of steel and dissimilar material joints with highest strength — there are other ways than conventional welding
Збережено в:
Дата: | 2019 |
---|---|
Автори: | U. Reisgen, L. Stein |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
2019
|
Назва видання: | Automatic Welding |
Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000964942 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
-
Laser-arc welding of high-strength steels with yield strength of more than 700 MPa
за авторством: V. D. Poznjakov, та інші
Опубліковано: (2015) -
Use of magnetic pulse welding for joining plates from similar and dissimilar alloys
за авторством: M. A. Polieshchuk, та інші
Опубліковано: (2020) -
Influence of welding wire composition on weld quality in welded joints of dissimilar steels in gas-shielded mechanized welding
за авторством: V. P. Elagin
Опубліковано: (2017) -
Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
за авторством: Guo, N., та інші
Опубліковано: (2015) -
Influence of welding modes on decarburization in the haz of R91 steel in welded joints of dissimilar steels after high-temperature tempering
за авторством: M. O. Nimko, та інші
Опубліковано: (2022)